Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Etna,Maine

In the construction industry, one of the best ways to free up your company’s capital is to opt for a rental model for heavy construction equipment in Etna. Heavy machinery demands a big chunk of investment even if you buy the basic equipment, and needless to mention, routine upkeep can be very costly in case construction projects are not lined up at all times; idle machinery in itself is a cost you cannot ignore.

With construction equipment rental service in Etna, you only incur machinery expenses
when you rent them for an ongoing job. So, you are completely free from the ever growing costs of construction equipment ownership. The money you save here can be used for numerous other business expenses or for expansion.

Make a smart decision today. Dial our toll free number and speak to vendors in our network within hours!

You can also contact us through the contact-form (on the right). Expect a response within minutes on a working day!

Equipment Rental Etna, Construction equipment rental Etna, Construction Etna, Heavy Equipment Rental Etna.

Driveable Vertical Mast Lift 15MVL

JLG Driveable Vertical Mast Lift 15MVL
Key Specs

  • Machine Width: 2 ft 6 in. / 0.76 m
  • Platform Height: 12 ft / 3.66 m

Key Features

  • Low maintenance, energy efficient and environmentally clean
  • Longer running time than any lift in its class keeps you on the job longer, increasing your productivity
  • Lightweight design for transport in freight elevators
Dimensional Data
Ground Clearance 3 in. / 0.08 m
Ground Entry Height 1 ft 10 in. / 0.56 m
Machine Height 5 ft 5 in. / 1.65 m
Machine Length 4 ft 6 in. / 1.37 m
Machine Width 2 ft 6 in. / 0.76 m
Platform Dimension A 4 ft 2 in. / 1.26 m
Platform Dimension B 2 ft 3 in. / 0.69 m
Platform Height 12 ft / 3.66 m
Tire Size 100 x 323 (Solid, non-marking)
Reach Specifications
Platform Height 12 ft / 3.66 m
Working Height 18 ft / 5.49 m
Performance
Drive Speed - Platform Elevated 0.50 mph / 0.80 km/h
Drive Speed - Platform Lowered 3 mph / 4.83 km/h
Drive System 24V Electric, 8 hp
Gradeability 25 %
Maximum Drive Height 12 ft / 3.66 m
Maximum Lift Height 12 ft / 3.66 m
Platform Capacity 500 lb / 226.80 kg
General
Machine Weight 1740 lb / 789.25 kg
Power Source
Batteries 4 x 6V, 220 amp-hr

New Holland Skid Steer Loader L213

Skid Steer Loader - L213

MORE DIGGING AND PUSHING POWER BY DESIGN
New Holland Skid Steer Loader model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model ISM / N844L
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135.2 (2.216)
Fuel injection Indirect
Air intake Naturally aspirated
Horsepower per SAE J1349 Gross hp (kW) 49 (36) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 46 (34) @ 2800 rpm
Peak torque, lb-ft (Nm) 105.5 (143) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.4 (11.9)
Travel speed, high range (optional), mph (km/h) NA
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 112 (2845)
Top of ROPS, in (mm) 75.5 (1919)
Bottom of level bucket, fully raised, in (mm) 105.6 (2682)
Overall length without attachment with coupler, in (mm) 95.9 (2435)
Dump angle, degrees 40°
Dump reach (max height), in (mm) 18.5 (469)
Rollback, bucket on ground, degrees 26°
Rollback, bucket at full height, degrees 95°
Wheelbase, in (mm) 37 (941)
Ground clearance (bottom of belly pan), in (mm) 7 (178)
Angle of departure, degrees 22°
Clearance circle without bucket, in (mm) 48.7 (1237)
Clearance circle rear, in (mm) 56.4 (1433)
Rear axle to bumper, in (mm) 33.8 (858)
Overall width, in (mm) 59.8 (1518)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 17.5 (66.2)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) -
Performance Specs
Rated operating load, 50% tip, lbs (kg) 1300 (590)
Tipping load, lbs (kg) 2600 (1179)
Breakout force, lift cylinder, lbs (kN) 2850 (12.7)
Breakout force, bucket cylinder, lbs (kN) 4180 (18.6)
Operating weight, lbs (kg) 5070 (2300)

New Holland Skid Steer Loader L216

Skid Steer Loader 216

MORE DIGGING AND PUSHING POWER BY DESIGN
This model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model ISM / N844LT
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135.2 (2.216)
Fuel injection Indirect
Air intake Turbocharged with external EGR
Horsepower per SAE J1349 Gross hp (kW) 60 (45) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 57 (42) @ 2800 rpm
Peak torque, lb-ft (Nm) 139 (188) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.4 (11.9)
Travel speed, high range (optional),mph (km/h) NA
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 112 (2845)
Top of ROPS, in (mm) 75.5 (1919)
Bottom of level bucket, fully raised,in (mm) 105.6 (2682)
Overall length without attachment with coupler, in (mm) 95.9 (2435)
Dump angle, degrees 40°
Dump reach (max height), in (mm) 18.5 (469)
Rollback, bucket on ground, degrees 26°
Rollback, bucket at full height, degrees 95°
Wheelbase, in (mm) 37 (941)
Ground clearance (bottom of belly pan),in (mm) 7 (178)
Angle of departure, degrees 22°
Clearance circle without bucket, in(mm) 48.7 (1237)
Clearance circle rear, in (mm) 56.4 (1433)
Rear axle to bumper, in (mm) 33.8 (858)
Overall width, in (mm) 59.8 (1518)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 18.4 (69.7)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) -
Performance Specs
Rated operating load, 50% tip, lbs (kg) 1600 (725)
Tipping load, lbs (kg) 3200 (1455)
Breakout force, lift cylinder, lbs (kN) 3310 (14.7)
Breakout force, bucket cylinder, lbs (kN) 5270 (23.4)
Operating weight, lbs (kg) 5510 (2505)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics