Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Gatlinburg, Tennessee

Do you have a construction project coming up in Gatlinburg ? In case you are new in business, have equipment at a far-off location or just understand the benefits of construction equipment rentals, we can be of great assistance!

Our vendors can have the construction equipment delivered at the jobsite within a day or two.You can also pick machines and tools from convenient locations in Gatlinburg if you are in a position to move them on your own.

Dial our toll free number or fill out the contact form (on the right) to start receiving calls from some of the most reliable vendors in the region.

If the need be, you can personally visit the premises of any of the vendors and personally inspect their heavy construction equipment inventory to ascertain if the machines and tools are clean, latest and well maintained! We always encourage our customers to do that.

Equipment Rental Gatlinburg, Construction equipment rental Gatlinburg, Construction Gatlinburg, Heavy Equipment Rental Gatlinburg.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Dozer D275AX-5
D275AX-5
The pushing power and production of the D275AX-5 comes from the 452 horsepower its Komastu engine produces and the lock-up torque converter. Other features such as hydrostatic steering and K-bogie system give the D275AX-5 the maneuverability to keep up with fast scraper pushing as well as tough ripping. To make the D275AX-5 even more productive, the unique Sigma dozer blade can be mounted to produce 15% more than a conventional blade.

Engine
Model Komatsu SAA6D140E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed, electronic
Horsepower :
SAE J1995 - Gross 452 HP 337 kW
ISO 9249 / SAE J1349 - Net 449 HP 335 kW
Hydraulic fan at maximum speed - Net 410 HP 306 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically-actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear Forward Reverse
1st 2.2 mph / 3.6 km/h 2.9 mph / 4.7 km/h
2nd 4.2 mph / 6.7 km/h 5.4 mph / 8.7 km/h
3rd 7.0 mph / 11.2 km/h 9.3 mph / 14.9 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket rims are bolt-on for easy replacement.
Steering System
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to the left to make a left turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius 12'10 3.9 m
Undercarriage
K-Bogie undercarriage
Lubricated track rollers are resiliently mounted on the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.Track shoes
Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Cylindrical, high-tensile-strength steel construction
Rollers and idlers Lubricated track rollers
K-Bogie undercarriage Lubricated track rollers are resiliently mounted to the roller frame with a series of K-Bogies whose oscillating motion is cushioned by rubber pads.
Extreme service track shoes Lubricated tracks. Unique seals help prevent entry of foreign abrasive material into pin-to-bushing clearances to provide extended service life. Track tension is easily adjusted with a grease gun.
Number of shoes (each side) 39
Grouser height:
Single grouser 3.5'' 88 mm
Shoe width (standard) 24'' 610 mm
Ground contact area 6,580 in² 42456 cm²
Ground pressure (tractor only) 12.7 psi 87.3 kPa / 0.89 kg/cm²
No. of track rollers 7
No. of carrier rollers 2
Extreme service shoes 24" 610 mm
Additional weight 0 lb 0 kg
Ground contact area 6,580 in² 42456 cm²
SIGMADOZERTM Strengthened Dual tilt Ground pressure** 17.2 psi 119 kPa / 1.21 kg/cm²
Semi-U tilt dozer Ground pressure** 16.6 psi 115 kPa / 1.17 kg/cm²
Extreme service shoes 28'' 710 mm
Additional weight 1,260 lb 570 kg
Ground contact area 7,659 in² 49416 cm²
SIGMADOZERTM Strengthened Dual tilt Ground pressure** 15.0 psi 103 kPa / 1.05 kg/cm²
Semi-U tilt dozer Ground pressure** 14.5 psi 100 kPa / 1.02 kg/cm²
Extreme service shoes 30'' 760 mm
Additional weight 1,870 lb 850 kg
Ground contact area 8,199 in² 52896 cm²
SIGMADOZERTM Strengthened Dual tilt Ground pressure** 14.1 psi 97 kPa / 0.99 kg/cm²
Semi-U tilt dozer Ground pressure** 13.7 psi 94 kPa / 0.96 kg/cm²
** Ground pressure based on tractor, cab, ROPS, operator, giant ripper, standard equipment, and shoe and blade shown in the chart.
Coolant and Lubricant Capacity (refill)
Fuel tank 222 U.S. gal 840 ltr
Coolant 26.4 U.S. ga 100 ltr
Engine 13.7 U.S. gal 52.0 ltr
Torque converter, transmission, bevel gear, and steering system 23.8 U.S. gal 90 ltr
Final drive (each side) 10.6 U.S. gal 40 ltr
Operating Weight
Tractor weight - Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 83,070 lb 37680 kg
Operating weight - Including Strengthened Dual tilt SIGMADOZERTM, giant ripper, steel cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 113,600 lb 51530 kg
Ground pressure 17.2 psi 119 kPa / 1.21 kg/cm²
Hydraulic System
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control units: All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 230 ltr/min / 60.8 U.S. gal/min at rated engine rpm.
Relief valve setting 3,980 psi 27.5 MPa / 280 kg/cm²
Control valves: Spool control valves for SIGMADOZERTM, Semi-U tilt and Full-U tilt dozer
Positions:
Blade lift Raise, hold, lower, and float.
Blade tilt Right, hold, and left.
Note: Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
Positions:
Ripper lift Raise, hold, and lower.
Ripper tilt Increase, hold, and decrease.
Hydraulic cylinders Double-acting, piston.
Hydraulic cylinders/ Number of cylinders: Bore Bore
Blade lift / 2 4.72'' 120 mm
Blade tilt / 1(Single tilt), 2(Dual tilt) 7.09'' 180 mm
Ripper lift / 2 7.09'' 180 mm
Ripper tilt / 2 6.30'' 160 mm
Hydraulic oil capacity (refill):
SIGMADOZERTM, Semi-U dozer, or U dozer 34.3 U.S. gal 130 ltr
Ripper equipment (additional volume):
Giant ripper 10.0 U.S. gal 38 ltr
Multi-shank ripper 10.0 U.S. gal 38 ltr

When selecting a Scissor Lift Rental unit in Kamuela, there is a multitude of factors that need attention. Just knowing the weight of the objects to be carried by the forklift is not enough. You must also determine the lift height, calculate the required turning radius, and also pay attention to the benefits of renting over purchasing.

But as simple as these things may sound, the process is complicated. Many managers may have to rely upon opinions given by forklift operators. Alternately, you can seek advice from experts at HeavyRentals.Equipment. We have an experienced team on board who can match you against the best Scissor Lift Rental companies in Kamuela. They can give you an accurate idea of the capacity of the different brands and their machines.

We make it more convenient for our clients to get access to reliable Scissor Lift Rental in Kamuela. We do this in two simple ways - depending upon your requirement, we can ask some pre-screened vendors in your area to get in touch with you, or we can provide you with their contact details, and help you establish direct contact with them. You choose!

We have a network of vendors with presence in more than 5,000 US locations. So, irrespective of how varied your forklift requirements are or where you are located, we may be able to help you out.

When you hire forklift for rental from one of our dealers, you can be rest assured that it follows all safety standards, and has been thoroughly inspected. Our vendors also offer a pick-drop-service for forklifts.

The right forklift can greatly enhance your efficiency and a wrong decision can be a waste of time and money. Don't take that chance and call our experts right away. We will offer you the best-suited advice for your business. With our help, you will be able to choose the best Scissor Lift Rental company in Kamuela in no time.

Komatsu Dozer D275AX-5WH
D275AX-5WH
The D275AX-5WH is a dozer specially equipped to fill the requirements of the sanitary landfill market. Guarding like fore and aft striker bars, belly pan with electric winch, chassis seal package and seal guards on the final drives, pivot shafts and idlers provide the protection needed in the severe landfill environment. Hydrostatic steering gives the D275AX-5SL the maneuverability required on a landfill and the lock-up torque converter provides the pushing power needed while still saving fuel.

Specification
Net Horsepower 410 HP 306 kw
Operating weight (Approx.) 116,528 lb** 52856 kg**
Engine Model Komatsu SAA6D140E-5
Rated Engine RPM 2000
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Track rollers (each side) 7
Carrier rollers (each side) 2
Width of standard track shoe 24" 610 mm
Length of track on ground 2000 rpm
Fan drive type 11'5" 3480 mm
Ground contact area (with standard shoe) 6,580 in² 42456 cm²
Track gauge 7'5" 2260 mm
** with Full-U Blade
Note: Operating weight includes blade indicated, landfill counterweight, steel cab, ROPS, operator, standard equipment, landfill package, rated capacity of lubricant, coolant, and full fuel tank.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics