Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Duck River, Tennessee

Do you have a construction project coming up in Duck River ? In case you are new in business, have equipment at a far-off location or just understand the benefits of construction equipment rentals, we can be of great assistance!

Our vendors can have the construction equipment delivered at the jobsite within a day or two.You can also pick machines and tools from convenient locations in Duck River if you are in a position to move them on your own.

Dial our toll free number or fill out the contact form (on the right) to start receiving calls from some of the most reliable vendors in the region.

If the need be, you can personally visit the premises of any of the vendors and personally inspect their heavy construction equipment inventory to ascertain if the machines and tools are clean, latest and well maintained! We always encourage our customers to do that.

Equipment Rental Duck River, Construction equipment rental Duck River, Construction Duck River, Heavy Equipment Rental Duck River.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

New Holland Compact Excavators E55BX

Compact Excavators E55Bx

BOOST YOUR PRODUCTIVITY, FUEL SAVINGS AND COMFORT.
The versatile new E55Bx compact excavator not only allows you to excavate, grade and backfill with one machine, it allows you to save fuel and time while doing it. The E55Bx features a new fuel-saving mode that reduces fuel consumption by 20% compared to high-idle mode. You position the throttle to one of three positions—low, “S” for fuel-saving, and “H” for high idle.

Engine
Model 4TNV88 BXPYBD
Displacement, cu in (l) 133.5 (2.2)
Horsepower SAE NET, hp (kW) @ rpm 37.9 (28.3) @ 2400 rpm
Dimensions, FT (M)
Arm length 5’ 6.5” (1.69)
Boom length 9’ 6” (2.89)
Overall length 18’ (5.5)
Overall width (collapsed) -
Overall width (expanded) 6’ 5” (1.96)
Overall height (to top of canopy) 8’ 3” (2.53)
Base machine length 9' 7" (2.92)
Ground clearance of rear end 2’ 0.5” (0.625)
Center distance of tumblers 6’ 6” (2.0)
Overall length of crawler 8’ 2” (2.5)
Track gauge (collapsed) -
Track gauge (expanded) 5' 1" (1.56)
Width of crawler shoe (rubber) 15.7” (400)
Ground clearance of undercarriage 12” (0.32)
Base machine weight, lb (kg) 12,295 (5130)
Base machine weight with bucket, lb (kg) -
Working weight, lb (kg) 11,309 lbs (5130 kg)
Travel speed (turtle), mph (km/h) 1.4 (2.2)
Travel speed (rabbit), mph (km/h) 2.5 (4.0)
Drawbar pull force, lb (kN) 12,342 (54.9)
Arm breakout force, SAE lbf (kN) 5,328 (23.7)
Arm breakout force, ISO lbf (kN) -
Bucket breakout force, SAE lbf (kN) 6,992 (31.1)
Bucket breakout force, ISO lbf (kN) -
Max digging reach 20’ 5” (6.24)
Max digging reach at ground level 20’ (6.10)
Max digging depth 12’ 9” (3.90)
Max digging height 19’ 5” (5.93)
Max dumping clearance 14' 3" (4.35)
Min dumping clearance 5' 2" (1.58)
Max vertical wall digging depth 10’ 3” (3.14)
Min front swing radius 7' 4" (2.25)
Height at min front swing radius 14' 8" (4.48)
Horizontal digging stroke - ground level 9' 10" (3.00)
Ground pressure, psi (kPa) 4.19 (28.9)

Komatsu Dozer D155AX-8
D155AX-8
The new Tier 4 Final D155AX-8 dozer incorporates well proven Komatsu engine emissions technology that does not interfere with daily operation. Class leading engine horsepower, large capacity Sigmadozer blade and automatic lockup torque converter efficiently move massive amounts of material while using less fuel than prior model. The operator cab is loaded with features to help maintain operator comfort during the work day.

Engine
Model Komatsu SAA6D140E-7*
Type 4-cycle, water-cooled, direct injection
Aspiration 100 in³ Komatsu Variable Geometry Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 140 mm x 165 mm 5.51" x 6.50"
Piston displacement 15.24 ltr 930 in³
Governor Mid-range, electronic
Horsepower :
SAE J1995 - Gross 268 kW 360 HP
ISO 9249 / SAE J1349* - Net 264 kW 354 HP
Rated rpm 1900 rpm
Fan drive type Hydraulic
Lubrication system :
Method Gear pump, force lubrication
Filter Full-flow
*Net horsepower at the maximum speed of radiator cooling fan: 239 kW 320 HP
**EPA Tier 4 Final emissions certified
TORQFLOW Transmission
Komatsu's automatic TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter with lockup clutch, and a planetary gear, multipledisc clutch transmission which is hydraulically actuated and force-lubricated for optimum heat dissipation. Equipped with gearshift lock lever and neutral safety switch.
Travel speed:
1st Gear forward 3.8 km/h 2.4 mph
1st Gear reverse 4.6 km/h 2.9 mph
2nd Gear forward 5.6 km/h 3.5 mph
2nd Gear reverse 6.8 km/h 4.2 mph
3rd L Gear forward 7.5 km/h 4.7 mph
3rd L Gear reverse 9.2 km/h 5.7 mph
3rd Gear forward 11.6 km/h 7.2 mph
3rd Gear reverse 14.0 km/h 8.7 mph
Final Drive
Double-reduction, spur and planetary final drives increase tractive effort. Segmented sprockets are bolt-on for easy in-the-field replacement.
Steering System
PCCS lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to the left to make a left turn. Tilt it to the right for a right turn.

Hydrostatic steering system (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gearshift lock lever also applies parking brakes.

Minimum turning radius 2.14 m 7'0"
Undercarriage
Suspension: Oscillation-type with equalizer bar and forward mounted pivot shafts

Track roller frame: Monocoque, high-tensilestrength steel construction

K-Bogie undercarriage
Lubricated track rollers are resiliently mounted the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.

Track shoes
Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.

Number of shoes (each side) 42
Grouser height 80 mm 3.1"
Shoe width (standard/maximum) 24" / 28" 610 mm / 710 mm
Ground contact area 39955 cm² 6,193 in²
Ground pressure (tractor only) 80.3 kPa / 0.82 kg/cm² 11.6 psi
Service Refill Capacities
Fuel tank 625 ltr 165 U.S. gal
Coolant 104 ltr 27.5 U.S. gal
Engine oil 37 ltr 9.8 U.S. gal
Damper 1.5 ltr 0.4 U.S. gal
Transmission, bevel gear, and steering system 90 ltr 23.8 U.S. gal
Final drive (each side) 31 ltr 8.2 U.S. gal
DEF tank 39 ltr 10.3 U.S. gal
Hydraulic oil capacity 95 ltr 25.1 U.S. gal
Operating Weight
Tractor weight
Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment (including ROPS cab).
632700 kg 72,100 lb
Operating weight
Including strengthened SIGMADOZER, giant ripper, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
40500 kg 89,300 lb
Ground pressure 99.5 kPa / 1.01 kg/cm² 14.4 psi
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control unit:
All spool control valves externally mounted beside the hydraulic tank.

Variable piston pump with capacity (discharge flow) of 325 L/min 85.9 U.S. gal for steering and 180 L/min 47.6 U.S. gal for implement at rated engine rpm.

Relief valve setting
. . . for implement 27.5 MPa 280 kg/cm² 3,980 psi
. . . for steering 38.2 MPa 390 kg/cm² 5,550 psi

Control valves:
Spool control valve for SIGMADOZER®, Semi-U tilt dozer and Full-U
Positions: Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
Positions: Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders Double-acting, piston
Number of cylinders Bore Bore
Blade Lift / 2 110 mm 4.33"
Blade Tilt (Dual tilt) / 2 160 mm 6.30"
Blade Tilt (Single Tilt) / 1 160 mm 6.30"
Ripper Lift 180 mm 7.09"
Ripper Tilt / 1 200 mm 7.87"
Hydraulic oil capacity (refill):
SIGMADOZER 95 ltr 25.1 U.S. gal
Semi-U dozer 95 ltr 25.1 U.S. gal
Full-U dozer 95 ltr 25.1 U.S. gal
Ripper equipment (additional volume):
Multi-shank ripper 37 ltr 9.8 U.S. gal
Giant ripper 37 ltr 9.8 U.S. gal

New Holland Compact Excavators E18B

New Holland Compact Excavators E18B
PACKS MORE POWER PER SQUARE FOOT. THAT'S NEW HOLLAND SMART.
New Holland compact excavators deliver powerful performance, including leading bucket breakout force, maximum swing torque, excellent dig depth, superior drawbar pull force. And they fit this performance into a maneuverable compact package.

Engine
model L3E-W231KBS
Displacement, cu in (l) 58.1 (952)
Displacement, in³ (L) 58.1 (952)
Horsepower SAE NET, hp (kW) @ rpm 15.2@2,200 (11.3 @ 2,200)
Dimensions,FT(M)
-
Arm length 3'3" (0.98)
Boom length 5'9" (1.75)
Overall length 11'3" (3.42)
Overall width (collapsed) 3'3" (0.99)
Overall width (expanded) 4'4" (1.32)
Overall height (to top of canopy) 7'6" (2.35)
Base machine length 6'2" (1.89)
Ground clearance of rear end 1'6" (0.45)
Center distance of tumblers 4'0" (1.21)
Overall length of crawler 5'1" (1.56)
Track gauge (collapsed)
Bucket, ft/in (m)
2'6" (0.76)
Track gauge (expanded) 3'7" (1.09)
Width of crawler shoe (rubber) 0'9" (0.23)
Ground clearance of undercarriage 0'7" (0.18)
Base machine weight, lb (kg) -
Base machine weight with bucket, lb (kg) 3,638 (1,650)
Working weight, lb (kg) -
Travel speed (turtle), mph (km/h) 1.2 (2.0)
Travel speed (rabbit), mph (km/h) 2.5 (4.0)
Drawbar pull force, lb (kN) 4,474 (19.9)
Arm breakout force, SAE lbf (kN) 2,158 (9.6)
Arm breakout force, ISO lbf (kN) 2,248 (10.0)
Bucket breakout force, SAE lbf (kN) 2,900 (12.89)
Bucket breakout force, ISO lbf (kN) 3,417 (15.2)
Max digging reach 12'9" (0.98)
Max digging reach at ground level 12'5" (3.89)
Max digging depth 7'1" (2.15)
Max digging height 12'1" (3.68)
Max dumping clearance 8'8" (2.65)
Min dumping clearance 3'3" (1.00)
Max vertical wall digging depth 5'5" (1.66)
Min front swing radius 5'1" (1.56)
Height at min front swing radius 9'0" (2.75)
Horizontal digging stroke - ground level 5'7" (1.70)
Ground pressure, psi (kPa) 3.99 (27.5)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics