Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Brimfield, Massachusetts

Do you need to supplement your core fleet or are in need of a vendor who can provide you with everything from the simplest of construction supplies such as shovels to heaviest of machines such as excavators?

If so, you’ve just landed on the right page. We represent the biggest network of heavy construction equipment rental service providers in the region and no matter how small, big or varied your requirements for construction equipment in Brimfield are, we will comfortably meet them!

We like to exceed the expectations contractors have from us and we’ve been doing that through our premier services for a long time now!

Pick your phone and call the toll free number right away to get started. No obligations attached! You can also fill out the quick online form on the right and we will get in touch with you for a quick discussion at the earliest.

Equipment Rental Brimfield, Construction equipment rental Brimfield, Construction Brimfield, Heavy Equipment Rental Brimfield.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

Articulating Boom Lifts E450A

JLG Articulating Boom Lifts E450A
Key Specs

  • Machine Width: 5 ft 9 in. / 1.75 m
  • Platform Capacity: 500 lb / 226.80 kg
  • Platform Height: 45 ft / 13.72 m

Key Features

  • Versatility - Three platform heights and jib and non-jib options; three chassis widths to fit any workspace; electric or multi-fuel
  • Accessibility - up and over access, optional jib
  • Maneuverability - move over uneven surfaces with the Automatic Traction Control option
  • Productivity - work longer with longer duty cycles
  • Environmentally friendly - zero emissions
Power Source
Batteries 8 x 6V, 370 amp-hr
Electrical System 48 Volts DC
Performance
Drive Speed - Platform Lowered 3 mph / 5.15 km/h
Gradeability - 2WD 30 %
Platform Capacity 500 lb / 226.80 kg
Platform Capacity - Unrestricted 500 lb / 226.80 kg
Swing 360 Degrees
Swing Type Non-Continuous
Turning Radius - Outside 10 ft 4 in. / 3.15 m
Dimensional Data
Ground Clearance 9 in. / 0.22 m
Machine Height 6 ft 6 in. / 1.98 m
Machine Length 19 ft 1 in. / 5.82 m
Machine Width 5 ft 9 in. / 1.75 m
Platform Dimension A 2 ft 6 in. / 0.76 m
Platform Dimension B 5 ft / 1.52 m
Platform Height 45 ft / 13.72 m
Tailswing Zero
Tire Size 240/55-17.5 Pnuematic
Wheelbase 6 ft 7 in. / 2.01 m
Reach Specifications
Horizontal Jib Rotation 0 Degrees
Horizontal Outreach 23 ft 1 in. / 7.04 m
Platform Height 45 ft / 13.72 m
Up and Over Height 24 ft 7 in. / 7.49 m
Vertical Jib Rotation 0 Degrees
General
Capacity - Hydraulic Reservoir 4 gal. / 15.14 L
Machine Weight 12600 lb / 5715.26 kg

Komatsu Wheel Loaders WA500-7 Steel Mill
WA500-7 Steel Mill Wheel Loader

The Komatsu-integrated design found in this loader offers class leading value, reliability and versatility. Hydraulics, power train, frame and all other major components are engineered by Komatsu. You get a machine whose components are designed to work together for higher production and reliability. The integrated design also provides the strong frame and component foundation to allow a 2nd or even 3rd life after rebuilding. Now add the Komatsu designed Steel Mill Arrangement with guarding and heat protection specifically matched to the WA500-7 and you have a loader that handles hot slag and stays working longer for increased productivity.

Engine
Model Komatsu SAA6D140E-6*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 357 HP 266 kW
ISO 9249/SAE J1349 / Net 353 HP 263 kW
Rated rpm 1900 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-powershift, planetary type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.7 mph
7.5 km/h
5.3 mph
8.5 km/h
2nd gear 8.0 mph
12.9 km/h
8.0 mph
12.9 km/h
2nd gear (Lock-up clutch ON) 8.1 mph
13.1 km/h
8.1 mph
13.0 km/h
3rd gear 13.8 mph
22.2 km/h
15.3 mph
24.7 km/h
3rd gear (Lock-up clutch ON) 14.7 mph
23.7 km/h
16.5 mph
26.6 km/h
4th gear 22.1 mph
35.5 km/h
23.6 mph
38.0 km/h
4th gear (Lock-up clutch ON) 23.2 mph
37.3 km/h
23.6 mph
38.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 24° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 36° (40° to max end stop)
Minimum turning radius at the center of outside tire 23' 2" 7050 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 31.7 U.S. gal/min 120 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.9" x 19.1" 100 mm x 486 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 84.8 U.S gal/min 320 ltr/min
Relief valve setting 4,980 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Boom cylinder / 2 6.3" x 35.4" 160 mm x 898 mm
Bucket cylinder / 1 7.3" x 26.6" 185 mm x 675 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket)
Raise 7.2 sec
Dump 1.7 sec
Lower (Empty) 4.2 sec
Service Refill Capacities
Cooling system 35.1 U.S. gal 133 ltr
Fuel tank 124.9 U.S. gal 473 ltr
Engine 9.8 U.S. gal 37 ltr
Hydraulic system 89.0 U.S. gal 337 ltr
Axle (each front and rear) 25.1 U.S. gal 95 ltr
Torque converter and transmission 18.8 U.S. gal 71 ltr

John Deere Wheel Loader 724K High-Lift Interim Tier 4
ThinK. Big.

Serious productivity demands serious thinking. Many of the numerous improvements in the 724K came from the brightest minds in the industry - loader owners and users such as yourself. Armed with fresh insights from this Customer Advocate Group, we enlarged the cab, redesigned the cooling, enhanced the hydraulics, refined the ergonomics, and offered even more options. All with the goal of increasing productivity and uptime, while lowering daily operating costs. Owners, operators, and maintenance personnel will all benefit from the big ideas found in the 724K Loader.

ENGINE
Engine Make / Engine Model John Deere / Powertech PVX 6090
Emission Rating Interim Tier 4
Net Power, kW (hp) @ Rated rpm 197 (264) @ 1800
Displacement, L (cu in) 9 (548)
Net Peak Torque, N-m (lb-ft) 1161 (856)
Calculated % Torque Rise 61
ELECTRICAL
Voltage 24
Alternator amps 100
TRANSMISSION
Type Powershift
Max. Travel Speed - fwd, kph (mph) 40 (24.9)
Max. Travel Speed - rev, kph (mph) 28.8 (17.9)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Wet Multi Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 310 (82)
System Pressure, kPa (psi) 25166 (3650)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 3.1 (4)
Bucket Capacity Max., cu m (cu yd) 3.6 (4.75)
Breakout Force, Std Bucket, kN (lb) 127.1 (28590)
Ride Control Optional
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 3.6 (4.75)
Tire Size Standard 23.5 R25
TIPPING LOAD
Straight, kg (lb) 13087 (28851)
Full Turn, kg (lb) 11222 (24740)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4540 (14 ft 11 in)
Dump Clear @ 45 deg, mm (ft in) 3260 (10 ft 8 in)
Reach @ 7', mm (ft in) 2120 (7 ft )
Reach @ Full Height, mm (ft in) 1250 (4 ft 1 in)
Wheelbase, mm (ft in) 3260 (10 ft 8 in)
Clearance Circle, mm (ft in) 13720 (45 ft )
Overall Length, mm (ft in) 8780 (28 ft 10 in)
Height to Top of Cab, mm (ft in) 3430 (11 ft 3 in)
Ground Clearance, mm (in) 461 (18.1)
CAPACITIES
Fuel Tank, L (gal) 397 (105)
Hydraulic Reservoir, L (gal) 110 (29)
WEIGHT
SAE Operating Weight, kg (lb) 19486 (42947)
Metric Ton Weight, kg (lb) 19.486 (42.947)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics