Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Elmdale, Kansas

Are you looking for work-ready & reliable machinery to kick start a construction project in Elmdale ?

Whether you’ve been awarded a construction project already or are exploring potential tie-ups for heavy construction equipment rentals in Elmdale, let us tell you that we can put you in touch with the right vendors within a day or two!

Yes, we’ve onboard a large network of vendors with work-ready construction equipment. You can rent equipment on a daily, weekly or monthly basis, as you see fit. So, you need not spend a dime extra on equipment you acquire on a rental basis.

As soon as you call us at our toll free number or get in touch through the short contact form on the right, we will start working on finding the best vendor for you.

The process normally takes 6 to 48 hours to complete.

Equipment Rental Elmdale, Construction equipment rental Elmdale, Construction Elmdale, Heavy Equipment Rental Elmdale.

New Holland Skid Steer Loader L223

New Holland Skid Steer Loader L223
THE SUPER BOOM® ADVANTAGE
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model FPT / F5H FL463
Bore/stroke, in (mm) 3.9 x 4.1 (99 x 110)
Displacement, in3 (L) 195 (3.2)
Fuel injection HPCR Direct
Air intake Turbocharged with external CEGR
Horsepower per SAE J1349 Gross hp (kW) 74 (55) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW) 68 (51) @ 2500 rpm
Peak torque, lb-ft (Nm) 232 (314) @1400 rpm
Power Train
Travel speed, low range, mph (km/h) 7.0 (11.3)
Travel speed, high range (optional),mph (km/h) 10.5 (16.9)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 129.4 (3287)
Top of ROPS, in (mm) 78.8 (2002)
Bottom of level bucket, fully raised,in (mm) 122.6 (3115)
Overall length without attachment with coupler, in (mm) 117.8 (2993)
Dump angle, degrees 55°
Dump reach (max height), in (mm) 32.3 (821)
Rollback, bucket on ground, degrees 34°
Rollback, bucket at full height, degrees 85°
Wheelbase, in (mm) 52 (1322)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 24°
Clearance circle without bucket, in(mm) 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Rear axle to bumper, in (mm) 40.7 (1034)
Overall width, in (mm) 69.6 (1768)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 24.2 (91.5)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2250 (1020)
Tipping load, lbs (kg) 4500 (2045)
Breakout force, lift cylinder, lbs (kN) 5080 (22.6)
Breakout force, bucket cylinder, lbs (kN) 8620 (38.3)
Operating weight, lbs (kg) 7400 (3350)

Engine Powered Scissor Lifts 4394RT

JLG Engine Powered Scissor Lifts 4394RT
Key Specs

  • Machine Width: 7 ft 10 in. / 2.39 m
  • Platform Capacity: 1500 lb / 680.39 kg
  • Platform Height: 43 ft / 13.11 m

Key Features

  • Larger platform and increased lift capacity
  • Optional one-touch leveling jacks for quicker setup
  • Maximum lift and lower time of 43 seconds gives you more time to get your work done
  • New twin-pump-powered 4WD for a higher level of performance over rough terrain
  • Equipped with a fuel-efficient Tier 4 engine
Power Source
Capacity - Fuel Tank 30 gal. / 113.56 L
Engine Type - Diesel DEUTZ T4F D2.9L4 48.8 hp
Engine Type - Dual Fuel GM Vortec 3000 MPR 82hp
General
Capacity - Hydraulic Reservoir 32 gal. / 121.13 L
Machine Weight 15300 lb / 6939.96 kg
Performance
Drive Speed - Platform Elevated 0.50 mph / 0.80 km/h
Drive Speed - Platform Lowered 4 mph / 6.44 km/h
Gradeability 45 %
Lift Time 40 sec.
Lower Time 43 sec.
Maximum Drive Height 43 ft / 13.11 m
Maximum Lift Height 43 ft / 13.11 m
Platform Capacity 1500 lb / 680.39 kg
Platform Capacity - Extension 500 lb / 226.80 kg
Turning Radius - Outside 19 ft 6 in. / 5.93 m
Dimensional Data
Ground Clearance 1 ft / 0.3 m
Machine Height 9 ft 6 in. / 2.89 m
Machine Height - Rails Folded 7 ft 2 in. / 2.19 m
Machine Length 12 ft 8 in. / 3.86 m
Machine Width 7 ft 10 in. / 2.39 m
Platform Dimension A 12 ft 6 in. / 3.81 m
Platform Dimension B 7 ft 2 in. / 2.18 m
Platform Extension Length 4 ft / 1.22 m
Platform Height 43 ft / 13.11 m
Platform Height - Lowered 5 ft 10 in. / 1.79 m
Platform Railing Height 3 ft 8 in. / 1.1 m
Tire Size 33 x 15.5 Superwide
Wheelbase 9 ft 8 in. / 2.95 m
Reach Specifications
Platform Height 43 ft / 13.11 m

JCB Hydraulic Excavators 8018 CTS

8018 CTS

If you're looking for the ultimate mini excavator, look no further than the JCB 8018 CTS. It boasts best-in-class performance, allied to incredible build quality, superlative strength and unbeatable ease of operation.

We've used the very latest manufacturing and design processes to create this highly advanced conventional tailswing machine. As such, it boasts everything from a potent engine to a strong dozer blade, durable steel bushes, an extending undercarriage, low weight and a new high-precision hydraulic valve block.

Weights
Operating Weight 4017lb (1822kg)
Working Performance
Maximum Dig Depth 10' 1" (3.075m)
Maximum Dump Height 9' 4" (2.846m)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics