Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Cameron, Louisiana

The days when only large scale companies could execute construction projects are long gone now. Today, the availability of heavy construction equipment rentals in Cameron and elsewhere have ensured that small companies do not have to depend on the availability of necessary capital to buy expensive machinery such as forklifts, concrete material handling equipment, dozers, excavators, etc.

But, finding the right vendor without having to spend several days short-listing and interviewing potential construction equipment suppliers is nothing short of a challenge for new players in the industry. This is where we can help.

We have a huge network of companies having inventories of all types of ready-to-rent construction equipment in Cameron.

Getting access to this network of some of the most reputed suppliers is easy. Dial our toll free number today or fill out the short contact form on the right.

The vendors will contact you within hours.

Equipment Rental Cameron, Construction equipment rental Cameron, Construction Cameron, Heavy Equipment Rental Cameron.

Komatsu Wheel Loaders WA1200-6
WA1200-6 Wheel Loader

26.2 yd³. 1765 hp. Incredible numbers for Komatsu's largest, most productive wheel loader, the WA1200-6. From the low vibration cab the operator uses his advanced joystick control and modulated clutch drive system to maneuver in tight areas to load trucks up to 320 ton capacity. High stability and breakout force give the operator the confidence he needs to keep up with the production demands of today's mines.

Engine
Model Komatsu SDA16V160E-2
Type Water-cooled, 4-cycle
Aspiration Turbocharged and aftercooled
Number of cylinders 16
Bore x stroke 6.26'' x 7.48'' 159 mm x 190 mm
Piston displacement 3,661 in³ 60 ltr
Governor Electronic fuel control
Flywheel horsepower
SAE J1995 - Gross 1892 HP 1411 kW
ISO 9249/SAE J1349 - Net 1765 HP 1316 kW 1765 hP
Rated rpm 1800 rpm
Fan drive method for radiator cooling Mechanical
Fuel system Modular common rail system direct injection
Lubrication system
Method Screw pump, forced lubrication
Filter Full-flow
Air cleaner Dry-type with double elements and automatic dust evacuation with dust indicator on monitor
Transmission
Torque converter - Type 3-element, single-stage, single-phase
Transmission - Type Full power shift, planetary gear with modulated clutch
Travel Speed (Measured with 60/80 R57 tires):
1st Forward 3.8 mph 6.1 km/h
1st Reverse 3.9 mph 6.3 km/h
2nd Forward 6.9 mph 11.1 km/h
2nd Reverse 7.1 mph 11.4 km/h
3rd Forward 11.6 mph 18.7 km/h
3rd Reverse 12.0 mph 19.3 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, full-floating
Rear Center-pin support, full-floating, 16˚ total oscillation
Reduction gear Spiral bevel gear
Differential gear Straight bevel gear
Final reduction gear Planetary gear, double reduction, oil bath
Brakes
Service brakes Hydraulically actuated, wet, multi-disc brakes actuated on four wheels.
Parking brake Wet, multi-disc, hydraulically-released, spring applied in the transmission.
Secondary brake Parking brake is commonly used
Steering System
Type Articulated, fully-hydraulic power steering
Steering angle 40° each direction
Turning radius outside corner of bucket and teeth 47'0" 14330 mm
Hydraulic System
14330 mm Rated capacity (discharge flow) @1800 engine rpm
Loader pump 269 gal/min 1018 ltr/min
Steering pump 167 gal/min 633 ltr/min
Switch pump 167 gal/min 633 ltr/min
Relief valve setting 4,550 psi 31.4 MPa 320 kg/cm²
Control valves A double spool closed-center hydraulic valve and a steering valve combined with a demand valve to provide optimum flow.
Hydraulic cylinders/Number of cylinders Bore x stroke: Bore x stroke:
Boom/2 14.2''x 72.2'' 360 mm x 1835 mm
Bucket/2 11.8''x 38.8" 300 mm x 985 mm
Steering/2 8.9''x 26.0'' 225 mm x 660 mm
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 14.8 sec
Dump 3.2 sec
Lower (empty) 5.3 sec
OPS FOPS Level 2 Cab
The cab is mounted on viscous damping mounts and is well insulated.
Service Refill Capacities
Cooling system 132 U.S. gal 500 ltr
Fuel tank 1,347 U.S. gal 5100 ltr
Engine 74 U.S. gal 280 ltr
Hydraulic system 343 U.S. gal 1300 ltr
Differential, final drive (each axle) 177 U.S. gal 670 ltr
Torque converter and transmission 92 U.S. gal 350 ltr
Brake oil 20 U.S. gal 75 ltr
Brake cooling 77 U.S. gal 290 ltr
Tires
Select proper tires based on job requirements. 500 ltr
Standard rim size 47.00-57/5.0
Standard tire size 60/80 R57

Komatsu Wheel Loaders WD600-6
WD600-6 Wheel Dozer

High productivity is the story of the WD600-6 wheeled dozer. The operator has two engine power modes, load sensing hydraulics and a modulated clutch system to harness the 527 horsepower to maximize production when moving mass quantities of soil, coal, chips, slurry or whatever gets in the way.

Engine
Model Komatsu SAA6D170E-5*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAEJ1995 - Gross 530 HP 396 kW
ISO 9249 / SAEJ1349 - Net 527 HP 393 kW
Hydraulic fan at maximum speed - Net 502 HP 374 kW
Rated rpm 1800 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
EPA Tier 3 and EU stage 3A emissions certified.
Transmission
Torque converter:
Type 3-element, single-stage, double-phase
Transmission:
Type Full-powershift, planetary type
Travel speed Measured with 35/65-33 tires
Speed: Forward
(Lock-up clutch ON)
Reverse
1st 4.2 mph
6.7 km/h
4.5 mph
7.3 km/h
2nd 7.3 mph
11.7 km/h(7.7 mph
12.4 km/h)
8.0mph
12.8 km/h
3rd 12.6 mph
20.3 km/h(13.5 mph
21.7 km/h)
13.7 mph
22.0 km/h
4th 20.5 mph
33.0 km/h(23.4 mph
37.7 km/h)
22.4 mph
36.0 km/h
Axles and Final Drives
Drive system Four-wheel drive.
Front Fixed, full-floating.
Rear Center-pin support, full-floating, 26° total oscillation.
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 43° each direction.
Minimum turning radius at the center of outside tire 23'3" 7075 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 43.1 U.S. gal/min 163 ltr/min
Relief valve setting 4,980 psi 34.3 MPa
350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 5.1" x 20" 130 mm x 510 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 47.6 + 47.6 U.S. gal/min 180 + 180 ltr/min
Relief valve setting 3,560 psi 24.5 MPa 250 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Blade lift - 1 6.3" x 42.5" 160 mm x 1080 mm
Tilt and pitch - 2 7.0" x 9.3" 180 mm x 237 mm
Control valve 3-spool type
Control positions:
Blade lift Raise, hold, lower, and float
Tilt and pitch Tilt-left, tilt-right, hold, pitch forward and back
Hydraulic cycle time
Raise 2.0 sec
Lower 1.3 sec
Tilt (left / right) 0.8 / 1.1 sec
Pitch (front / rear)mage 2.1 / 1.6 sec
Service Refill Capacities
Cooling system 38.8 U.S. gal 147 ltr
Fuel tank 189.7 U.S. gal 718 ltr
Engine 22.7 U.S. gal 86 ltr
Hydraulic system 117.0 U.S. gal 443 ltr
Axle:
Front 41.0 U.S. gal 155 ltr
Rear 41.0 U.S. gal 155 ltr
Torque converter and transmission 21.9 U.S. gal 83 ltr

Komatsu Trucks HD325-7
HD325-7 Off-Highway Truck

The HD325-7 is a 40 ton capacity workhorse. Very maneuverable, the MacPherson front suspension give the HD325-7 a turning radius tighter than other trucks in its class. With two working modes the operator can most effectively take advantage of the fully automatic seven speed transmission with lock-up feature. A hydropneumatic suspension gives the operator a comfortable ride while maintaining more material in the bed for more production.

Engine
Model KOMATSU SAA6D140E-5
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, air-to-air after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.5" x 6.5" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Horsepower:
SAEJ1995 - Gross 518 HP 386 kW
ISO 9249 / SAEJ1349 - Net 498 HP 371 kW
Rated rpm 2,000 rpm
Fan drive type Mechanical
Maximum torque 1,600 lb•ft 221 kg-m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system : Full-flow type
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner, plus dust indicator
EPA Tier 3 and EU Stage 3A emission certified.
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission: Full-automatic, planetary type
Speed range 7 speeds forward and 1 reverse
Lockup clutch Wet, single-disk clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive
Shift control Electronic shift control with automatic clutch modulation in all gears
Maximum travel speed 43.5 mph 70 km/h
Axles
Rear axle Full-floating
Final drive Planetary gear
Ratios:
Differential 3.125
Planetary 4.737
Suspension System
Type Fully hydraulic power steering with two double-acting cylinder
Supplementary steering Manual control (meets ISO 5010, SAE J1511 and SAE J53)
Auxiliary steering SAE automatic
Minimum turning radius 23'7'' 7.2 m
Maximum steering angle 43°
Cab
Dimensions comply with ISO 3471 and SAE J1040-1988c ROPS (Roll-Over Protective Structure) standards.
Main Frame
Type Box-sectioned structure
Brakes
Brakes meet ISO 3450 and SAE 1473 standards
Service brakes:
Front Full-hydraulic control, caliper disc type
Rear full-hydraulic, oil-cooled, multiple-disc type
Parking brake Spring applied, multiple-disc type
Retarder Oil-cooled, multiple-disc rear brakes act as retarder
Secondary brake Manual pedal operation When hydraulic pressure drops below the rated level, parking brake is automatically actuated
Brake surface
Front 50 in 2 968 cm2
Rear 7,881 in 2 50847 cm2
Body
Capacity:
Struck 23.5 yd3 18 m3
Heaped (2:1 ,SAE) 31.4 yd3 24 m3
Payload, maximum 40 U.S. tons 36.5 metric tons
rated 35 U.S. tons 32 metric tons
Material : (high-tensile-strength steel) 184,860 ps 130 kg/mm2
Structure V-shape body
Material thickness:
Bottom
Struck 0.75" 19 mm
Front 0.47" 12 mm
Sides 0.35" 9 mm
Target area (inside length x width) 18'1" x 11'1" 5500 mm x 3380 mm
Dumping angle 48°
Height at full dump 26'0" 7925 mm
Heating Exhaust heating
HyDRaulic System
Hoist cylinder Twin, 2-stage telescopic type
Relief pressure 2,990 psi 210 kg/cm2
Hoist time 10 sec
Weight
Empty weight 69,700 lb 31600 kg
Gross vehicle weight with 32 metric ton (35 U.S.ton) payload 140,390 lb 63680 kg
Max. gross vehicle weight:
Standard tire 152,740 lb 69280 kg
Not to exceed max. gross vehicle weight, including options, fuel
Weight distribution:
Empty: Front axle 51.7%
Rear axle 48.3%
Loaded: Front axle 33%
Rear axle 67%
tires
Standard Tires 18.00-33-32PR
Service Refill Capacities
Fuel tank 127.9 U.S. Gal 484 ltr.
Engine oil 13.2 U.S. Gal 50ltr
Torque converter, transmission and retarder cooling 23.8 U.S. Gal 90 ltr
Differential 11.9 U.S. Gal 45 ltr
Final drive (left and right) 7.9 U.S. 30 ltr
Hydraulic system 34.1 U.S. gal 129 ltr
Suspension (total) 11.7 U.S. gal 44.2 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics