Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Cumberland City, Tennessee

Do you have a construction project coming up in Cumberland City ? In case you are new in business, have equipment at a far-off location or just understand the benefits of construction equipment rentals, we can be of great assistance!

Our vendors can have the construction equipment delivered at the jobsite within a day or two.You can also pick machines and tools from convenient locations in Cumberland City if you are in a position to move them on your own.

Dial our toll free number or fill out the contact form (on the right) to start receiving calls from some of the most reliable vendors in the region.

If the need be, you can personally visit the premises of any of the vendors and personally inspect their heavy construction equipment inventory to ascertain if the machines and tools are clean, latest and well maintained! We always encourage our customers to do that.

Equipment Rental Cumberland City, Construction equipment rental Cumberland City, Construction Cumberland City, Heavy Equipment Rental Cumberland City.

JLG® Telehandler G12-55A

 

JLG® Telehandler G12-55A

Key Specs

  • Maximum Lift Capacity: 12000 lb / 5443.11 kg
  • Outriggers Up Max Lift Height:55 ft / 16.76 m
  • Maximum Reach: 42 ft 6 in. / 12.95 m
  • Maximum Lift Height: 55 ft / 16.76 m

Key Features

  • Roomier cab for added comfort and to reduce operator fatigue
  • All-wheel steering for easy maneuverability
  • Full range of attachments for versatility in handling jobsite challenges
  • Single joystick control for smooth operation of boom movements
  • Power shift transmission provides efficient control
PERFORMANCE
Breakout Force 27900 lb / 12655.23 kg
Drawbar Pull 24000 lb / 10886.22 kg
Frame Leveling 10 Degrees
Outriggers Up Lift Capacity Full Height 4000 lb / 1814.37 kg
Outriggers Up Lift Capacity Full Reach 500 lb / 226.80 kg
Load Center 2 ft / 0.61 m
Maximum Lift Capacity 12000 lb / 5443.11 kg
Outriggers Up Max Lift Height 55 ft / 16.76 m
Outriggers Up Max Forward Reach 42 ft / 12.8 m
Lift Capacity at Full Height 5000 lb / 2267.96 kg
Lift Capacity at Max Reach 3500 lb / 1587.57 kg
Maximum Reach 42 ft 6 in. / 12.95 m
Maximum Lift Height 55 ft / 16.76 m
Outriggers or Stabilizers Yes
Outside Turning Radius 14 ft 6 in. / 4.41 m
Speed - Maximum Lift 15 sec.
Speed - Maximum Lower 14 sec.
Speed - Maximum Telescope In 12 sec.
Speed - Maximum Telescope Out 16 sec.
Speed - Maximum Travel 20 mph / 32.19 km/h
dimensional data
Ground Clearance 1 ft 7 in. / 0.48 m
Machine Height 8 ft 6 in. / 2.59 m
Machine Length 20 ft / 6.1 m
Machine Width 8 ft 6 in. / 2.59 m
Tire Size 400/75-28
Track Width 7 ft 4 in. / 2.24 m
Wheelbase 12 ft / 3.66 m
power source
Capacity - Fuel Tank 38 gal. / 143.85 L
Engine Horsepower 130 hp / 96.98 kW
Engine Manufacturer Cummins
Engine Model QSB4.5L
Maximum Engine RPM 2500 rpm
General
Axle-Front High Bias, Limited Slip
Axle-Rear Oscillating
Function Pump Type Var Load Sensing Piston
Hydraulic System Pressure 3625 psi / 253.86 Kg/cm2
Operating Vehicle Weight 35860 lb / 16265.82 kg
Service Brake Type Wet Multi-Disc
Transmission - Nr Forward Gears Standard 4
Transmission - Nr Reverse Gears 3
Transmission Type Powershift

Komatsu Trucks 830E-1AC

830E-1AC Electric Drive Truck

A leader in the 240 ton class mining truck, the 830E-1AC is built on a tradition of excellence dating back to it's introduction as a DC drive truck in 1989. Customers experience the lowest cost per ton operations in the industry while utilizing the 830E-1AC as their prime material hauler. Powered by a Komatsu SDA16V160 engine, the General Electric drive system provides efficient transfer of the power to the ground while demonstrating low fuel consumption and excellent reliability. The dynamic retarding provides the greatest braking efficiency in the industry, utilizing advanced logic including retard speed control. The modern operators cab is fully ROPS/FOPS certified and designed for maximum operator comfort. With a host of options designed for mine specific needs, the 830E-1AC is the only 240 ton class truck you will ever need.

Engine
*Make and model Komatsu SDA16V160
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
*Rated brake power@ 1900 rpm 2,500 HP 1865 kW
**Flywheel power@ 1900 rpm 2,360 HP 1761 kW
Weight (wet) 21,182 lb 9608 kg
* Tier 2 emissions certified. Tier 1 emissions engine is optional outside of North America.
** Rated brake power is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump
***Flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent gross engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC current
Alternator G.E. GTA-41
Dual impeller in-line blower 9,000 cfm 255 m³/min
Control AC torque control system
Motorized wheels GEB25
Ratio 31.875:1
Speed (maximum) 40 mph 64 kph
* Wheel motor application Depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, tires (bias ply or radial)
Standard tire 40.00R57
*Optional tire 46/90R57
Standard five (5) piece rim 737 mm x 1488 mm x 152 mm rims 29'' x 57'' x 6'' rims
Typical tire weight 46,476 lbs 21081 kg
* Fitment of optional 46/90R57 tire shall increase nominal GVW rating to 392357 kg / 865,000 lbs
Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet - tensile strength steel (two-piece) 19 mm / 1379 mPa 0.75'' / 200,000 psi
Front sheet - tensile strength steel 12 mm / 1379 mPa 0.47'' / 200,000 psi
Side sheet - tensile strength steel 8 mm / 1379 mPa 0.31'' / 200,000 psi
Canopy sheet 5 mm / 690 mPa 0.19'' / 100,000 psi
Struck 153 yd³ 117 m³
Standard SAE heaped 2:1 193 yd³ 147 m³
Standard Komatsu body weight 61,000 lbs 27669 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2, (SAE J1040/ISO 3449) adjustable air suspension seat w/lumbar support and arm rests, passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted glass, power windows, Komatsu Payload Weighing System, 55,000 Btu/hr heater and defroster, 21,600 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box-sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material - tensile strength steel 70,000 psi 482.6 mPa
Casting material - tensile strength steel 90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.25'' 32 mm
Side plate thickness 0.62'' 16 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
System meets ISO 3450/1996
Service brakes: all-hydraulic actuated
Front Wheel speed disc.Three calipers on a 47.75" / 1213 mm O.D. disc.
Rear Dual disc armature speed. Two 25" / 635 mm O.D. discs per side.One caliper per disc.
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch-activated
Parking brakes Spring-applied, hydraulically released, with speed application protection.
Electric dynamic retarder (max.) 4000 hp 2983 kW
Suspension
HYDRAIR® II
Variable rate hydro-pneumatic with integral rebound control.
Max. front stroke 13.2'' 335 mm
Max. rear stroke 11.0'' 279 mm
Max. rear axle oscillation 10.3°
Cooling System
L&M radiator assembly with sight gauge. Deaeration-type top tank. Dual pass cooling.
Radiator frontal area. 67.2 ft² 6.24 m²
Service Capacities
Cooling system 150 U.S. gal 568 L
*Crankcase 74 U.S. gal 280 L
Hydraulic system 250 U.S. gal 946 L
Motor gear box 10 U.S. gal 38 L
Fuel 1200 U.S. gal 4542 L
* Includes lube oil filters
Hydraulic System
Cooling system 150 U.S. gal 568 L
*Crankcase 74 U.S. gal 280 L
Hydraulic system 250 U.S. gal 946 L
Motor gear box 10 U.S. gal 38 L
Fuel 1200 U.S. gal 4542 L
* Includes lube oil filters
Electrical System
4 x 8D 1450 CCA, 12 volt batteries, in series/parallel,deck-mounted with disconnect switch
Alternator 24-volt 140 amp
Lighting 24 volt
Cranking motors two/24 volt
Weight Distribution
Empty Vehicle Weight:(Wet, 100% fuel, no options, standard Komatsu body, standard tires)
Front axle 179,190 lb 81279 kg 50 %
Rear axle 182,810 lb 82921 kg 50 %
Total EVW 362,000 lb 164200 kg
Gross Vehicle Weight (Nominal):
Front axle 280,715 lb 127330 kg 33 %
Rear axle 569,936 lb 258519 kg 67 %
Total 850,650 lb 385848 kg
Nominal Payload* 488,650 lb 221648 kg
244 U.S. ton
*Nominal payload is as defined within Komatsu America Corporation’s payload policy documentation. In general, the nominal payload must be adjusted for the specific vehicle configuration and site application.
The figures above are provided for basic product description purposes. Please contact your Komatsu distributor for specific application requirements.

Komatsu Trucks HD1500-7
HD1500-7 Off-Highway Truck

The HD1500 has a capacity of 159 tons or 102 yd3. The fully automatic seven speed transmission with lock-up and skip-shift give the operator the speed and response he needs to meet production demands. On down hills, the operator has oil cooled multi-disc retarder and brakes to control his fully loaded truck. A tight turning radius and hydropneumatic suspension make the HD1500-7 very maneuverable in tight quarters and provide a cushioned ride for better load retention and a more comfortable ride.

Engine
Model Komatsu SDA12V160
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled
Number of cylinders 12
Bore x stroke 6.26" x 7.48" 159 mm x 190 mm
Piston displacement 2,746 in³ 45 ltr
Horsepower:
SAE J1995 / Gross 1,487 HP 1109 kW
ISO9249/SAE J1349 / Net 1,406 HP 1048 kW
Rated rpm 1,900 rpm
Fan drive type Mechanical
Maximum torque 5,041 lb ft 697 kg/m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system :
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and pre-cleaned, with dust indicator
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission: Full-automatic, planetary-shaft type
Speed range 7 speeds forward and 1 reverse
Lockup clutch Wet, multiple-disc clutch
Forward Torque converter drive 1st and 2nd gear with direct drive lock-up in 1st through 7th
Reverse Torque converter drive
Shift control Electronic shift control with automatic clutch modulation in all gears
Maximum travel speed 36 mph 58 km/h
Axles
Rear Axle Full-floating
Final drive type Planetary gear
Ratios:
Differential 2.647
Planetary 7.235
Suspension System
Variable rate, hydropneumatic with integral rebound control.
Maximum front stroke 14.76'' 375 mm
Maximum rear stroke 4.17" 106 mm
Rear axle oscillation +/-9.2°
Steering system
Type Fully hydraulic power steering with two double-acting cylinders
Supplementary steering Accumulator assist
Minimum turning radius 40' 12.2 m
Steering angle (left or right) 41°
Cab
Integral 4-post ROPS/FOPS cab structure (meets SAEJ 1040 Apr 88)
Main Frame
Type Box-sectioned structure; Integral front bumper
Brakes
Brakes meet ISO 3450 standard.
Service brakes:
Front Fully hydraulic control, oil-cooled multiple-disc type
Rear Fully hydraulic control, oil-cooled multiple-disc type
Parking brake Spring applied, oil-released, 3 caliper dry disc mounted on input yoke to differential
Retarder Oil-cooled, multiple-disc front and rear brakes act as retarder
Secondary brake Manual - push button operated.
Automatically applied prior to hydraulic system pressure dropping below established level.
Brake surface: 24,668 in² 159148 cm³
Body
Capacity:
Struck 71 yd³ 54 m³
Heaped (2:1 ,SAE) 102 yd³ 78 m³
Nominal payload 158.9 U.S. tons 144.1 metric tons
Material 400 Brinell hardness high tensile strength steel (front, sides, and bottom)
Structure Flat floor configuration
Material thickness:
Bottom 0.75" 19 mm
Front 0.47" 12 mm
Sides 0.35" 9 mm
Target area: (inside length x width) 25'2"x 18'9" 7670 mm x 5705 mm
Dumping angle 45°
Height at full dump 37'6" 11440 mm
Heating Exhaust heating
HyDRaulic System
Hoist cylinder Two, 3-stage telescopic type
Relief pressure 2,750 psi 19.0 MPa 193.4 kg/cm²
Hoist time
Raise 15 sec
Lower 15 sec
Weight (approximate)
Empty weight 232,144 lb 105300 kg
Max. gross vehicle weight: 550,000 lb 249478 kg
Not to exceed max. gross vehicle weight, including options, fuel and payload.
Empty weight is with 100% fuel and operator.
Weight distribution:
Empty:
Front axle 48.6%
Rear axle 51.4%
Loaded:
Front axle 32.8%
Rear axles 67.2%
tires
Standard Tires 33.00 R51
Service Refill Capacities
Fuel tank 560 U.S. gal 2120 ltr
Engine oil 51 U.S. Gal 193 ltr
Hydraulic system 238 U.S. gal 900 ltr
Differentials 78 U.S. gal 297 ltr
Final drives (total) 63.5 U.S. gal 240 ltr
Transmission 40.5 U.S. gal 153 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics