Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Collinwood, Tennessee

Do you have a construction project coming up in Collinwood ? In case you are new in business, have equipment at a far-off location or just understand the benefits of construction equipment rentals, we can be of great assistance!

Our vendors can have the construction equipment delivered at the jobsite within a day or two.You can also pick machines and tools from convenient locations in Collinwood if you are in a position to move them on your own.

Dial our toll free number or fill out the contact form (on the right) to start receiving calls from some of the most reliable vendors in the region.

If the need be, you can personally visit the premises of any of the vendors and personally inspect their heavy construction equipment inventory to ascertain if the machines and tools are clean, latest and well maintained! We always encourage our customers to do that.

Equipment Rental Collinwood, Construction equipment rental Collinwood, Construction Collinwood, Heavy Equipment Rental Collinwood.

Unable to parse entered address. API response code: REQUEST_DENIED

John Deere Wheel Loader 204K
The lowdown on high productivity.

Whether you use a 204K Compact Loader for shuttling seed, heaping hoppers, transporting bales, or any other ag application, you can count on nimble maneuvering and do-it-all flexibility. Just 2.45-m (7 ft. 11 in.) tall, their articulated steering delivers a tight turn radius for close quarters, and when the task includes rough terrain, the oscillating front loader frame reduces cab tilt for a comfortable ride. Learn more about these low-cost, low-profile 204K Compact Loader by contacting your dealer.

ENGINE
Emission Rating Interim Tier 4
Engine Make / Engine Model YANMAR / 4TNV98
Net Power, kW (hp) @ Rated rpm 44 (59) @ 2200
Displacement, L (cu in) 3.319 (202.5)
Net Peak Torque, N-m (lb-ft) 239 (176)
Calculated % Torque Rise --
ELECTRICAL
Voltage 12
Alternator amps 80
TRANSMISSION
Type Hydrostatic
Max. Travel Speed - fwd, kph (mph) 20 (12)
Max. Travel Speed - rev, kph (mph) 20 (12)
DIFFERENTIAL
Traction Device - Front / Rear F: 45 / R: 45
FINAL DRIVE
Front Axle Type Planetary - Outboard
Rear Axle Type Planetary - Outboard
SERVICE BRAKES
Service Brakes Type Wet Disc
Service brake location All Wheels
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Gear
Pump Flow, L/min (gpm) 70 (18)
System Pressure, kPa (psi) 23000 (3335)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 0.8 (1)
Bucket Capacity Max., cu m (cu yd) 1.1 (1.4)
Breakout Force, Std Bucket, kN (lb) 40.8 (9190)
Ride Control No
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 0.8 (1)
Tire Size Standard 365 / 70 R18
TIPPING LOAD
Straight, kg (lb) 3700 (8157)
Full Turn, kg (lb) 3280 (7231)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 3180 (10 ft 5 in)
Dump Clear @ 45 deg, mm (ft in) 2430 (8 ft )
Reach @ 7', mm (ft in) 1490 (4 ft 11 in)
Reach @ Full Height, mm (ft in) 920 (3 ft )
Wheelbase, mm (ft in) 2150 (7 ft 1 in)
Clearance Circle, mm (ft in) 8460 (27 ft 9 in)
Overall Length, mm (ft in) 5420 (17 ft 4 in)
Height to Top of Cab, mm (ft in) 2450 (7 ft 11 in)
Ground Clearance, mm (in) 318 (12.5)
CAPACITIES
Fuel Tank, L (gal) 50 (13.2)
Hydraulic Reservoir, L (gal) 90 (23.8)
WEIGHT
SAE Operating Weight, kg (lb) 5355 (11806)
Metric Ton Weight, kg (lb) 5.355 (11.806)

SkyTrak Telehandlers 10042

JLG SkyTrak Telehandlers 10042
Key Specs

  • Maximum Lift Capacity: 10000 lb / 4535.92 kg
  • Outriggers Up Max Lift Height: 42 ft 2 in. / 12.84 m
  • Maximum Reach: 26 ft 6 in. / 8.08 m
  • Maximum Lift Height: 42 ft 2 in. / 12.84 m

Key Features

  • Advanced hydraulics for precise load control and more horsepower to the wheels
  • Sealed bearings extend service intervals for lower maintenance costs
  • Axle-mounted outriggers allow frame leveling without changing stance
  • Stabil-Trak stability system for increased operator confidence
  • Variety of attachments for high versatility in handling jobsite challenges
Performance
Breakout Force 24000 lb / 10886.22 kg
Drawbar Pull 24000 lb / 10886.22 kg
Frame Leveling 10 Degrees
Outriggers Up Lift Capacity Full Height 6000 lb / 2721.55 kg
Outriggers Up Lift Capacity Full Reach 2000 lb / 907.18 kg
Load Center 2 ft / 0.61 m
Maximum Lift Capacity 10000 lb / 4535.92 kg
Outriggers Up Max Lift Height 42 ft 2 in. / 12.84 m
Outriggers Up Max Forward Reach 26 ft 6 in. / 8.08 m
Lift Capacity at Full Height 6000 lb / 2721.55 kg
Lift Capacity at Max Reach 6000 lb / 2721.55 kg
Maximum Reach 26 ft 6 in. / 8.08 m
Maximum Lift Height 42 ft 2 in. / 12.84 m
Outriggers or Stabilizers Yes
Outside Turning Radius 14 ft 2 in. / 4.32 m
Speed - Maximum Lift 18 sec.
Speed - Maximum Lower 16 sec.
Speed - Maximum Telescope In 17 sec.
Speed - Maximum Telescope Out 19 sec.
Speed - Maximum Travel 21 mph / 32.99 km/h
Dimensional Data
Ground Clearance 1 ft 6 in. / 0.46 m
Machine Height 8 ft 4 in. / 2.54 m
Machine Length 18 ft 9 in. / 5.72 m
Machine Width 8 ft 6 in. / 2.59 m
Tire Size 400/75-28
Track Width 7 ft / 2.13 m
Wheelbase 10 ft / 3.04 m
Power Source
Capacity - Fuel Tank 35 gal. / 132.49 L
Engine Horsepower 100 hp / 74.60 kW
Engine Manufacturer Cummins
Engine Model QSB3.3L
Maximum Engine RPM 2600 rpm
General
Axle-Front High Bias, Limited Slip
Axle-Rear Oscillating
Function Pump Type Load Sensing Piston
Hydraulic System Pressure 3100 psi / 217.10 Kg/cm2
Operating Vehicle Weight 26323 lb / 11939.91 kg
Service Brake Type Wet Multi-Disc
Transmission - Nr Forward Gears Standard 4
Transmission - Nr Reverse Gears 3
Transmission Type Powershift

Komatsu  Motor Grader Grader GD655-5
GD655-5
The GD655-5 has a unique dual mode automatic transmission. The operator can operate in direct drive mode for long pushes such as snow removal without ever having to declutch like all other graders. In the torque converter mode the operator has excellent low speed maneuverability and hydraulic control again, without having to declutch to prevent stalling the machine. Excavator style hydraulics, 900 left or right bank slope, two working modes and variable horsepower give the operator the tools he needs to do any job with precision and power.

Engine
Model Komatsu SAA6D107E-1*
Type Water-cooled,4-cycle,direct injection
Aspiration Turbocharged and air-to-air aftercooled
Number of cylinders 6
Bore 4.21" 107 mm
Stroke 4.88" 124 mm
Piston displacement 408 in3 6.69 ltr
Gross horsepower (Manual mode):
P-mode
Gear 1-3 @2000 rpm 183 HP 136 kW
Gear 4-6 @2000 rpm 203 HP 151 kW
Gear 7-8 @2100 rpm 221 HP 165 kW
E-mode
Gear 1-3 @2000 rpm 148 HP 110 kW
Gear 4-6 @2000 rpm 183 HP 136 kW
Gear 7-8 @2000 rpm 203 HP 151 kW
Net flywheel horsepower** (Manual mode):
P-mode
Gear 1-3 @2000 rpm 180 HP 134 kW
Gear 4-6 @2000 rpm 200 HP 149 kW
Gear 7-8 @2100 rpm 218 HP 163 kW
E-mode
Gear 1-3 @2000 rpm 145 HP 108 kW
Gear 4-6 @2000 rpm 180 HP 134 kW
Gear 7-8 @2000 rpm 200 HP 149 kW
Max. torque @1450 rpm 694 lb.ft. 941 Nm 96.0 kg•m
Torque rise 31 %
Fan speed Max. 1500 rpm
Air cleaner 2-stage, dry-type
Electrical 24 Volt with 90 Amp alternator
Battery 2, low maintenance plus, 12 Volt, 1146 CCA
* EPA Tier 3 and EU Stage 3A emissions certified
** Net flywheel HP output for standard SAE J1349 including air cleaner, alternator (not charging), water pump, lubricating oil, fuel pump, muffler and fan running at minimum speed.
Transmissions and Torque Converter
Full power shift transmission with integral free-wheeling stator torque converter and lockup.
Speeds (at rated engine speed)
Gear Forward Reverse
1st 2.1 mph 3.4 km/h 2.8 mph 4.5 km/h
2nd 3.1 mph 5.0 km/h 5.7 mph 9.2 km/h
3rd 4.3 mph 7.0 km/h 12.6 mph 20.3 km/h
4th 6.3 mph 10.2 km/h 25.0 mph 40.3 km/h
5th 9.6 mph 15.4 km/h -
6th 13.9 mph 22.3 km -
7th 19.0 mph 30.6 km/h -
8th 27.5 mph 44.3 km/h -
Front Axel
Type Solid bar construction welded steel sections
Ground clearance at pivot 2'0" 620 mm
Wheel lean angle, right or left 16°
Oscillation, total 32°
Rear Axle
Alloy steel, heat treated, full floating axle with lock/unlock differential
Tandem Drive
Oscillating welded box section 1'8" x 8" 520 mm x 202 mm
Side wall thickness:
Inner 0.87" 22 mm
Outer 0.75" 19 mm
Wheel axle spacing 5'0" 1525 mm
Tandem oscillation 11° forward, 13° reverse
Wheels, Front and Rear
Bearings Tapered roller
Tires 17.5R25
Tire rims (demountable) 13" one-piece rims
Steering
Hydraulic power steering providing stopped engine steering meeting SAE J53 and J1151.
Minimum turning radius 24'3" 7.4 m
Maximum steering range, right or left 49°
Articulation, right or left 25°
Brakes
Service brake Foot operated, sealed wet disc brakes, hydraulically actuated on four tandem wheels, 13691 cm2 / 2,122 in2 total braking surface
Parking brake Manually actuated, spring applied, hydraulically released caliper with transmission interlock
Frame
Front Frame Structure
Height 11.8" 300 mm
Width 11.8" 300 mm
Drawbar
A-shaped, U-section press formed and welded construction for maximum strength with a replaceable drawbar ball.
Drawbar frame 8.3" x 1" 210 x 25 mm
Circle
Single-piece rolled ring forging. Six circle support shoes with replaceable wear surface. Circle teeth hardened on front 180¢ª of circle.
Diameter (outside) 5'0" 1530 mm
Circle reversing control hydraulic rotation 360°
Moldboard
Hydraulic power shift fabricated from high carbon steel. Includes replaceable metal wear inserts, cutting edge and end bits. Cutting edge and end bits are hardened.
Dimensions 14' x 26" x 0.87" 4320 x 660 x 22 mm
Arc radius 1'1" 329 mm
Cutting edge 6" x 0.63" 152 x 16 mm
Blade Range
Circle center shift:
Right 1'11" 590 mm
Left 1'11" 590 mm
Moldboard side shift:
Right 2'8" 820 mm
Left 2'8" 820 mm
Maximum shoulder reach outside rear tires (frame straight)
Right 6'4" 1940 mm
Left 6'4" 1940 mm
Maximum lift above ground 1'7" 480 mm
Maximum cutting depth 2'0" 615 mm
Maximum blade angle, right or left 90°
Blade tip angle 40° forward 5° backward
Hydraulic System
Load-sensing closed center hydraulics with variable displacement piston pump. Short stroke/low effort direct acting control valves with preselected maximum flow setting to each function. Double acting anti-drift check valves on blade lift, tip, circle shift, articulation, and leaning wheels.
Output @ 2000 rpm 52.8 u.s.gal/min 200 ltr/min
Standby pressure 500 psi 3.4 MPa 35 kg/cm2
Maximum system pressure 3,000 psi 20.6 MPa 210 kg/cm2
Instrumentation
Electric monitoring system with diagnostics:
Gauges - Standard: articulation, engine coolant temperature, fuel level, speedometer, T/M shift indicator, engine tachometer torque converter oil temperature
Warning lights / Indicator - Standard: battery charge, brake oil pressure, blade float, brake oil pressure, inching temperature, directional indicator, engine oil pressure, hydraulic oil temperature, heater signal, lift arm lock, parking brake, differential lock, torque converter oil temperature, eco, P mode, fan reverse, rpm set, high beam, working lights
Optiona3 blade accumulator
Service Refill Capacities
Fuel tank 109.9 u.s. gal 416 ltr
Cooling system 6.6 u.s. gal 24.9 ltr
Crank case 6.1 u.s. gal 23.1 ltr
Transmission 11.9 u.s. gal 45 ltr
Final drive 4.5 u.s. gal 17 ltr
Tandem housing (each) 15.1 u.s. gal 57 lt
Hydraulic system 18.2 u.s. gal 69 ltr
Circle reverse housing 1.8 u.s. gal 7 ltr
Operating Weight (approximate)
Standard configuration without pushplate
Total 35,351 lb 16035 kg
On rear wheels 25,534 lb 11582 kg
On front wheels 9,817 lb 4453 kg
With rear mounted ripper and front push plate:
Total 39,505 lb 17916 kg
On rear wheels 27,944 lb 12673 kg
On front wheels 11,561 lb 5243 kg
With mid-mounted scarifier, without front pushplate:
Total 36,665 lb 16631 kg
On rear wheels 25,708 lb 11661 kg
On front wheels 10,957 lb 4970 kg
• Front pushplate weight 1075 kg 2,371 lb
• Operating weight based on the standard machine configuration with 17.5R25 tires, 14' moldboard, full fuel tank, coolant, lubricants, and operator

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics