Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Dresden, Kansas

Are you looking for work-ready & reliable machinery to kick start a construction project in Dresden ?

Whether you’ve been awarded a construction project already or are exploring potential tie-ups for heavy construction equipment rentals in Dresden, let us tell you that we can put you in touch with the right vendors within a day or two!

Yes, we’ve onboard a large network of vendors with work-ready construction equipment. You can rent equipment on a daily, weekly or monthly basis, as you see fit. So, you need not spend a dime extra on equipment you acquire on a rental basis.

As soon as you call us at our toll free number or get in touch through the short contact form on the right, we will start working on finding the best vendor for you.

The process normally takes 6 to 48 hours to complete.

Equipment Rental Dresden, Construction equipment rental Dresden, Construction Dresden, Heavy Equipment Rental Dresden.

Komatsu Trucks HD325-7
HD325-7 Off-Highway Truck

The HD325-7 is a 40 ton capacity workhorse. Very maneuverable, the MacPherson front suspension give the HD325-7 a turning radius tighter than other trucks in its class. With two working modes the operator can most effectively take advantage of the fully automatic seven speed transmission with lock-up feature. A hydropneumatic suspension gives the operator a comfortable ride while maintaining more material in the bed for more production.

Engine
Model KOMATSU SAA6D140E-5
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, air-to-air after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.5" x 6.5" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Horsepower:
SAEJ1995 - Gross 518 HP 386 kW
ISO 9249 / SAEJ1349 - Net 498 HP 371 kW
Rated rpm 2,000 rpm
Fan drive type Mechanical
Maximum torque 1,600 lb•ft 221 kg-m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system : Full-flow type
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner, plus dust indicator
EPA Tier 3 and EU Stage 3A emission certified.
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission: Full-automatic, planetary type
Speed range 7 speeds forward and 1 reverse
Lockup clutch Wet, single-disk clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive
Shift control Electronic shift control with automatic clutch modulation in all gears
Maximum travel speed 43.5 mph 70 km/h
Axles
Rear axle Full-floating
Final drive Planetary gear
Ratios:
Differential 3.125
Planetary 4.737
Suspension System
Type Fully hydraulic power steering with two double-acting cylinder
Supplementary steering Manual control (meets ISO 5010, SAE J1511 and SAE J53)
Auxiliary steering SAE automatic
Minimum turning radius 23'7'' 7.2 m
Maximum steering angle 43°
Cab
Dimensions comply with ISO 3471 and SAE J1040-1988c ROPS (Roll-Over Protective Structure) standards.
Main Frame
Type Box-sectioned structure
Brakes
Brakes meet ISO 3450 and SAE 1473 standards
Service brakes:
Front Full-hydraulic control, caliper disc type
Rear full-hydraulic, oil-cooled, multiple-disc type
Parking brake Spring applied, multiple-disc type
Retarder Oil-cooled, multiple-disc rear brakes act as retarder
Secondary brake Manual pedal operation When hydraulic pressure drops below the rated level, parking brake is automatically actuated
Brake surface
Front 50 in 2 968 cm2
Rear 7,881 in 2 50847 cm2
Body
Capacity:
Struck 23.5 yd3 18 m3
Heaped (2:1 ,SAE) 31.4 yd3 24 m3
Payload, maximum 40 U.S. tons 36.5 metric tons
rated 35 U.S. tons 32 metric tons
Material : (high-tensile-strength steel) 184,860 ps 130 kg/mm2
Structure V-shape body
Material thickness:
Bottom
Struck 0.75" 19 mm
Front 0.47" 12 mm
Sides 0.35" 9 mm
Target area (inside length x width) 18'1" x 11'1" 5500 mm x 3380 mm
Dumping angle 48°
Height at full dump 26'0" 7925 mm
Heating Exhaust heating
HyDRaulic System
Hoist cylinder Twin, 2-stage telescopic type
Relief pressure 2,990 psi 210 kg/cm2
Hoist time 10 sec
Weight
Empty weight 69,700 lb 31600 kg
Gross vehicle weight with 32 metric ton (35 U.S.ton) payload 140,390 lb 63680 kg
Max. gross vehicle weight:
Standard tire 152,740 lb 69280 kg
Not to exceed max. gross vehicle weight, including options, fuel
Weight distribution:
Empty: Front axle 51.7%
Rear axle 48.3%
Loaded: Front axle 33%
Rear axle 67%
tires
Standard Tires 18.00-33-32PR
Service Refill Capacities
Fuel tank 127.9 U.S. Gal 484 ltr.
Engine oil 13.2 U.S. Gal 50ltr
Torque converter, transmission and retarder cooling 23.8 U.S. Gal 90 ltr
Differential 11.9 U.S. Gal 45 ltr
Final drive (left and right) 7.9 U.S. 30 ltr
Hydraulic system 34.1 U.S. gal 129 ltr
Suspension (total) 11.7 U.S. gal 44.2 ltr

New Holland Crawler Excavators E245C

Specifications
Engine Power 129 kW/173 hp
Operating weight 25.4/25.1 t

JCB Compaction Equipment VMT 160-90

VMT 160-90

The JCB VMT 160-90 road roller is designed to offer high productivity and reliability with maximum operating economy, excellent serviceability and operation safety. The ideal combination of static weights, centrifugal forces and amplitudes makes this roller compactor perfect for a wide range of both soil and asphalt applications, from rolling sub-base to finish rolling.

Thanks to excellent maneuverability and a compact design, VMT 160-900 compaction rollers are also ideal for a wide range of workplaces, including yards, access roads, residential streets, car parks, roads, highways and airports.

Weighing 3628lb (1650kg) and powered by a Kubota 23hp (17kW) motor, the VMT 160-90 is our smallest road roller. It has an operating width of 38.6in (980mm) and generates centrifugal forces of 5845 to 10,116lbf (26 to 45kN). There's an adjustable seat for comfort and productivity.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics