Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Greenbush,Maine

In the construction industry, one of the best ways to free up your company’s capital is to opt for a rental model for heavy construction equipment in Greenbush. Heavy machinery demands a big chunk of investment even if you buy the basic equipment, and needless to mention, routine upkeep can be very costly in case construction projects are not lined up at all times; idle machinery in itself is a cost you cannot ignore.

With construction equipment rental service in Greenbush, you only incur machinery expenses
when you rent them for an ongoing job. So, you are completely free from the ever growing costs of construction equipment ownership. The money you save here can be used for numerous other business expenses or for expansion.

Make a smart decision today. Dial our toll free number and speak to vendors in our network within hours!

You can also contact us through the contact-form (on the right). Expect a response within minutes on a working day!

Equipment Rental Greenbush, Construction equipment rental Greenbush, Construction Greenbush, Heavy Equipment Rental Greenbush.

Komatsu Excavators PC45MR-3
PC45MR-3 Hydraulic Excavator

Got a job in tight quarters where you need to dig down 12 feet? No problem. The Komatsu Hydraulic Excavators PC45MR-3 can handle it and it also gives you the advantage of a swinging boom to get right up to foundations and the option of rubber, steel or roadliner tracks.

Engine
Model Komatsu 4D88E-6
Type Direct injection
Piston displacement 134 in³ 2.19 ltr
Horsepower @ 2400 rpm:
Net (ISO 9249/SAE J1349) 38.2 HP 28.5 kW
Electric System
Operation voltage 12 V
Battery 72 Ah
Alternator 40 A
Starter 2.3 kW
Hydraulic System
Type HydrauMind
Main pump:
Type Variable displacement x 2Gear x 1
Maximum flow 14.1 x 2 + 8.9 gal/min 53.5 x 2 + 33.8 ltr/min
Hydraulic motors:
Travel Variable displacement x 2
Swing Fixed displacement x 1
Maximum pressure setting 3,840 psi 270 kg/cm²
Auxiliary flow 18.5 gal/min 70 ltr/min
Performance
Travel speed:
High 2.9 mph 4.6 km/hr
Low 1.7 mph 2.8 km/hr
Swing speed 9.0 rpm
Ground pressure 3.6 psi 0.25 kg/cm²
Max. drawbar pull 9,440 lb 4280 kg
Gradeability 30°
Bucket digging force (ISO) 7,630 lb 3460 kg
Arm crowd force (ISO) 4,850 lb 2200 kg
Drives and Brakes
Drive method Hydrostatic
Type of travel brake Hydraulic lock
Type of travel shoe Rubber
Undercarriage
Adjustment of the track tension Grease gun
Number of carrier rollers (each side) 1
Number of track rollers (each side) 4
Refill Capacities
Fuel tank 17.2 U.S. gal 65 ltr
Hydraulic tank 5.3 U.S. gal 20 ltr
Engine 2.0 U.S. gal 6.7 ltr
Coolant 2.2 U.S. gal 8.5 ltr
Operating Weight (approximate)
Operating weight(with ROPS canopy and rubber shoe) 10,571 lb 4795 kg
Blade
Width x height 6'5" x 1'2" 1960 x 355 mm

cat lift trucks internel combustion pneumatic tire gp20n

These GP15N/GP35N heart-of-the-line forklifts will move 10,400 more loads per year than the leading competition*. They are built to push through the hardest work days to help you move more - all day, every day - by offering dependable performance, rugged durability and world-class support from your local dealer. The DP20N-DP35N diesel models are designed with cutting edge emissions technologies to comply with EPA Tier 4 final requirements.

 

*Based on cycle testing in which this model completed four more cycles per hour than the leading competitors. Assuming 10-hour shifts, five-day work weeks and a 52-week year, these results can be calculated to exceed 10,400 more cycles than the leading competition in a given year.

Quality

Quality

  • Presence Detection System (PDS) helps protect operators and loads by disengaging transmission and hydraulic functions when the operator leaves the normal seated position or the parking brake is not set
  • LED front work lights and rear combination lights burn brighter and last longer than conventional lights
  • Excellent travel speeds and powerful acceleration for greater productivity
  • Superior lift and lower speeds result in lower cycle times
  • Single speed c provides high levels of torque to power the truck, while offering a smoother ride
  • Hydraulic power steering provides exceptionally lower steering effort than conventional steering systems
  • Informative LED/LCD display panel is mounted to the steering column and keeps operators informed
  • Designed to maximize operator comfort and minimize fatigue:
    • Full-suspension vinyl seat resists shock and vibration
    • Generous floor area with through-the-floor pedal design, which helps promote natural motion
    • Return-to-set memory tilt steering column remembers operator preferences
    • Ergonomic controls are conveniently placed for easy access

Available Options

  • Fingertip hydraulic controls - offer precise control with near effortless motion
  • Full-suspension swivel seat - turns 12° to the right, allowing more natural movement for the operator when traveling in reverse
  • Swing down LP tank bracket - helps significantly reduce the effort it takes for an operator to change an LP tank
  • Seatbelt ignition interlock - engine will not run unless the operator is in the seat with the seat belt fastened
  • Closed operator cab - provides operator protection against the element
  • Rear handle with horn button - better operator support when driving in reverse
  • Light and strobe packages for your specific applications
specs
MODEL Model Capacity (lbs.) Max Travel Speed* (mph) Engine (HP/rpm) Right Angle Stack* (in.) Turning Radius (in.) Lift Speed* (fpm) Lower Speed* (fpm) Length (in.) Width (in.) Height (in.) Weight (lbs.)
GP20N 4,000 11.5 61/2700 105 86.6 128 98.4 98 45.3 84.5 7,370

Komatsu Excavators PC1250LC-8 MH
PC1250LC-8 MH Material Handler (55'-70' Reach)

If you have a material handling application that needs high lift and plenty of lifting power, the PC1250LC-8 MH requires a closer look. An elevated cab, with tiltable structure for service access, and up to a 70 - two piece front give the PC1250LC-8 MH tremendous operating range.

Engine
Model Komatsu SAA6D170E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 6.69" 170 mm
Stroke 6.69" 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 (Gross) 688 HP 514 kW
ISO 9249 / SAE J1349 - Net 672 HP 502 kW
Hydraulic fan at maximum speed / Net 620 HP 463 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic, variable speed, reversible
EPA Tier 3 and EU stage 3A emission certified.
Hydraulics System
Type Electronic Open-center Load Sensing System (EOLSS)
Number of selectable working modes 2
Main pump:
Type Variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow
For implement and travel 2 x 494 ltr/min 2 x 130.5 U.S. gpm
For swing 1 x 600 ltr/min 1 x 158.5 U.S. gpm
Sub-pump for control circuit Gear pump
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 3,910 psi 27.0 MPa 275 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders Bore x Stroke bore x stroke
Boom / 2 8.9" x 94.1" 225 mm x 2390 mm
Arm / 1 10.0" x 110.0" 254 mm x 2794 mm
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 5.5 rpm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 154,320 lb 70000 kg / 686 kN
Gradeability 70%
Maximum travel speed:
High 2.0 mph 3.2 km/h
Low 1.3 mph 2.1 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 55 each side
No. of carrier rollers 3 each side
No. of track rollers 10 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 359.3 US gal 1360 ltr
Radiator 37.5 US gal 142 ltr
Engine 22.7 US gal 86 ltr
Final drive, each side 5.5 US gal 21 ltr
Swing drive 2 x 6.4 US gal 2 x 24.3 ltr
Hydraulic tank 177.0 US gal 670 ltr
PTO 3.6 US gal 13.5 ltr
Operating Weight (approximate)
Operating weight w/o Grapple:
55' / 16.8 m 244,418 lb 110868 kg
70' / 21.3 m 279,157 lb 126626 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics