Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in De Tour Village, Michigan

You need not go all out with a construction equipment rental model but it is true that renting heavy construction equipment does provide you with significant borrowing power by improving your assets to liabilities ratio.

So, even if you have your core fleet ready, it makes sense to supplement it with necessary machinery available on rent. Since rental services in De Tour Village are a lot more flexible than leasing any day, especially in terms of the length of contract, you can strike the right balance between buying, leasing and renting construction equipment.

If you have made up your mind to avail heavy construction equipment rental services, we can assist you in finding the most trusted and responsive vendors in De Tour Village.

You can gain access to our network of established and reliable vendors any day. You just have to submit the online contact form (on the right). You can also make a quick call on our toll free number anytime.

Equipment Rental De Tour Village, Construction equipment rental De Tour Village, Construction De Tour Village, Heavy Equipment Rental De Tour Village.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

New Holland Skid Steer Loader L220

New Holland Skid Steer Loader L220
THE SUPER BOOM® ADVANTAGE
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model ISM / N844LTA
Bore/stroke, in (mm) 3.31 x 3.94 (84 x 100)
Displacement, in3 (L) 135 (2.2)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp (kW) 67 (50) @ 2800 rpm
Horsepower per SAE J1349 Net hp (kW) 64 (47.7) @ 2800 rpm
Peak torque, lb-ft (Nm) 153 (208) @ 1800 rpm
Power Train
Travel speed, low range, mph (km/h) 7.8 (12.5)
Travel speed, high range (optional),mph (km/h) 11.4 (18.3)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 121 (3073)
Top of ROPS, in (mm) 78.7 (1998)
Bottom of level bucket, fully raised,in (mm) 114.3 (2902)
Overall length without attachment with coupler, in (mm) 105.7 (2697)
Dump angle, degrees 52°
Dump reach (max height), in (mm) 29.8 (758)
Rollback, bucket on ground, degrees 34°
Rollback, bucket at full height, degrees 88°
Wheelbase, in (mm) 44.4 (1128)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 25°
Clearance circle without bucket, in(mm) 50.7 (1289)
Clearance circle rear, in (mm) 62.9 (1599)
Rear axle to bumper, in (mm) 36.4 (924)
Overall width, in (mm) 69.1 (1755)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 20.6 (78)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 30.7 (116.2)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2000 (905)
Tipping load, lbs (kg) 4000 (1814)
Breakout force, lift cylinder, lbs (kN) 3450 (15.3)
Breakout force, bucket cylinder, lbs (kN) 7300 (32.5)
Operating weight, lbs (kg) 6470 (2930)

New Holland Skid Steer Loader L225

New Holland Skid Steer Loader L225
THE SUPER BOOM® ADVANTAGE
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model FPT / F5H FL413
Bore/stroke, in (mm) 3.9 x 4.1 (99 x 110)
Displacement, in3 (L) 195 (3.2)
Fuel injection HPCR Direct
Air intake Turbocharged with external CEGR
Horsepower per SAE J1349 Gross hp (kW) 82 (61) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW) 76 (57) @ 2500 rpm
Peak torque, lb-ft (Nm) 257 (349) @ 1400 rpm
Power Train
Travel speed, low range, mph (km/h) 7.0 (11.3)
Travel speed, high range (optional),mph (km/h) 10.5 (16.9)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 129.4 (3287)
Top of ROPS, in (mm) 78.8 (2002)
Bottom of level bucket, fully raised,in (mm) 122.6 (3115)
Overall length without attachment with coupler, in (mm) 117.8 (2993)
Dump angle, degrees 55°
Dump reach (max height), in (mm) 32.3 (821)
Rollback, bucket on ground, degrees 34°
Rollback, bucket at full height, degrees 85°
Wheelbase, in (mm) 52 (1322)
Ground clearance (bottom of belly pan),in (mm) 8 (203)
Angle of departure, degrees 24°
Clearance circle without bucket, in(mm) 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Rear axle to bumper, in (mm) 40.7 (1034)
Overall width, in (mm) 69.6 (1768)
Hydraulic System
Pump flow, Standard Flow, gpm (Lpm) 24.2 (91.5)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 2500 (1135)
Tipping load, lbs (kg) 5000 (2268)
Breakout force, lift cylinder, lbs (kN) 5080 (22.6)
Breakout force, bucket cylinder, lbs (kN) 8620 (38.3)
Operating weight, lbs (kg) 7900 (3580)

John Deere Scraper Systems 2112C
2112C
The 2112C Carry-All Scraper is the largest of the carry-all scraper family. Designed specifically for construction applications, this beast holds 21 cu yd and features a 12-ft cut width. The 2112C Carry-All Scraper is a four-tire scraper that works well for construction contractors who use 425-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 14 cu yd
Heaped capacity cubic yards 21.5 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 29 ft 10 in. 9093 mm
Width, ft, in. (mm) 13 ft 9 in. 4191 mm
Height, ft, in. (mm) 8 ft 0 in. 2438 mm
Bucket dimensions --
Length, ft, in. (mm) 8 ft 10 in. 2692 mm
Width, ft, in. (mm) 12 ft 0 in. 3658 mm
Height, ft, in. (mm) 3 ft 10 in. 1168 mm
WEIGHT
Approximate shipping weight, lb (kg) 25,300 lb 11,475 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 28%
Wheels 74%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 23.5 X 25
Option 1 26.5 X 25
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 450 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard, 3 piece blades
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Not Approved
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Factory Installed Only
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics