Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Des Allemands, Louisiana

The days when only large scale companies could execute construction projects are long gone now. Today, the availability of heavy construction equipment rentals in Des Allemands and elsewhere have ensured that small companies do not have to depend on the availability of necessary capital to buy expensive machinery such as forklifts, concrete material handling equipment, dozers, excavators, etc.

But, finding the right vendor without having to spend several days short-listing and interviewing potential construction equipment suppliers is nothing short of a challenge for new players in the industry. This is where we can help.

We have a huge network of companies having inventories of all types of ready-to-rent construction equipment in Des Allemands.

Getting access to this network of some of the most reputed suppliers is easy. Dial our toll free number today or fill out the short contact form on the right.

The vendors will contact you within hours.

Equipment Rental Des Allemands, Construction equipment rental Des Allemands, Construction Des Allemands, Heavy Equipment Rental Des Allemands.

Komatsu Dozers D37PXi-23
D37PXi-23 Crawler Dozer
iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 i³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 91 HP 68 kW
ISO 9249 / SAE J1349 - Net 89 HP 66 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated twostage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed

Minimum turning radius* 91" 2.3 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid track frame
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Tractor for inside mounted blade (PAT)
Number of track rollers (each side) 6
Number of carrier rollers (each side) 1
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 1.9" 47 mm
Shoe width (standard) 24" 600 mm
Ground contact area 4,148 in² 26760 cm²
Ground pressure
(with standard shoe)
4.67 psi 0.33 kgf/cm² / 32.2 kPa
Track gauge 5'7" 1710 mm
Length of track on ground 7'4" 2230 mm
Link pitch 6.1" 154 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 16.9 U.S. gal 64 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 17,064 lb 7740 kg
Operating weight: Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 19,533 lb 8860 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min / 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.0" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Blade pitch 1 adjustable linkage
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

John Deere Crawler Dozers 650K XLT
We hear you loud and clear.

When our customers sound off, we listen. So when you asked us to turn down the noise and turn up productivity on our 650K Crawler Dozer, we responded with a spacious, redesigned cab that's up to 50% quieter. And a more powerful EPA Interim Tier 4 (IT4)/EU Stage IIIB diesel engine.

Equipment owners and operators will also find lots more to like in the K-Series - such as a hydraulic-driven fan that provides efficient cooling, reduces noise, and conserves precious fuel. And a convenient sealed-switch module for fingertip control of numerous one-of-a-kind features and functions.

The K-Series are loaded with even more performance enhancements, like Total Machine Control (TMC). Standard on all of our K-Series Crawler Dozers, this performance-enhancing feature provides customized decelerator mode and response, forward/reverse ground-speed ranges, steering modulation, and more. It enables your operators to do their best, by being themselves.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech PWX 4045
Net Power, kW (hp) @ Rated rpm 75 (101) @ 2200
Displacement, L (cu in) 4.5 (276)
Transmission
Type Hydrostatic
Speed Range - forward 1
Speed Range - reverse 1
Maximum Speeds Forward, kph (mph) 8 (5)
Maximum Speeds Reverse, kph (mph) 8 (5)
Final Drives
Type Triple Reduction
Steering
Type --
Hydraulic System
Pump Type Open Centre - Gear Pump
Pump Flow, L/min (gpm) 57 (15)
System pressure, kPa (psi) 20680 (3000)
Undercarriage
Track Gauge, mm (ft in) 1550 (5 ft 1 in)
Length of Track on Ground, mm (ft in) 2337 (7 ft 8 in)
Standard shoe type Single Grouser - Moderate Service
Ground Contact Area, cm sq (sq in) 21479 (3329)
Ground Pressure, kPa (psi) 40.6 (5.89)
No. of Track Rollers 7
Track Pitch, mm (in) 171 (6.7)
Track Shoes, each side 40
Track Oscillation --
Dozer
Blade Width, mm (ft in) 2667 (8 ft 9 in)
Blade Height, mm (ft in) 1067 (3 ft 6 in)
SAE Blade Capacity, cu m (cu yd) 2.2 (2.9)
Blade Lift Height, mm (ft in) 818 (2 ft 8 in)
Digging Depth, mm (in) 500 (19.7)
Overall Width with Blade Angled, mm (ft in) not published
Blade Tilt, mm (ft in) 363 (1 ft 2 in)
Dimensions
Height w/ROPS, mm (ft in) 2758 (9 ft 1 in)
Length w/Dozer, mm (ft in) 4393 (14 ft 5 in)
Ground Clearance, mm (in) 391 (15.4)
Capacities
Fuel Tank, L (gal) 237 (62.5)
Hydraulic Reservoir, L (gal) 34 (9)
Weight
SAE Operating Weight, kg (lb) 8890 (19599)

Komatsu Dozer D275AX-5WH
D275AX-5WH
The D275AX-5WH is a dozer specially equipped to fill the requirements of the sanitary landfill market. Guarding like fore and aft striker bars, belly pan with electric winch, chassis seal package and seal guards on the final drives, pivot shafts and idlers provide the protection needed in the severe landfill environment. Hydrostatic steering gives the D275AX-5SL the maneuverability required on a landfill and the lock-up torque converter provides the pushing power needed while still saving fuel.

Specification
Net Horsepower 410 HP 306 kw
Operating weight (Approx.) 116,528 lb** 52856 kg**
Engine Model Komatsu SAA6D140E-5
Rated Engine RPM 2000
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Track rollers (each side) 7
Carrier rollers (each side) 2
Width of standard track shoe 24" 610 mm
Length of track on ground 2000 rpm
Fan drive type 11'5" 3480 mm
Ground contact area (with standard shoe) 6,580 in² 42456 cm²
Track gauge 7'5" 2260 mm
** with Full-U Blade
Note: Operating weight includes blade indicated, landfill counterweight, steel cab, ROPS, operator, standard equipment, landfill package, rated capacity of lubricant, coolant, and full fuel tank.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics