Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Kenner, Louisiana

The days when only large scale companies could execute construction projects are long gone now. Today, the availability of heavy construction equipment rentals in Kenner and elsewhere have ensured that small companies do not have to depend on the availability of necessary capital to buy expensive machinery such as forklifts, concrete material handling equipment, dozers, excavators, etc.

But, finding the right vendor without having to spend several days short-listing and interviewing potential construction equipment suppliers is nothing short of a challenge for new players in the industry. This is where we can help.

We have a huge network of companies having inventories of all types of ready-to-rent construction equipment in Kenner.

Getting access to this network of some of the most reputed suppliers is easy. Dial our toll free number today or fill out the short contact form on the right.

The vendors will contact you within hours.

Equipment Rental Kenner, Construction equipment rental Kenner, Construction Kenner, Heavy Equipment Rental Kenner.

KKomatsu Dozers D39PX-23
D39PXi-23 Crawler Dozer
iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 107 HP 79 kW
ISO 9249 / SAE J1349 - Net 105 HP 78 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.

Minimum turning radius* 87" 2.2 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 6
Type of shoes (standard) Single grouser
Number of shoes (each side) 39
Grouser height 2.1" 53 mm
Shoe width (standard) 20" 510 mm
Ground contact area 3,731 in 24072 cm²
Ground pressure
(with dozer, ROPS cab)
5.64 psi 0.40 kgf/cm² / 38.9 kPa
Track gauge 5'4" 1620 mm
Length of track on ground 7'9" 2360 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 15.8 U.S. gal 60 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,387 lb 8340 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,922 lb 9490 kg
hydraulic system
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.  
Positions:  
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

If you own a construction company, run a warehouse or have a goods transport business in Whiteriver, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.

But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.

But, finding reliable Excavator rentals in Whiteriver isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Whiteriver.

This is where HeavyRentals.Equipment can help.

Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Whiteriver as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Whiteriver against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.

As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Whiteriver you wish to choose.

Komatsu Dozer D275AX-5
D275AX-5
The pushing power and production of the D275AX-5 comes from the 452 horsepower its Komastu engine produces and the lock-up torque converter. Other features such as hydrostatic steering and K-bogie system give the D275AX-5 the maneuverability to keep up with fast scraper pushing as well as tough ripping. To make the D275AX-5 even more productive, the unique Sigma dozer blade can be mounted to produce 15% more than a conventional blade.

Engine
Model Komatsu SAA6D140E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed, electronic
Horsepower :
SAE J1995 - Gross 452 HP 337 kW
ISO 9249 / SAE J1349 - Net 449 HP 335 kW
Hydraulic fan at maximum speed - Net 410 HP 306 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically-actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear Forward Reverse
1st 2.2 mph / 3.6 km/h 2.9 mph / 4.7 km/h
2nd 4.2 mph / 6.7 km/h 5.4 mph / 8.7 km/h
3rd 7.0 mph / 11.2 km/h 9.3 mph / 14.9 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket rims are bolt-on for easy replacement.
Steering System
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to the left to make a left turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius 12'10 3.9 m
Undercarriage
K-Bogie undercarriage
Lubricated track rollers are resiliently mounted on the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.Track shoes
Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Cylindrical, high-tensile-strength steel construction
Rollers and idlers Lubricated track rollers
K-Bogie undercarriage Lubricated track rollers are resiliently mounted to the roller frame with a series of K-Bogies whose oscillating motion is cushioned by rubber pads.
Extreme service track shoes Lubricated tracks. Unique seals help prevent entry of foreign abrasive material into pin-to-bushing clearances to provide extended service life. Track tension is easily adjusted with a grease gun.
Number of shoes (each side) 39
Grouser height:
Single grouser 3.5'' 88 mm
Shoe width (standard) 24'' 610 mm
Ground contact area 6,580 in² 42456 cm²
Ground pressure (tractor only) 12.7 psi 87.3 kPa / 0.89 kg/cm²
No. of track rollers 7
No. of carrier rollers 2
Extreme service shoes 24" 610 mm
Additional weight 0 lb 0 kg
Ground contact area 6,580 in² 42456 cm²
SIGMADOZERTM Strengthened Dual tilt Ground pressure** 17.2 psi 119 kPa / 1.21 kg/cm²
Semi-U tilt dozer Ground pressure** 16.6 psi 115 kPa / 1.17 kg/cm²
Extreme service shoes 28'' 710 mm
Additional weight 1,260 lb 570 kg
Ground contact area 7,659 in² 49416 cm²
SIGMADOZERTM Strengthened Dual tilt Ground pressure** 15.0 psi 103 kPa / 1.05 kg/cm²
Semi-U tilt dozer Ground pressure** 14.5 psi 100 kPa / 1.02 kg/cm²
Extreme service shoes 30'' 760 mm
Additional weight 1,870 lb 850 kg
Ground contact area 8,199 in² 52896 cm²
SIGMADOZERTM Strengthened Dual tilt Ground pressure** 14.1 psi 97 kPa / 0.99 kg/cm²
Semi-U tilt dozer Ground pressure** 13.7 psi 94 kPa / 0.96 kg/cm²
** Ground pressure based on tractor, cab, ROPS, operator, giant ripper, standard equipment, and shoe and blade shown in the chart.
Coolant and Lubricant Capacity (refill)
Fuel tank 222 U.S. gal 840 ltr
Coolant 26.4 U.S. ga 100 ltr
Engine 13.7 U.S. gal 52.0 ltr
Torque converter, transmission, bevel gear, and steering system 23.8 U.S. gal 90 ltr
Final drive (each side) 10.6 U.S. gal 40 ltr
Operating Weight
Tractor weight - Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 83,070 lb 37680 kg
Operating weight - Including Strengthened Dual tilt SIGMADOZERTM, giant ripper, steel cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 113,600 lb 51530 kg
Ground pressure 17.2 psi 119 kPa / 1.21 kg/cm²
Hydraulic System
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control units: All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 230 ltr/min / 60.8 U.S. gal/min at rated engine rpm.
Relief valve setting 3,980 psi 27.5 MPa / 280 kg/cm²
Control valves: Spool control valves for SIGMADOZERTM, Semi-U tilt and Full-U tilt dozer
Positions:
Blade lift Raise, hold, lower, and float.
Blade tilt Right, hold, and left.
Note: Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
Positions:
Ripper lift Raise, hold, and lower.
Ripper tilt Increase, hold, and decrease.
Hydraulic cylinders Double-acting, piston.
Hydraulic cylinders/ Number of cylinders: Bore Bore
Blade lift / 2 4.72'' 120 mm
Blade tilt / 1(Single tilt), 2(Dual tilt) 7.09'' 180 mm
Ripper lift / 2 7.09'' 180 mm
Ripper tilt / 2 6.30'' 160 mm
Hydraulic oil capacity (refill):
SIGMADOZERTM, Semi-U dozer, or U dozer 34.3 U.S. gal 130 ltr
Ripper equipment (additional volume):
Giant ripper 10.0 U.S. gal 38 ltr
Multi-shank ripper 10.0 U.S. gal 38 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics