Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Coalfield, Tennessee

Do you have a construction project coming up in Coalfield ? In case you are new in business, have equipment at a far-off location or just understand the benefits of construction equipment rentals, we can be of great assistance!

Our vendors can have the construction equipment delivered at the jobsite within a day or two.You can also pick machines and tools from convenient locations in Coalfield if you are in a position to move them on your own.

Dial our toll free number or fill out the contact form (on the right) to start receiving calls from some of the most reliable vendors in the region.

If the need be, you can personally visit the premises of any of the vendors and personally inspect their heavy construction equipment inventory to ascertain if the machines and tools are clean, latest and well maintained! We always encourage our customers to do that.

Equipment Rental Coalfield, Construction equipment rental Coalfield, Construction Coalfield, Heavy Equipment Rental Coalfield.

John Deere Scraper Systems 9570RT
9570RT
Why walk when you can run? The New 9RT Series Tractors are built to defy convention. With more engine horsepower (470 - 570 engine hp) and efficient FT4 engine technology, these machines welcome a good challenge. Just when you think there isn't any room for more, we outfitted the 9RT's with the new CommandViewTM III cab. It delivers more space, comfort and convenience than before, with a few features you might not expect. A new and improved e18TM Transmission with Efficiency Manager also adds to the appeal by providing the smoothest shifting power shift in the market, with an additional automatic mode. Get ready run!

FEATURES & SPECS

  • Cummins QSX15
  • New and improved e18TM PowerShift Transmission
  • AirCushion Suspension System
  • New CommandViewTM III cab
Horsepower: 570 engine hp
Hydraulic Capacity: 115 U.S. gpm (435 L/min) standard
Drawbar Support: Available for long or short scraper drawbars

John Deere Scraper Systems 1812C
1812C
The 1812C Carry-All Scraper is a four-tire scraper that carries 18 cu yd of material and has a 12-ft cut width. This scraper works well for construction contractors bulk-hauling materials using 360-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 14 cu yd
Heaped capacity cubic yards 18 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 24 ft 10 in. 7569 mm
Width, ft, in. (mm) 13 ft 10 in. 4216 mm
Height, ft, in. (mm) 7 ft 6 in. 2286 mm
Bucket dimensions --
Length, ft, in. (mm) 7 ft 8 in. 2337 mm
Width, ft, in. (mm) 12 ft 0 in. 3658 mm
Height, ft, in. (mm) 3 ft 10 in. 1168 mm
WEIGHT
Approximate shipping weight, lb (kg) 18,950 lb 8595 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 28%
Wheels 72%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 20.5 X 25
Option 1 NA
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 360 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard, 3 piece blades
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Not Approved
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Factory Installed Only
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

John Deere Scraper Systems 9520R
9520R
Why walk when you can run? The New 9R Series Tractors are built to defy convention. With more engine horsepower (370 - 620 engine hp) and efficient FT4 engine technology, these machines welcome a good challenge. We've also added the new HydraCushionTM Suspension system on select models to help mitigate powerhop and road lope. Just when you think there isn't any room for more, we outfitted the 9R's with the new CommandViewTM III cab. It delivers more space, comfort and convenience than before, with a few features you might not expect. A new and improved e18TM Transmission with Efficiency Manager also adds to the appeal by providing the smoothest shifting power shift in the market, with an additional automatic mode. Get ready run!

FEATURES & SPECS

  • John Deere PowerTechTM 13.5L PSS
  • New and improved e18TM PowerShift Transmission
  • New HydraCushionTM Suspension option
  • New CommandViewTM III cab
Horsepower: 520 engine hp Up to 58 U.S. gpm (220 L/min)
Hydraulic Capacity: standard. Up to 115 U.S. gpm (435 L/min) optional.
Drawbar Support: Available for long or short scraper drawbars

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics