get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Monhegan, Maine

In the construction industry, one of the best ways to free up your company's capital is to opt for a rental model for heavy construction equipment in Monhegan. Heavy machinery demands a big chunk of investment even if you buy the basic equipment, and needless to mention, routine upkeep can be very costly in case construction projects are not lined up at all times; idle machinery in itself is a cost you cannot ignore.

With construction equipment rental service in Monhegan, you only incur machinery expenses
when you rent them for an ongoing job. So, you are completely free from the ever growing costs of construction equipment ownership. The money you save here can be used for numerous other business expenses or for expansion.

Make a smart decision today. Dial our toll free number and speak to vendors in our network within hours!

You can also contact us through the contact-form (on the right). Expect a response within minutes on a working day!

Equipment Rental Monhegan, Construction equipment rental Monhegan, Construction Monhegan, Heavy Equipment Rental Monhegan.

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Dozers D375A-6
D375A-6 Crawler Dozer

The D375A-6 is a great combination of power and balance; power for digging and pushing, balance for stability on slopes and for ripping. Giant or multi-shank rippers are available as is a wide lighting and maintenance options specifically designed for the demands of the mining industry. A lock-up torque converter lets the D375A-6 to shift into direct drive when pushing to increase speed and production.

Engine
Model Komatsu SAA6D170E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1,413 in³ 23.15 ltr
Governor All-speed and mid-range, electronic
Horsepower:
SAE J1995 - Gross 636 HP 474 kW
ISO 9249/SAE J1349 - Net 610 HP 455 kW
Hydraulic fan at maximum speed - Net 580 HP 433 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear Forward Reverse
1st 2.2 mph 3.5 km/h 2.9 mph 4.6 km/h
2nd 4.2 mph 6.8 km/h 5.5 mph 8.9 km/h
3rd L 5.0 mph 8.0 km/h 6.0 mph 9.7 km/h
3rd 7.3 mph 11.8 km/h 9.8 mph 15.8 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
Steering System
PCCS, joystick controlled, wet multiple-disc steering clutches are spring-loaded and hydraulically released.Wet multiple-disc, pedal/lever controlled steering brakes are spring-actuated hydraulically released and require no adjustment. Steering clutches and brakes are interconnected for easy, responsive steering.
Minimum turning radius 13'9" 4.2 m
Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Cylindrical, high-tensile-strength steel construction
Rollers and idlers Lubricated track rollers
K-Bogie undercarriage Lubricated track rollers are resiliently mounted to the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.
Extreme service track shoes Lubricated tracks. Unique seals prevent entry of foreign abrasives into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
Number of shoes (each side) 41
Grouser height:
Single grouser 3.7" 93 mm
Shoe width (standard) 24" 610 mm
Ground contact area 7,527 in² 48560 cm²
Ground pressure (tractor) 15.6 psi 108 kPa / 1.10 kg/cm²
Number of track rollers 8
Number of carrier rollers 2
Extreme service shoes: Ground contact area: Ground** pressure:
24'' / 610 mm Additional weight - 0 lb / 0 kg 7,527 in² 48560 cm² 21.0 psi 1.48 kgf/cm² / 145 kPa
28'' / 710 mm Additional weight - 1,500 lb / 680 kg 8,760 in² 56520 cm² 18.2 psi 1.28 kgf/cm² / 126 kPa
32'' / 810 mm Additional weight - 3,000 lb / 1360 kg 9,990 in² 64480 cm² 16.0 psi 1.13 kgf/cm² / 111 kPa
** Ground pressure based on tractor, Semi-U tilt dozer, giant ripper, cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
Coolant and Lubricant Capacity (refill)
Fuel tank 317.0 U.S. gal 1200 ltr
Coolant 31.7 U.S. gal 120 ltr
Engine 22.7 U.S. gal 86 ltr
Torque converter, transmission, bevel gear, and steering system 39.6 U.S. gal 150 ltr
Final drive (each side) 17.1 U.S. gal 65 ltr
Operating Weight
Tractor weight Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 117,290 lb 53200 kg
Including Semi-U tilt dozer, giant ripper, cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 157,940 lb 71640 kg
Ground pressure 21.0 psi 1.48 kg/cm² / 145 kPa
Hydraulic System
Hydraulic control unit:
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit::
All spool control valves externally mounted beside the hydraulic tank. Variable piston pump with capacity (discharge flow) of 366 ltr/min / 96.7 U.S. gal/min for implement at rated engine rpm.
Relief valve setting . . . for implement 3,980 psi 27.5 MPa 280 kg/cm²
Control valves:
Spool control valves for Semi-U tilt dozer and Full-U tilt dozer.
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
• Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders:
Double-acting, piston		 Number of cylinders: Bore:
Blade lift 2 5.5" / 140 mm
Blade tilt 1 7.1" / 180 mm
Ripper lift 2 7.9" / 200 mm
Ripper tilt 2 7.1" / 180 mm
Hydraulic oil capacity (refill):
Semi-U dozer or U dozer 34.4 U.S. gal 130 ltr
Giant ripper (variable) 11.9 U.S. gal 45 ltr
Multi-shank ripper (variable) 11.9 U.S. gal 45 ltr

A large number of construction industry and warehouse management professionals now look at forklift rentals in Bridger as a clear alternative to the heavy cost of ownership and maintenance issues. Not just in case of temporary demands, renting forklifts may be a viable option even when you need reach or telescopic forklifts for a long duration of time. However, it is in case of short term rentals that you save the most. The bottom line is that you get to choose what you really want.

We have on-board a large number of credible, pre-screened suppliers having ready-to-rent forklifts in Bridger who can provide you with any number of forklifts or accessories on short notice. Yes, the equipment can be made available in as little as one day!

And the good news is that you need not worry about the delivery services, inflexible rental terms or rental duration. You can rent one or more forklifts for just one day or several weeks at a stretch as per the requirements for a task at hand.

Submit a request today by filling up the online contact form and we will match you against the best forklift rentals in close proximity of jobsite or warehouse. You can start talking to representatives of some of the most trusted equipment rental companies within few hours!

A large number of construction industry and warehouse management professionals now look at forklift rentals in Hardin as a clear alternative to the heavy cost of ownership and maintenance issues. Not just in case of temporary demands, renting forklifts may be a viable option even when you need reach or telescopic forklifts for a long duration of time. However, it is in case of short term rentals that you save the most. The bottom line is that you get to choose what you really want.

We have on-board a large number of credible, pre-screened suppliers having ready-to-rent forklifts in Hardin who can provide you with any number of forklifts or accessories on short notice. Yes, the equipment can be made available in as little as one day!

And the good news is that you need not worry about the delivery services, inflexible rental terms or rental duration. You can rent one or more forklifts for just one day or several weeks at a stretch as per the requirements for a task at hand.

Submit a request today by filling up the online contact form and we will match you against the best forklift rentals in close proximity of jobsite or warehouse. You can start talking to representatives of some of the most trusted equipment rental companies within few hours!

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics