Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Grasonville, Maryland

Healthy credit lines, no liabilities on your balance sheet and no binding agreements – these are the top advantages of heavy construction equipment rentals in Grasonville. If you too are keen to rent various equipments for a new or ongoing project for few days, weeks or months at a stretch, we can help!

Call us at our toll free number or submit the contact form (on the right) to get started! With our network of vendors at your service, you will never have to worry about your borrowing power in future.

Once you establish contact, our trusted vendors with inventories of different types of construction equipment and supplies will get in touch with you and learn about your requirements.

From backhoes, bulldozers and crushers to excavators, off-road trucks and other heavy machinery, you can get all kinds of equipment at an affordable price now.

Equipment Rental Grasonville, Construction equipment rental Grasonville, Construction Grasonville, Heavy Equipment Rental Grasonville.

Komatsu Dozers D61PX-23

D61PX-23 Crawler Dozer

The low ground pressure D61PX-23 is fully hydrostatic and comes standard with a parallel link undercarriage system for long undercarriage live. The new hydrostatic transmission pump control technology improves efficiency and reduces fuel consumption by up to 20% in Economy mode. Power mode is also available to push through the tough jobs while still saving up to 10% in fuel consumption over the previous model.

Engine
Model Komatsu SAA6D107E-2*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor  All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross  170 HP 127 kW
(ISO 14396  169 HP 126 kW
ISO 9249 / SAE J1349 - Net 168 HP 125 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph
2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph
3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
Travel speed (variable mode) 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two-stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket teeth for easy displacement.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.
HYDROSTATIC TRANSMISSION (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius (as measured by track marks on the ground at pivot turn.) 91"
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame  Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
Number of track rollers (each side)  8
Type of shoes (standard) Single grouser
Number of shoes (each side) 46
Grouser height 2.3" 57.5 mm
Shoe width (standard 34" 860 mm
Ground contact area 8,451 in² 54520 cm²
Ground pressure
(with dozer, ROPS canopy):
4.87 psi 33.6 kPa
0.34 kgf/cm²
Track gauge  7'0" 2130 mm
Length of track on ground  10'5" 3161 mm
SERVICE REFILL CAPACITIES
Coolant 11.9 U.S. gal 45 ltr
Fuel tank 98.3 U.S. gal 372 ltr
Engine oil 7.2 U.S. gal 27 ltr
Hydraulic tank 26.7 U.S. gal 101 ltr
Final drive (each side) 2.2 U.S. gal 8.1 ltr
Operating Weight (approximate)
Tractor weight Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
D61EX-23 38,581 lb 17500 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
D61EX-23 41,138 lb 18660 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 171 ltr/min / 45 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 280 kg/cm²
27.4MPa
Hydraulic cylinders 3,974
Hydraulic cylinders: Number of cylinders Bore
Blade lift 2 4"
100 mm
Blade tilt 1 5"
120 mm
Blade angle 2 4"
110 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 26.7 U.S. gal 101 ltr
Control valves:
3-spool control valve for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt  Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Komatsu Dozers D61EXI-23

D61EXi-23 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA6D107E-2*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 170 HP 127 kW
(ISO 14396 169 HP 126 kW
ISO 9249 / SAE J1349 - Net 168 HP 125 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph
2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph
3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
Travel speed (variable mode) 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two-stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket teeth for easy displacement.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.
HYDROSTATIC TRANSMISSION (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius (as measured by track marks on the ground at pivot turn.) 83"
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 8
Type of shoes (standard) Single grouser
Number of shoes (each side) 46
Grouser height 2.3" 57.5 mm
Shoe width (standard 34" 860 mm
Ground contact area 8,451 in² 54520 cm²
Ground pressure
(with dozer, ROPS canopy):
4.87 psi 33.6 kPa
0.34 kgf/cm²
Track gauge  7'0" 2130 mm
Length of track on ground 10'5" 3161 mm
SERVICE REFILL CAPACITIES
Coolant 11.9 U.S. gal 45 ltr
Fuel tank 98.3 U.S. gal 372 ltr
Engine oil 7.2 U.S. gal 27 ltr
Hydraulic tank 26.7 U.S. gal 101 ltr
Final drive (each side) 2.2 U.S. gal 8.1 ltr
Operating Weight approximate
Tractor weight Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
D61EX-23 39,264 lb 17810 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
D61EX-23 39,441 lb 17890 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 171 ltr/min / 45 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 280 kg/cm²
27.4MPa
Hydraulic cylinders 3,974
Hydraulic cylinders: Number of cylinders Bore
Blade lift 2 4"
100 mm
Blade tilt 1 5"
120 mm
Blade angle 2 4"
100 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 26.7 U.S. gal 101 ltr
Control valves:
3-spool control valve for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

John Deere Skid Steer 320E
More than flash.
The 320E looks great, but there's substance to its style. The optimized boom design provides improved bucket breakout performance throughout the lift path. You also get more reach at truck bed height and more lift height to the hinge pin. We rerouted the auxiliary hydraulic lines to better protect them and added connect-under-pressure couplers. The engine side shields attach more securely. Automotive-style courtesy lighting can be preset to stay on for up to a 90-second interval before shutting down after the operator exits the machine. How's that for shedding some light on the subject? And there are many new options, such as ride control and keyless start to make your day smoother and more productive. The 320E's engine is certified to EPA Final Tier 4 emissions standards and features automatic cleaning without impacting machine operation in most conditions.

Engine
Emission Rating Tier 4
Engine Make / Engine Model Yanmar / 4TNV98C
Net Power, kW (hp) @ Rated rpm 49.4 (66) @ 2500
Gross power, kW (hp) 51.7 (69)
Net peak torque, N-m (lb-ft) 241 (178)
Displacement, L (cu in) 3.3 (201)
Engine aspiration Naturally Aspirated
Fuel capacity, L (gal) 76 (20)
HYDRAULIC sYSTEM
Standard pump flow, L/min (gpm) 76 (20)
Optional high flow, L/min (gpm) 106 (28)
System pressure, kPa (psi) 22408 (3250)
Hydraulic power, kW (hp) 28.102 (37.6)
Optional high flow hydraulic power, kW (hp) 39.196 (52.5)
PERFORMANCE
SAE rated operating capacity, kg (lb) 994 (2190)
SAE ROC with optional counterweight, kg (lb) 1067 (2350)
Tipping Load, standard, kg (lb) 1989 (4380)
Breakout Force Boom, kN (lb) 15.5 (3500)
Breakout Force Bucket, kN (lb) 26.6 (6000)
Vertical lift geometry Vertical

 

DRIVE TRAIN
Maximum Ground Speed, standard, kph (mph) 11.1 (6.9)
Two Speed Transmission Ground Speed, kph (mph) 17.9 (11.1)
Drive Chain Rating 80
Axle Torque, Nm (lb-ft) 6771 (4994)
Tire size - Standard 12 x 16.5
DIMENSIONS
Length with Bucket, mm (in) 3470 (136.8)
Length without Bucket, mm (in) 2850 (112)
Width without Bucket, mm (in) 1760 (69.2)
Height to ROPS, mm (in) 2020 (79.4)
Height to Hinge Pin, mm (in) 3090 (121.5)
Dump Height, mm (in) 2460 (96.9)
Dump Reach, mm (in) 740 (29)
Dump Angle, degrees 43
Bucket Rollback @ ground, degrees 33
Wheelbase, mm (in) 1130 (44.3)
Ground Clearance, mm (in) 220 (8.5)
Angle of Departure, degrees 28
wEIGHT
SAE Operating weight, kg (lb) 3246 (7150)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics