Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Great Mills, Maryland

Healthy credit lines, no liabilities on your balance sheet and no binding agreements – these are the top advantages of heavy construction equipment rentals in Great Mills. If you too are keen to rent various equipments for a new or ongoing project for few days, weeks or months at a stretch, we can help!

Call us at our toll free number or submit the contact form (on the right) to get started! With our network of vendors at your service, you will never have to worry about your borrowing power in future.

Once you establish contact, our trusted vendors with inventories of different types of construction equipment and supplies will get in touch with you and learn about your requirements.

From backhoes, bulldozers and crushers to excavators, off-road trucks and other heavy machinery, you can get all kinds of equipment at an affordable price now.

Equipment Rental Great Mills, Construction equipment rental Great Mills, Construction Great Mills, Heavy Equipment Rental Great Mills.

JCB Skid Steer Loaders 175

175

The new small platform 1550lb (794kg) rated operating capacity JCB 175 vertical lift skid steer loader incorporates our unique single boom and side entry design. Designed for comfort, safety, economy, productivity and durability in the USA (home of skid steers), the 175's 56hp (42kW) Kohler engine is tried, tested and proven.

The 175 has on average 60% better visibility and a 46% larger cab than competitive models plus a whole host of other benefits, like ergonomic controls, an extremely tough PowerBoom and a low total cost of ownership.

Engine
Net Engine Power 56hp (42kW)
Loader Specification
Bucket Breakout Force 4718lb (2140kg)
Loader Lift Force 3461lb (1570kg)
Rated Operating Capacity - 50% 1750lb (794kg)
Tipping Load 3500lb (1587kg)
Machine Specifications
Engine Model
Gross Horsepower 56hp (42kW)
Gross Torque 165.9lbf (225Nm)
Lift Path Vertical Lift
Operating Weight 6638lb (3011kg)
Visibility 270°
Specifications
Auxiliary Hydraulic Flow 18.5gpm (70lpm)
High Flow 26.4gpm (100lpm)
Main Relief Pressure 3335psi (230bar)
Single Speed 12kph (7.5mph)
Two Speed 9kph (5.6mph) / 18.5kph (11.5mph)
Loader Performance
Operating Capacity 1750lb (794kg)
Operating Weight 6724lb (3050kg)

Komatsu Excavators PC800LC-8 MH
PC800LC-8 MH Material Handler (55'-68' Reach)

If your job calls for a grapple, clam or magnet with a long reach, the PC800LC-8 material handler can provide the right arm and boom combinations you'll need.

Engine
EPA Tier 3 and EU stage 3A emission certified.
Model Komatsu SAA6D140E-5
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed control, electronic
Horsepower:
SAE J1995 (Gross) 496 HP 370 kW
ISO9249 / SAE J1349 (Net) 487 HP 363 kW
Hydraulic fan at maximum speed (Net) 454 HP 338 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Hydraulics System
Type EOLSS (Electronic Open-center Load Sensing System)
Number of selectable working modes 3
Main pump:
Type Two (2) variable capacity piston pumps
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 2 x 130.5 U.S. gal/min 2 x 494 ltr/min
Fan drive pump Variable capacity piston type
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Relief valve setting:
Implement circuits 4,550 psi 31.4 MPa 320 kg/cm²
Travel circuit 4,980 psi 34.3 MPa 350 kg/cm²
Swing circuit 4,120 psi 28.4 MPa 290 kg/cm²
Heavy lift circuit 4,980 psi 34.3 MPa 350 kg/cm²
Pilot circuit 430 psi 2.9 MPa 30 kg/cm²
Hydraulic cylinders / Number of cylinders: bore x stroke x rod diameter bore x stroke x rod diameter
Boom / 2 8" x 68" x 5" 202 mm x 1727 mm x 127 mm
Arm / 1 (55' front) 9" x 72" x 6" 229 mm x 1829 mm x 152 mm
Arm / 1 (68' front) 8.5" x 72" x 6" 216 mm x 1829 mm x 152 mm
Drives & Brakes
Steering control Two levers with pedals
Drive method Fully hydrostatic
Travel motor Axial piston motor, in-shoe design
Reduction system Planetary double reduction
Maximum drawbar pull 125,660 lb 559 kN 57000 kg
Gradeability 70%
Maximum travel speed:
High 2.6 mph 4.2 km/h
Low 1.7 mph 2.8 km/h
Service brake Hydraulic lock
Parking brake Oil disc brake
Swing System
Driven method Hydraulic motors (2)
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Oil disc brake
Swing speed 6.8 rpm
Swing torque 209,461 ft. lbs. 28968 kg•m
Undercarriage
Center frame H-leg frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
No. of shoes 51 each side
No. of carrier rollers 3 each side
No. of track rollers 9 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 258.9 U.S. gal 980 ltr
Radiator 26.4 U.S. gal 100 ltr
Engine 15.3 U.S. gal 58 ltr
Final drive, each side 5.3 U.S. gal 20 ltr
Swing drive 2 x 6.5 U.S. gal 2 x 24.5 ltr
Hydraulic tank 116.2 U.S. gal 440 ltr
Operating Weight (approximate)
Operating weight w/o Grapple: 16.8 m / 87796 kg 55' / 193,555 lb
Operating weight w/o Grapple: 20.7 m / 89339 kg 68' / 196,955 lb

New Holland Skid Steer Loader L216

Skid Steer Loader 216

MORE DIGGING AND PUSHING POWER BY DESIGN
This model features radial-lift boom geometry, with the boom connected directly to the frame for outstanding pushing and excavating power. Maximum reach is achieved at roughly eye level during operation, making it ideal for loading and unloading flatbed trucks and trailers.

Engine
Manufacturer/model ISM / N844LT
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135.2 (2.216)
Fuel injection Indirect
Air intake Turbocharged with external EGR
Horsepower per SAE J1349 Gross hp (kW) 60 (45) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 57 (42) @ 2800 rpm
Peak torque, lb-ft (Nm) 139 (188) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.4 (11.9)
Travel speed, high range (optional),mph (km/h) NA
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 112 (2845)
Top of ROPS, in (mm) 75.5 (1919)
Bottom of level bucket, fully raised,in (mm) 105.6 (2682)
Overall length without attachment with coupler, in (mm) 95.9 (2435)
Dump angle, degrees 40°
Dump reach (max height), in (mm) 18.5 (469)
Rollback, bucket on ground, degrees 26°
Rollback, bucket at full height, degrees 95°
Wheelbase, in (mm) 37 (941)
Ground clearance (bottom of belly pan),in (mm) 7 (178)
Angle of departure, degrees 22°
Clearance circle without bucket, in(mm) 48.7 (1237)
Clearance circle rear, in (mm) 56.4 (1433)
Rear axle to bumper, in (mm) 33.8 (858)
Overall width, in (mm) 59.8 (1518)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 18.4 (69.7)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) -
Performance Specs
Rated operating load, 50% tip, lbs (kg) 1600 (725)
Tipping load, lbs (kg) 3200 (1455)
Breakout force, lift cylinder, lbs (kN) 3310 (14.7)
Breakout force, bucket cylinder, lbs (kN) 5270 (23.4)
Operating weight, lbs (kg) 5510 (2505)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics