Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Buzzards Bay, Massachusetts

Do you need to supplement your core fleet or are in need of a vendor who can provide you with everything from the simplest of construction supplies such as shovels to heaviest of machines such as excavators?

If so, you’ve just landed on the right page. We represent the biggest network of heavy construction equipment rental service providers in the region and no matter how small, big or varied your requirements for construction equipment in Buzzards Bay are, we will comfortably meet them!

We like to exceed the expectations contractors have from us and we’ve been doing that through our premier services for a long time now!

Pick your phone and call the toll free number right away to get started. No obligations attached! You can also fill out the quick online form on the right and we will get in touch with you for a quick discussion at the earliest.

Equipment Rental Buzzards Bay, Construction equipment rental Buzzards Bay, Construction Buzzards Bay, Heavy Equipment Rental Buzzards Bay.

Unable to parse entered address. API response code: REQUEST_DENIED

John Deere Scraper Systems 1510C
1510C
The 1510C Carry-All Scraper is a four-tire scraper that carries 15 cu yd of material and has a 10-ft cut width. This scraper works well for construction contractors who use 225-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 11 cu yd
Heaped capacity cubic yards 15 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 24 ft 10 in. 7569 mm
Width, ft, in. (mm) 11 ft 10 in. 3607 mm
Height, ft, in. (mm) 7 ft 6 in. 2286 mm
Bucket dimensions --
Length, ft, in. (mm) 7 ft 8 in. 2337 mm
Width, ft, in. (mm) 10 ft 0 in. 3048 mm
Height, ft, in. (mm) 3 ft 10 in. 1168 mm
WEIGHT
Approximate shipping weight, lb (kg) 16,800 lb 7620 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 28% PTO hp
Wheels 72%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 17.5 X 25
Option 1 20.5 X 25
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 200 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard, 3 piece blades
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Not Approved
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Factory Installed Only
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

JCB Light Equipment VMP 14

VMP 14

The JCB VMP 14 reversible plate compactor is heavier, wider and more powerful than the VMP 8. It's still hydrostatically operated and designed for use on granular and cohesive material. The VMP 14 weighs 135 kg (68% more) and power is provided by a 3.1 kW Hatz engine. Working width is 425 mm and centrifugal force is 56% improved at 25 kN.

There are reversing and stationary features for confined areas and all directional control is lever-operated. The engine is shock-mounted and vibrator bearings are lifetime-lubricated for durability. Added to that is a wear-resistant, high-grade cast damping plate and a roll cage that doubles as a lifting bail.

For operator comfort, specially balanced and isolated guide bars protect hands and arms from excessive vibrations. Finally, there's a built-in device for attaching a vulcolan paving mat (an optional extra item for compacting paving stones and similar material).

Compaction Performance
Operating Weight 135kg
Plate Width 425mm
Engine
Maximum Engine Power 3.1kW

JCB Light Equipment VMP 8

VMP 8

The JCB VMP 8 reversible plate compactor is hydrostatically operated and designed for use on granular and cohesive material. It weighs 80 kg and power is provided by a 2.9 kW Honda engine. Working width is 325 mm and centrifugal force is 16 kN.

There are reversing and stationary features for confined areas and all directional control is lever-operated. The engine is shock-mounted and vibrator bearings are lifetime-lubricated for durability. Added to that is a wear-resistant, high-grade cast damping plate and a roll cage that doubles as a lifting bail.

For operator comfort, specially balanced and isolated guide bars protect hands and arms from excessive vibrations. Finally, there's a built-in device for attaching a vulcolan paving mat (an optional extra item for compacting paving stones and similar material).

Compaction Performance
Operating Weight 80kg
Plate Width 325mm
Engine
Maximum Engine Power 3.1kW

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics