Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Grambling, Louisiana

The days when only large scale companies could execute construction projects are long gone now. Today, the availability of heavy construction equipment rentals in Grambling and elsewhere have ensured that small companies do not have to depend on the availability of necessary capital to buy expensive machinery such as forklifts, concrete material handling equipment, dozers, excavators, etc.

But, finding the right vendor without having to spend several days short-listing and interviewing potential construction equipment suppliers is nothing short of a challenge for new players in the industry. This is where we can help.

We have a huge network of companies having inventories of all types of ready-to-rent construction equipment in Grambling.

Getting access to this network of some of the most reputed suppliers is easy. Dial our toll free number today or fill out the short contact form on the right.

The vendors will contact you within hours.

Equipment Rental Grambling, Construction equipment rental Grambling, Construction Grambling, Heavy Equipment Rental Grambling.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Trucks HM300-5
HM300-5 Articulated Truck

The 30.9 ton capacity HM300-5 is powered by a Tier 4 final Komatsu engine. A Komatsu Traction Control System along with two working modes and a standard payload meter (PLM) provide the operator with the tools needed to complete the job efficiently and profitably even in the most severe underfoot conditions. A heated, center located air suspension operator seat, a forward facing training seat, separate rear view monitor, and large LED multi-language monitor ensure the operator is working productively in comfort throughout a full shift.

Engine
Model Komatsu SAA6D125E-6*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 125 mm 4.92"
Stroke 150 mm 5.91"
Piston displacement 11.0 ltr 671 in3
Horsepower :
SAE J1995 248 kW 332 HP
ISO 9249 / SAE J1349 242 kW 324 HP
Rated rpm 2000 rpm
Fan drive type Hydraulic driven
Maximum torque 171 kg-m 1,237 ft lbs
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner, plus dust indicator
*EPA Tier 4 Final emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 58.6 km/h 36.4 mph
Axles
Full time all wheel drive with Komatsu Traction Control System (K-TCS)
Final drive type Planetary gear
Ratios:
Differential 3.154
Planetary 4.667
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Standard ISO5010, SAE J1511
Minimum turning radius, wall to wall 8.10 m 26'7"
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 13.4 m3 17.5 yd3
Heaped (2:1, SAE) 17.1 m3 22.4 yd3
Payload 28.0 metric tons 30.9 U.S. tons
Material - high tensile strength steel 130 kg/mm2 184,925 psi
Material thickness:
Bottom 14 mm 0.55"
Front 8 mm 0.31"
Sides 12 mm 0.47"
Target area - (inside length x width) 5250 mm x 2685 mm 17'3" x 8'10"
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 300 kg/cm2 / 29.4 Mpa 4264 psi
Hoist time 10.5 sec
Weight (approximate)
Empty weight 25,395 kg 55,986 lbs
Gross vehicle weight 53,475 kg 117,892 lbs
Weight distribution:
Empty:
Front axle 58.9%
Center axle 22.5%
Rear axles 18.6%
Loaded:
Front axle 30.8%
Center axle 36.0%
Rear axles 33.2%
Tires
Standard tire 23.5 R25
Service Refill Capacities
Fuel tank 388 ltr 102.5 U.S. gal
DEF tank 32.8 ltr 8.7 U.S. gal
Engine oil 35 ltr 9.2 U.S. gal
Torque converter, transmission and retarder cooling 80 ltr 21.1 U.S. gal
Differentials (total) 71.5 ltr 18.9 U.S. gal
Final drives (total) 23 ltr 6.1 U.S. gal
Hydraulic system 103 ltr 27.2 U.S. gal
Suspension (total) 10.4 ltr 2.7 U.S. gal

Komatsu Trucks 830E-1AC

830E-1AC Electric Drive Truck

A leader in the 240 ton class mining truck, the 830E-1AC is built on a tradition of excellence dating back to it's introduction as a DC drive truck in 1989. Customers experience the lowest cost per ton operations in the industry while utilizing the 830E-1AC as their prime material hauler. Powered by a Komatsu SDA16V160 engine, the General Electric drive system provides efficient transfer of the power to the ground while demonstrating low fuel consumption and excellent reliability. The dynamic retarding provides the greatest braking efficiency in the industry, utilizing advanced logic including retard speed control. The modern operators cab is fully ROPS/FOPS certified and designed for maximum operator comfort. With a host of options designed for mine specific needs, the 830E-1AC is the only 240 ton class truck you will ever need.

Engine
*Make and model Komatsu SDA16V160
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
*Rated brake power@ 1900 rpm 2,500 HP 1865 kW
**Flywheel power@ 1900 rpm 2,360 HP 1761 kW
Weight (wet) 21,182 lb 9608 kg
* Tier 2 emissions certified. Tier 1 emissions engine is optional outside of North America.
** Rated brake power is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump
***Flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent gross engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC current
Alternator G.E. GTA-41
Dual impeller in-line blower 9,000 cfm 255 m³/min
Control AC torque control system
Motorized wheels GEB25
Ratio 31.875:1
Speed (maximum) 40 mph 64 kph
* Wheel motor application Depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, tires (bias ply or radial)
Standard tire 40.00R57
*Optional tire 46/90R57
Standard five (5) piece rim 737 mm x 1488 mm x 152 mm rims 29'' x 57'' x 6'' rims
Typical tire weight 46,476 lbs 21081 kg
* Fitment of optional 46/90R57 tire shall increase nominal GVW rating to 392357 kg / 865,000 lbs
Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet - tensile strength steel (two-piece) 19 mm / 1379 mPa 0.75'' / 200,000 psi
Front sheet - tensile strength steel 12 mm / 1379 mPa 0.47'' / 200,000 psi
Side sheet - tensile strength steel 8 mm / 1379 mPa 0.31'' / 200,000 psi
Canopy sheet 5 mm / 690 mPa 0.19'' / 100,000 psi
Struck 153 yd³ 117 m³
Standard SAE heaped 2:1 193 yd³ 147 m³
Standard Komatsu body weight 61,000 lbs 27669 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2, (SAE J1040/ISO 3449) adjustable air suspension seat w/lumbar support and arm rests, passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted glass, power windows, Komatsu Payload Weighing System, 55,000 Btu/hr heater and defroster, 21,600 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box-sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material - tensile strength steel 70,000 psi 482.6 mPa
Casting material - tensile strength steel 90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.25'' 32 mm
Side plate thickness 0.62'' 16 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
System meets ISO 3450/1996
Service brakes: all-hydraulic actuated
Front Wheel speed disc.Three calipers on a 47.75" / 1213 mm O.D. disc.
Rear Dual disc armature speed. Two 25" / 635 mm O.D. discs per side.One caliper per disc.
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch-activated
Parking brakes Spring-applied, hydraulically released, with speed application protection.
Electric dynamic retarder (max.) 4000 hp 2983 kW
Suspension
HYDRAIR® II
Variable rate hydro-pneumatic with integral rebound control.
Max. front stroke 13.2'' 335 mm
Max. rear stroke 11.0'' 279 mm
Max. rear axle oscillation 10.3°
Cooling System
L&M radiator assembly with sight gauge. Deaeration-type top tank. Dual pass cooling.
Radiator frontal area. 67.2 ft² 6.24 m²
Service Capacities
Cooling system 150 U.S. gal 568 L
*Crankcase 74 U.S. gal 280 L
Hydraulic system 250 U.S. gal 946 L
Motor gear box 10 U.S. gal 38 L
Fuel 1200 U.S. gal 4542 L
* Includes lube oil filters
Hydraulic System
Cooling system 150 U.S. gal 568 L
*Crankcase 74 U.S. gal 280 L
Hydraulic system 250 U.S. gal 946 L
Motor gear box 10 U.S. gal 38 L
Fuel 1200 U.S. gal 4542 L
* Includes lube oil filters
Electrical System
4 x 8D 1450 CCA, 12 volt batteries, in series/parallel,deck-mounted with disconnect switch
Alternator 24-volt 140 amp
Lighting 24 volt
Cranking motors two/24 volt
Weight Distribution
Empty Vehicle Weight:(Wet, 100% fuel, no options, standard Komatsu body, standard tires)
Front axle 179,190 lb 81279 kg 50 %
Rear axle 182,810 lb 82921 kg 50 %
Total EVW 362,000 lb 164200 kg
Gross Vehicle Weight (Nominal):
Front axle 280,715 lb 127330 kg 33 %
Rear axle 569,936 lb 258519 kg 67 %
Total 850,650 lb 385848 kg
Nominal Payload* 488,650 lb 221648 kg
244 U.S. ton
*Nominal payload is as defined within Komatsu America Corporation’s payload policy documentation. In general, the nominal payload must be adjusted for the specific vehicle configuration and site application.
The figures above are provided for basic product description purposes. Please contact your Komatsu distributor for specific application requirements.

John Deere Backhoe Loader 410K Tier 3
Get maximum versatility, end to end.

Want to get the most from your backhoe? Choose a 410K Tool Carrier (TC). Your operators will enjoy responsive near-effortless backhoe control and parallel lift that's simply unparalleled. One-of-a-kind electrohydraulic (EH) design delivers unsurpassed capability. The EH joysticks mounted in the armrests make it easy to move from loader to back hoe and back again. They also provide smooth, single-lever control of auxiliary loader attachments, extendable dipperstick, backhoe auxiliary attachments, hammer, mechanical-front-wheel drive and horn - all operating with the seat turned 90 degrees. With true parallel-lift throughout the lift arc, it gives you the finesse to handle everything from pipe to pallets. And unlike mechanical loader linkages, our exclusive EH-controlled loader employs fewer parts, so you'll spend less time on maintenance.

You wont have to worry about replacing current attachments, either. The standard quick-coupler lets you hook up to a variety of older John Deere and other brands of loader attachments. And to make sure you stay up and running, the 410K TC comes standard with JDLinkTM and Service ADVISORÃTM Remote.

Engine
Emission Rating Tier 3
Engine Make / Engine Model John Deere / PowerTech E 4045HT054
Net Power, kW (hp) @ Rated rpm 75 (101) @ 2000
Displacement, L (cu in.) 4.5 (276)
electrical
Voltage 12
Alternator amps 90
transmission
Type Powershift
Max. Travel Speed - fwd, kph (mph) 40 (25)
Max. Travel Speed - rev, kph (mph) 21.2 (13.2)
Brakes
Type Wet Multi Disc
Actuation Hydraulic w/Power Assist
hydraulic system
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 159 (42)
System Pressure, kPa (psi) 24993 (3625)
Backhoe, Fixed length dipperstick
Max. Digging Depth, mm (ft in) 6100 (20 ft )
2ft (0.61m) Flat Bottom, mm (ft in) 4780 (15 ft 8 in)
Reach from Swing Center, mm (ft in) 5990 (19 ft 8 in)
Truck Loading Height, mm (ft in) 3810 (12 ft 6 in)
Digging Force Crowd, kN (lb) 38.9 (8741)
Bucket, Power Dig, kN (lb) 65.8 (14801)
deere lift capacities are according to sae j31
Max. Digging Depth, mm (ft in) 6100 (20 ft )
2ft (0.61m) Flat Bottom, mm (ft in) 4780 (15 ft 8 in)
Reach from Swing Center, mm (ft in) 5990 (19 ft 8 in)
Truck Loading Height, mm (ft in) 3810 (12 ft 6 in)
Digging Force Crowd, kN (lb) 38.9 (8741)
Bucket, Power Dig, kN (lb) 65.8 (14801)
Deere figures listed are 87% of the max lift force available
Boom Lift Cap. @ Ground Level, kg (lb) 1422 (3136)
Dipperstick Lift Capacity @ 12' Height, kg (lb) 2565 (5655)
backhoe, standard bucket
SAE Heaped Capacity, cu m (cu ft) 0.21 (7.5)
Backhoe Bucket Width, mm (in) 610 (24)
Bucket Rotation, deg 190
Loader
SAE Heaped Capacity, cu m (cu yd) 1 (1.308)
Loader Bucket Width, mm (in) 2337 (7 ft 8 in)
Breakout force, kN (lb) 45.8 (10300)
Lift Capacity to Full Height, kg (lb) 3269 (7200)
Dump Clearance @ 45 deg, mm (ft in) 2690 (8 ft 10 in)
Dump Reach, mm (in) 762 (30)
Bucket Hinge Pin Max. Height, mm (ft in) 3350 (11 ft )
Coupler (Mechanical, Hydraulic) Option
Two wheel drive
Wheelbase, mm (in) 2110 (6 ft 11 in)
Curb Turning Radius w/out Brakes, mm (ft in) 3940 (12 ft 11 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3440 (11 ft 3 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5380 (17 ft 8 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 4945 (16 ft 3 in)
Four WHEEL DRIVE
Wheelbase, mm (in) 2140 (7 ft )
Curb Turning Radius w/out Brakes, mm (ft in) 4080 (13 ft 5 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3580 (11 ft 9 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5525 (18 ft 2 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 5055 (16 ft 7 in)
dimensions
Transport Height, mm (ft in) 3940 (12 ft 11 in)
Transport Length, mm (ft in) 7290 (23 ft 11 in)
Transport Width, mm (ft in) 2180 (7 ft 2 in)
Width Over Tires, mm (in) 2180 (7 ft 2 in)
capacities
Fuel Tank, L (gal) 155.2 (41)
Hydraulic Reservoir, L (gal) 37.1 (9.8)
weight 2wd, rops
SAE Operating Weight, kg (lb) 7182 (15833)
Metric Ton Weight, kg (lb) 7.182 (15.833)
WEIGHT 4WD, cab, ext.hoe
SAE Operating Weight, kg (lb) 7691 (16956)
Metric Ton Weight, kg (lb) 7.691 (16.956)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics