Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Walker, Kansas

Are you looking for work-ready & reliable machinery to kick start a construction project in Walker ?

Whether you've been awarded a construction project already or are exploring potential tie-ups for heavy construction equipment rentals in Walker, let us tell you that we can put you in touch with the right vendors within a day or two!

Yes, we've onboard a large network of vendors with work-ready construction equipment. You can rent equipment on a daily, weekly or monthly basis, as you see fit. So, you need not spend a dime extra on equipment you acquire on a rental basis.

As soon as you call us at our toll free number or get in touch through the short contact form on the right, we will start working on finding the best vendor for you.

The process normally takes 6 to 48 hours to complete.

Equipment Rental Walker, Construction equipment rental Walker, Construction Walker, Heavy Equipment Rental Walker.

Unable to parse entered address. API response code: REQUEST_DENIED

If you own a construction company, run a warehouse or have a goods transport business in Shoshone, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.

But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.

But, finding reliable Excavator rentals in Shoshone isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Shoshone.

This is where HeavyRentals.Equipment can help.

Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Shoshone as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Shoshone against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.

As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Shoshone you wish to choose.

Komatsu Dozers D37EXi-23

D37EXi-23 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 91 HP 68 kW
(ISO 14396 89 HP 66 kW
ISO 9249 / SAE J1349 - Net 79 HP 59 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Steering System Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.

Minimum turning radius: 87" 2.2 m
As measured by track marks on the ground at pivot turn.
Undercarriage
Suspension Rigid track frame
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Tractor for inside mounted blade (PAT)
Number of track rollers (each side) 6
Number of carrier rollers (each side) 1
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 1.9" 47 mm
Shoe width (standard) 18" 460 mm
Ground contact area 3,180 in² 20516 cm²
Ground pressure
(with standard shoe)
5.93 psi 0.42 kgf/cm² / 40.9 kPa
Track gauge 5'2" 1570 mm
Length of track on ground 7'4" 2230 mm
Link pitch 6.1" 154 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 16.9 U.S. gal 64 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,387 lb 8340 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,922 lb 9490 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refill):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold and lower

Komatsu Dozers D37EX-23

D37EX-23 Crawler Dozer

Komatsu small dozers are great finish grading tractors for a lot of reasons but the most obvious is the super slant nose design. The super slant nose design moves the coolers and hydraulic fan to the rear and the operator forward to create a balance that makes fine grading with or without a grade control system a breeze. A fully hydrostatic drivetrain gives the operator incredibly quick and precise maneuverability. And new Power and Economy working modes allow the operator to adjust his machine's performance to his current job and save on fuel consumption as he's doing it. Like all Komatsu products, the D37EX-23 has the advanced hydraulics to make the addition of a grade control system seamless and turn it from a great grading tractor to an incredibly precise and fast fine grading system.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 91 HP 68 kW
(ISO 14396 89 HP 66 kW
ISO 9249 / SAE J1349 - Net 79 HP 59 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius* 79" 2.0 m
*As measured by track marks on the ground at pivot turn.
Undercarriage
Suspension Rigid track frame
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Unique seals minimize the entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with a grease gun.
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Tractor for inside mounted blade (PAT)
Number of track rollers (each side) 6
Number of carrier rollers (each side) 1
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 1.9" 47 mm
Shoe width (standard) 18" 460 mm
Ground contact area 2,778 in² 17920 cm²
Ground pressure
(with standard shoe)
6.39 psi 0.45 kgf/cm² / 44.1 kPa
Track gauge 5'2" 1570 mm
Length of track on ground 7'4" 2230 mm
Link pitch 6.1" 154 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 16.9 U.S. gal 64 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 16,314 lb 7400 kg
Operating weight: Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 18,695 lb 8480 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min / 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.0" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 4"
80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics