Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Algoma, Mississippi

If you are on the lookout for vendors who can supply heavy construction equipment for a new or ongoing project in Porterville, contact us and we will set you up in as little as one day!

Yes, getting started is easy. You just have to dial our toll free number or submit the contact form on the right.

Once we learn about the heavy machinery or tools you need at the construction site, we will put you in touch with trusted vendors offering construction equipment rentals in Algoma. You need not worry about the transportation of equipment/tools to the jobsite (even if it is to be one on a short notice).

When you are on a deadline, look no further than our reliable network of equipment vendors for one click or one phone-call access to all kinds of construction tools and machines.

Equipment Rental Algoma, Construction equipment rental Algoma, Construction Algoma, Heavy Equipment Rental Algoma.

Komatsu Wheel Loaders WD600-6
WD600-6 Wheel Dozer

High productivity is the story of the WD600-6 wheeled dozer. The operator has two engine power modes, load sensing hydraulics and a modulated clutch system to harness the 527 horsepower to maximize production when moving mass quantities of soil, coal, chips, slurry or whatever gets in the way.

Engine
Model Komatsu SAA6D170E-5*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAEJ1995 - Gross 530 HP 396 kW
ISO 9249 / SAEJ1349 - Net 527 HP 393 kW
Hydraulic fan at maximum speed - Net 502 HP 374 kW
Rated rpm 1800 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
EPA Tier 3 and EU stage 3A emissions certified.
Transmission
Torque converter:
Type 3-element, single-stage, double-phase
Transmission:
Type Full-powershift, planetary type
Travel speed Measured with 35/65-33 tires
Speed: Forward
(Lock-up clutch ON)
Reverse
1st 4.2 mph
6.7 km/h
4.5 mph
7.3 km/h
2nd 7.3 mph
11.7 km/h(7.7 mph
12.4 km/h)
8.0mph
12.8 km/h
3rd 12.6 mph
20.3 km/h(13.5 mph
21.7 km/h)
13.7 mph
22.0 km/h
4th 20.5 mph
33.0 km/h(23.4 mph
37.7 km/h)
22.4 mph
36.0 km/h
Axles and Final Drives
Drive system Four-wheel drive.
Front Fixed, full-floating.
Rear Center-pin support, full-floating, 26° total oscillation.
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 43° each direction.
Minimum turning radius at the center of outside tire 23'3" 7075 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 43.1 U.S. gal/min 163 ltr/min
Relief valve setting 4,980 psi 34.3 MPa
350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 5.1" x 20" 130 mm x 510 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 47.6 + 47.6 U.S. gal/min 180 + 180 ltr/min
Relief valve setting 3,560 psi 24.5 MPa 250 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Blade lift - 1 6.3" x 42.5" 160 mm x 1080 mm
Tilt and pitch - 2 7.0" x 9.3" 180 mm x 237 mm
Control valve 3-spool type
Control positions:
Blade lift Raise, hold, lower, and float
Tilt and pitch Tilt-left, tilt-right, hold, pitch forward and back
Hydraulic cycle time
Raise 2.0 sec
Lower 1.3 sec
Tilt (left / right) 0.8 / 1.1 sec
Pitch (front / rear)mage 2.1 / 1.6 sec
Service Refill Capacities
Cooling system 38.8 U.S. gal 147 ltr
Fuel tank 189.7 U.S. gal 718 ltr
Engine 22.7 U.S. gal 86 ltr
Hydraulic system 117.0 U.S. gal 443 ltr
Axle:
Front 41.0 U.S. gal 155 ltr
Rear 41.0 U.S. gal 155 ltr
Torque converter and transmission 21.9 U.S. gal 83 ltr

John Deere Scraper Systems 1810E
1810E
The 1810E Ejector Scraper is a four-tire scraper that carries 18 cu yd of material and has a 10-ft cutting width. This scraper works well for bulk-hauling construction contractors needing a narrow transport scraper. The 1810E requires at least 360 hp to pull in single, tandem, or triple scraper formation.

CAPACITY
Struck capacity cubic yards 12.5 cu yd
Heaped capacity cubic yards 18.3 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 29 ft 8 in. 9042 mm
Width, ft, in. (mm) 11 ft 3632 mm
Height, ft, in. (mm) 6 ft 7 in. 2007 mm
Bucket dimensions --
Length, ft, in. (mm) 9 ft 2 in. 2794 mm
Width, ft, in. (mm) 10 ft 6 in. 3200 mm
Height, ft, in. (mm) 4 ft 1321 mm
WEIGHT
Approximate shipping weight, lb (kg) 22,500 lb 10,205 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 26%
Wheels 74%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 20.5 X 25
Option 1 NA
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 360 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Yes
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Optional
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads Yes

Komatsu Wheel Loaders WA500-7 Steel Mill
WA500-7 Steel Mill Wheel Loader

The Komatsu-integrated design found in this loader offers class leading value, reliability and versatility. Hydraulics, power train, frame and all other major components are engineered by Komatsu. You get a machine whose components are designed to work together for higher production and reliability. The integrated design also provides the strong frame and component foundation to allow a 2nd or even 3rd life after rebuilding. Now add the Komatsu designed Steel Mill Arrangement with guarding and heat protection specifically matched to the WA500-7 and you have a loader that handles hot slag and stays working longer for increased productivity.

Engine
Model Komatsu SAA6D140E-6*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 357 HP 266 kW
ISO 9249/SAE J1349 / Net 353 HP 263 kW
Rated rpm 1900 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-powershift, planetary type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.7 mph
7.5 km/h
5.3 mph
8.5 km/h
2nd gear 8.0 mph
12.9 km/h
8.0 mph
12.9 km/h
2nd gear (Lock-up clutch ON) 8.1 mph
13.1 km/h
8.1 mph
13.0 km/h
3rd gear 13.8 mph
22.2 km/h
15.3 mph
24.7 km/h
3rd gear (Lock-up clutch ON) 14.7 mph
23.7 km/h
16.5 mph
26.6 km/h
4th gear 22.1 mph
35.5 km/h
23.6 mph
38.0 km/h
4th gear (Lock-up clutch ON) 23.2 mph
37.3 km/h
23.6 mph
38.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 24° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 36° (40° to max end stop)
Minimum turning radius at the center of outside tire 23' 2" 7050 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 31.7 U.S. gal/min 120 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.9" x 19.1" 100 mm x 486 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 84.8 U.S gal/min 320 ltr/min
Relief valve setting 4,980 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Boom cylinder / 2 6.3" x 35.4" 160 mm x 898 mm
Bucket cylinder / 1 7.3" x 26.6" 185 mm x 675 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket)
Raise 7.2 sec
Dump 1.7 sec
Lower (Empty) 4.2 sec
Service Refill Capacities
Cooling system 35.1 U.S. gal 133 ltr
Fuel tank 124.9 U.S. gal 473 ltr
Engine 9.8 U.S. gal 37 ltr
Hydraulic system 89.0 U.S. gal 337 ltr
Axle (each front and rear) 25.1 U.S. gal 95 ltr
Torque converter and transmission 18.8 U.S. gal 71 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics