Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Anson,Maine

In the construction industry, one of the best ways to free up your company’s capital is to opt for a rental model for heavy construction equipment in Anson. Heavy machinery demands a big chunk of investment even if you buy the basic equipment, and needless to mention, routine upkeep can be very costly in case construction projects are not lined up at all times; idle machinery in itself is a cost you cannot ignore.

With construction equipment rental service in Anson, you only incur machinery expenses
when you rent them for an ongoing job. So, you are completely free from the ever growing costs of construction equipment ownership. The money you save here can be used for numerous other business expenses or for expansion.

Make a smart decision today. Dial our toll free number and speak to vendors in our network within hours!

You can also contact us through the contact-form (on the right). Expect a response within minutes on a working day!

Equipment Rental Anson, Construction equipment rental Anson, Construction Anson, Heavy Equipment Rental Anson.

JCB Light Equipment FP 1540W

FP 1540W

The JCB FP1540W forward vibratory plate is 50% heavier and 71% more powerful than the FP1030W, weighing in at 91 kg and powered by a 3.6 kW Honda engine. Centrifugal force is also 50% improved at 15 kN. It's specifically designed for easy, effective compaction of asphalt, soil and other less cohesive materials.

Built for Low hand and arm vibration levels and high productivity, the FP1540W features a wear-resistant high-grade cast tamping plate for optimum durability.

It also has an oil bath lubrication system to protect its vibration bearings, shock mounts for the engine and a roll cage that also acts as a lifting bail.

The FP1540W is designed for fast travel and ultimate productivity. The options list consists of transport wheels, a water sprinkler system and rubber paving stone pads.

Compaction Performance
Operating Weight 91kg
Plate Width 400mm
Engine
Maximum Engine Power 3.6kW

New Holland Compact Wheel Loaders W50B TC

Compact Wheel Loaders W50BTC

PRECISE CONTROL AND LOAD PLACEMENT.
New Holland compact wheel loaders provide a combination of increased versatility, increased comfort and control so you get the job done more quickly and efficiently. SMART precise load control and speed control improves operating efficiency. And these wheel loaders do much more than load. With big engine and hydraulic power and a choice of buckets and attachments, you can scrape, grade, haul and more.

Engine
Model Tier III certified FPT F5C
Horsepower, gross, hp (kW) 54 (41)
Horsepower, net, hp (kW) 50 (38)
Rated rpm 2,300
Torque, net (SAE J1349) 162 lb-ft @ 1400
Displacement, cu in (l) 195 (3 11)
Aspiration Natural
Transmission
1st Gear, mph 3.1
2nd Gear, mph 12.4
High travel speed (HTS) option engaged, mph. -
Hydraulic
Pump capacity, gpm (lpm) 13.7 (52)
System relief pressure, psi 3,625
Performance - bucket with quick coupler
Bucket capacity heaped, cu yd ( m³) .92 (.70)
Bucket capacity struck, yd (m) .73 (.56)
Breakout force, lbs (kg) 8,386 (3804)
Static tip load straight, lbs (kg) 7,377 (3346)
Static tip load full turn, lbs (kg) 6,489 (2944)
Operating weight, lbs (kg) 10,173 (4615)
Dump height, ft in (mm) 8’ 3” (2529)
Dump reach, in (mm) 33 (825)
Dimensions
Overall length 17′ 7″ (5360 mm)
Wheelbase 85.9″ (2182 mm)
Height to top of ROPS/Cab 8′ 10″ (2710 mm)
Dump reach at full height @ 45° 34″ (825 mm)
Dump reach @ 7’ and 45° dump 3′ 10″ (1172 mm)
Dump clearance at full height @ 45° 8′ 3″ (2529 mm
Hinge pin height 10′ 8″ (3243 mm)
Dig depth below grade 3.6″ (92 mm)
Ground clearance under axle 13″ (330 mm)
Width over tires 6′ 1″ (1841 mm)
Bucket rollback at carry 52°
Bucket rollback fully raised 54°
Turning radius 12′ 7″ (3847 mm)
Articulation angle 41˚

JCB Light Equipment FP 1030W

FP 1550W

Uprated from the JCB FP1540W forward vibratory plate, the FP1550W weighs 100 kg and is powered by a 3.6 kW Honda engine. Centrifugal force is 15 kN. The FP1550W is specifically designed for easy, effective compaction of asphalt, soil and other less cohesive materials.

Built for Low hand and arm vibration levels and high productivity, the FP1550W features a wear-resistant high-grade cast tamping plate for optimum durability.

It also has an oil bath lubrication system to protect its vibration bearings, shock mounts for the engine and a roll cage that also acts as a lifting bail.

The FP1550W is designed for fast travel and ultimate productivity. The options list consists of transport wheels, a water sprinkler system and rubber paving stone pads.

Compaction Performance
Operating Weight 100kg
Plate Width 500mm
Engine
Maximum Engine Power 3.6kW

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics