Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Drury, Massachusetts

Do you need to supplement your core fleet or are in need of a vendor who can provide you with everything from the simplest of construction supplies such as shovels to heaviest of machines such as excavators?

If so, you’ve just landed on the right page. We represent the biggest network of heavy construction equipment rental service providers in the region and no matter how small, big or varied your requirements for construction equipment in Drury are, we will comfortably meet them!

We like to exceed the expectations contractors have from us and we’ve been doing that through our premier services for a long time now!

Pick your phone and call the toll free number right away to get started. No obligations attached! You can also fill out the quick online form on the right and we will get in touch with you for a quick discussion at the earliest.

Equipment Rental Drury, Construction equipment rental Drury, Construction Drury, Heavy Equipment Rental Drury.

Driveable Stock Picker 15MSP

JLG Driveable Stock Picker 15MSP

Key Specs

  • Machine Width: 2 ft 6 in. / 0.75 m
  • Platform Height:15 ft 3 in. / 4.65 m

Key Features

  • Zero turning radius for superior maneuverability
  • Built-in automatic charger for less downtime on the job
  • One-hand operation for increased operator comfort
  • Driveable at full height for increased efficiency
Dimensional Data
Wheel Size - Front Caster 8 x 2.5"
Ground Clearance 2 in. / 0.05 m
Ground Entry Height 1 ft 6 in. / 0.46 m
Machine Height 6 ft 6 in. / 1.98 m
Machine Length 4 ft 6 in. / 1.36 m
Machine Width 2 ft 6 in. / 0.75 m
Platform Dimension A 4 ft / 1.22 m
Platform Dimension B 2 ft 4 in. / 0.71 m
Platform Height 15 ft 3 in. / 4.65 m
Wheel SIze - Rear 12.62 x 4"
Reach Specifications
Platform Height 15 ft 3 in. / 4.65 m
Working Height 21 ft 3 in. / 6.48 m
Performance
Drive Speed - Platform Elevated 0.60 mph / 0.97 km/h
Drive Speed - Platform Lowered 4 mph / 5.63 km/h
Drive System 4 Brush Direct Electric
Gradeability 20 %
Maximum Drive Height 15 ft 3 in. / 4.65 m
Maximum Lift Height 15 ft / 4.65 m
Platform Capacity 500 lb / 226.80 kg
General
Machine Weight 2425 lb / 1099.96 kg
Power Source
Batteries 2 Sealed 100 amp-hr Glass Mat (AGM)

John Deere Scraper Systems 9520RT
9520RT
Why walk when you can run? The New 9RT Series Tractors are built to defy convention. With more engine horsepower (470 - 570 engine hp) and efficient FT4 engine technology, these machines welcome a good challenge. Just when you think there isn't any room for more, we outfitted the 9RT's with the new CommandViewTM III cab. It delivers more space, comfort and convenience than before, with a few features you might not expect. A new and improved e18TM Transmission with Efficiency Manager also adds to the appeal by providing the smoothest shifting power shift in the market, with an additional automatic mode. Get ready run!

FEATURES & SPECS

  • John Deere PowerTechTM 13.5L PSS
  • New and improved e18TM PowerShift Transmission
  • AirCushion Suspension System
  • New CommandViewTM III cab
Horsepower: 520 engine hp
Hydraulic Capacity: 115 U.S. gpm (435 L/min) standard
Drawbar Support: Available for long or short scraper drawbars

John Deere Scraper Systems 1812C
1812C
The 1812C Carry-All Scraper is a four-tire scraper that carries 18 cu yd of material and has a 12-ft cut width. This scraper works well for construction contractors bulk-hauling materials using 360-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 14 cu yd
Heaped capacity cubic yards 18 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 24 ft 10 in. 7569 mm
Width, ft, in. (mm) 13 ft 10 in. 4216 mm
Height, ft, in. (mm) 7 ft 6 in. 2286 mm
Bucket dimensions --
Length, ft, in. (mm) 7 ft 8 in. 2337 mm
Width, ft, in. (mm) 12 ft 0 in. 3658 mm
Height, ft, in. (mm) 3 ft 10 in. 1168 mm
WEIGHT
Approximate shipping weight, lb (kg) 18,950 lb 8595 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 28%
Wheels 72%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 20.5 X 25
Option 1 NA
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 360 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard, 3 piece blades
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Not Approved
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Factory Installed Only
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics