Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Argyle, Michigan

You need not go all out with a construction equipment rental model but it is true that renting heavy construction equipment does provide you with significant borrowing power by improving your assets to liabilities ratio.

So, even if you have your core fleet ready, it makes sense to supplement it with necessary machinery available on rent. Since rental services in Argyle are a lot more flexible than leasing any day, especially in terms of the length of contract, you can strike the right balance between buying, leasing and renting construction equipment.

If you have made up your mind to avail heavy construction equipment rental services, we can assist you in finding the most trusted and responsive vendors in Argyle.

You can gain access to our network of established and reliable vendors any day. You just have to submit the online contact form (on the right). You can also make a quick call on our toll free number anytime.

Equipment Rental Argyle, Construction equipment rental Argyle, Construction Argyle, Heavy Equipment Rental Argyle.

cat lift pneumatic tire 2epc6000

The 2EPC5000-2EP6500 Series of 80-volt four-wheel electric pneumatic tire lift trucks provides maximum performance in a variety of applications due to advanced AC technology and operator-friendly controls. The 2EPC5000-2EP6500 Series provides all the benefits of an electric forklift, including elimination of harmful emissions and reduced maintenance costs, while still delivering performance similar to or better than an Internal Combustion (IC) forklift.

Quality

Quality

  • Standard fingertip hydraulic controls offer fast and precise handling; a travel directional switch and horn are conveniently integrated into the lift trucks' fingertip module
  • Easy-to-read, dash mounted display includes informative service icons, directional indicators and performance modes
  • Improved visibility in all directions due to the mast, overhead guard and counterweight design
  • Designed to maximize operator comfort and minimize fatigue:
    • Solid pneumatic tires, full-suspension seat and floating cab design help reduce shock and vibration
    • Steering column allows for ample leg room, with fully-adjustable tilt and telescope
    • Anti-cinch seat belt permits the operator to turn easily when travelling in reverse on the lift truck

Available Options

  • Joystick control
  • Enclosed operator cab
  • Multitude of light and strobe packages to suit your application
specs
MODEL Model Capacity (lbs.) Voltage (V) Max Travel Speed* (mph) Turning Radius(in.) Right Angle Stack* (in.) Lift Speed* (fpm) Lower Speed* (fpm) Length (in.) Width (in.) Height (in.) Weight (lbs.)
2EPC6000 6000 80 10.6 78.7 95.7 108.3  114.2 90.6  47.2 88.2 11,530

Komatsu Dozers D375A-6
D375A-6 Crawler Dozer

The D375A-6 is a great combination of power and balance; power for digging and pushing, balance for stability on slopes and for ripping. Giant or multi-shank rippers are available as is a wide lighting and maintenance options specifically designed for the demands of the mining industry. A lock-up torque converter lets the D375A-6 to shift into direct drive when pushing to increase speed and production.

Engine
Model Komatsu SAA6D170E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1,413 in³ 23.15 ltr
Governor All-speed and mid-range, electronic
Horsepower:
SAE J1995 - Gross 636 HP 474 kW
ISO 9249/SAE J1349 - Net 610 HP 455 kW
Hydraulic fan at maximum speed - Net 580 HP 433 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear Forward Reverse
1st 2.2 mph 3.5 km/h 2.9 mph 4.6 km/h
2nd 4.2 mph 6.8 km/h 5.5 mph 8.9 km/h
3rd L 5.0 mph 8.0 km/h 6.0 mph 9.7 km/h
3rd 7.3 mph 11.8 km/h 9.8 mph 15.8 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
Steering System
PCCS, joystick controlled, wet multiple-disc steering clutches are spring-loaded and hydraulically released.Wet multiple-disc, pedal/lever controlled steering brakes are spring-actuated hydraulically released and require no adjustment. Steering clutches and brakes are interconnected for easy, responsive steering.
Minimum turning radius 13'9" 4.2 m
Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Cylindrical, high-tensile-strength steel construction
Rollers and idlers Lubricated track rollers
K-Bogie undercarriage Lubricated track rollers are resiliently mounted to the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.
Extreme service track shoes Lubricated tracks. Unique seals prevent entry of foreign abrasives into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
Number of shoes (each side) 41
Grouser height:
Single grouser 3.7" 93 mm
Shoe width (standard) 24" 610 mm
Ground contact area 7,527 in² 48560 cm²
Ground pressure (tractor) 15.6 psi 108 kPa / 1.10 kg/cm²
Number of track rollers 8
Number of carrier rollers 2
Extreme service shoes: Ground contact area: Ground** pressure:
24'' / 610 mm Additional weight - 0 lb / 0 kg 7,527 in² 48560 cm² 21.0 psi 1.48 kgf/cm² / 145 kPa
28'' / 710 mm Additional weight - 1,500 lb / 680 kg 8,760 in² 56520 cm² 18.2 psi 1.28 kgf/cm² / 126 kPa
32'' / 810 mm Additional weight - 3,000 lb / 1360 kg 9,990 in² 64480 cm² 16.0 psi 1.13 kgf/cm² / 111 kPa
** Ground pressure based on tractor, Semi-U tilt dozer, giant ripper, cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
Coolant and Lubricant Capacity (refill)
Fuel tank 317.0 U.S. gal 1200 ltr
Coolant 31.7 U.S. gal 120 ltr
Engine 22.7 U.S. gal 86 ltr
Torque converter, transmission, bevel gear, and steering system 39.6 U.S. gal 150 ltr
Final drive (each side) 17.1 U.S. gal 65 ltr
Operating Weight
Tractor weight Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 117,290 lb 53200 kg
Including Semi-U tilt dozer, giant ripper, cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 157,940 lb 71640 kg
Ground pressure 21.0 psi 1.48 kg/cm² / 145 kPa
Hydraulic System
Hydraulic control unit:
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit::
All spool control valves externally mounted beside the hydraulic tank. Variable piston pump with capacity (discharge flow) of 366 ltr/min / 96.7 U.S. gal/min for implement at rated engine rpm.
Relief valve setting . . . for implement 3,980 psi 27.5 MPa 280 kg/cm²
Control valves:
Spool control valves for Semi-U tilt dozer and Full-U tilt dozer.
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
• Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders:
Double-acting, piston
Number of cylinders: Bore:
Blade lift 2 5.5" / 140 mm
Blade tilt 1 7.1" / 180 mm
Ripper lift 2 7.9" / 200 mm
Ripper tilt 2 7.1" / 180 mm
Hydraulic oil capacity (refill):
Semi-U dozer or U dozer 34.4 U.S. gal 130 ltr
Giant ripper (variable) 11.9 U.S. gal 45 ltr
Multi-shank ripper (variable) 11.9 U.S. gal 45 ltr

Komatsu Dozers D37PX-23
D37PX-23 Crawler Dozer
The D37PX-23 has all the great features of all small Komatsu dozers such as the super slant design and hydrostatic drivetrain but it also has the addition of a wider track to accommodate wider track shoes for better floatation and lower ground pressure. The wider base also gives the D37PX-23 a bigger platform to work off of which makes it an even better grading tractor. And new Power and Economy working modes allow the operator to adjust his machine's performance to his current job and save on fuel consumption as he's doing it. You can mount a grade control system to further improve the fine grading capability to make the D37PX-23 a fast and precise grading system.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 91 HP 68 kW
(ISO 14396 89 HP 66 kW
ISO 9249 / SAE J1349 - Net 79 HP 59 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius* 87" 2.2 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid track frame
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Unique seals minimize the entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with a grease gun.
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Tractor for inside mounted blade (PAT)
Number of track rollers (each side) 6
Number of carrier rollers (each side) 1
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 1.9" 47 mm
Shoe width (standard) 24" 600 mm
Ground contact area 4,148 in² 26760 cm²
Ground pressure
(with standard shoe)
4.67 psi 0.33 kgf/cm² / 32.2 kPa
Track gauge 5'7" 1710 mm
Length of track on ground 7'4" 2230 mm
Link pitch 6.1" 154 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 16.9 U.S. gal 64 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 16,314 lb 7600 kg
Operating weight: Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 19,357 lb 8780 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min / 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.0" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics