Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Chatawa, Mississippi

If you are on the lookout for vendors who can supply heavy construction equipment for a new or ongoing project in Porterville, contact us and we will set you up in as little as one day!

Yes, getting started is easy. You just have to dial our toll free number or submit the contact form on the right.

Once we learn about the heavy machinery or tools you need at the construction site, we will put you in touch with trusted vendors offering construction equipment rentals in Chatawa. You need not worry about the transportation of equipment/tools to the jobsite (even if it is to be one on a short notice).

When you are on a deadline, look no further than our reliable network of equipment vendors for one click or one phone-call access to all kinds of construction tools and machines.

Equipment Rental Chatawa, Construction equipment rental Chatawa, Construction Chatawa, Heavy Equipment Rental Chatawa.

A large number of construction industry and warehouse management professionals now look at forklift rentals in Laie as a clear alternative to the heavy cost of ownership and maintenance issues. Not just in case of temporary demands, renting forklifts may be a viable option even when you need reach or telescopic forklifts for a long duration of time. However, it is in case of short term rentals that you save the most. The bottom line is that you get to choose what you really want.

We have on-board a large number of credible, pre-screened suppliers having ready-to-rent forklifts in Laie who can provide you with any number of forklifts or accessories on short notice. Yes, the equipment can be made available in as little as one day!

And the good news is that you need not worry about the delivery services, inflexible rental terms or rental duration. You can rent one or more forklifts for just one day or several weeks at a stretch as per the requirements for a task at hand.

Submit a request today by filling up the online contact form and we will match you against the best forklift rentals in close proximity of jobsite or warehouse. You can start talking to representatives of some of the most trusted equipment rental companies within few hours!

Komatsu Dozers D65PX-17 WH

D65PX-17 WH Waste Handling Dozer

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110 mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

 Komatsu Dozer D85EX-15
D85EX-15
Hydrostatic steering makes the D85EX-15 very maneuverable for such a large, powerful dozer. Palm command controls for travel and equipment give the operator the precise control of a small dozer with the pushing power of a high production dozer.

Engine
Model Komatsu SAA6D125E-5
Type 4-cycle, water-cooled, direct injection
Aspiration 100 in³ Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.92" x 5.9" 125 mm x 150 mm
Piston displacement 674 in³ 11.04 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 266 HP 199 kW
ISO 9249 / SAE J1349* / Net 240HP 179 kW
Hydraulic fan at maximum speed / Net 240 HP 179 kW
Rated rpm 1900 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
EPA Tier 3 and EU stage 3A emissions certified.
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter and a planetary gear, multiple-disc clutch transmission which is hydraulically-actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral switch helps prevent accidental starts.
Travel speed: Forward: Reverse:
1st 2.1 mph
3.3 km/h
2.7 mph
4.4 km/h
2nd 3.8 mph 6.1 km/h 5.0 mph 8.0 km/h
3rd 6.3 mph 10.1 km/h 8.1 mph 13.0 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket rims are bolt-on for easy replacement.
Steering System
PCCS lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn.Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius 6'6" 1.99 m
Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Track shoes Lubricated tracks. Unique seals prevent entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 7
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 2.8" 72 mm
Shoe width (standard) 22" 560 mm
Ground contact area 5295 in² 34160 cm²
Ground pressure(with dozer, cab and ROPS) 10.7 psi 0.75 kg/cm² / 73.6 kPa
Track gauge 6'7" 2000 mm
Length of track on ground 10' 3050 mm
Coolant and Lubricant Capacity (refill)
Fuel tank 129 U.S. gal 490 ltr
Coolant 15.3 U.S. gal 58 ltr
Engine 10.0 U.S. gal 38 ltr
Torque converter, transmission, bevel gear, and steering system 15.9 U.S. gal 60 ltr
Final drive (each side) 6.9 U.S. gal 26 ltr
Operating Weight
Tractor weight:
Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 46,780 lb 21220 kg
Operating weight:
Including Semi-U tilt dozer or straight tilt dozer, multi-shank ripper, steel cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 61,950 lb 28100 kg
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control units: 2 x axial piston motors
All spool valves externally mounted beside the hydraulic tank. Plunger type hydraulic pump with capacity (discharge flow) of 195 ltr/min 51.5 U.S. gal/min at rated engine rpm.
Relief valve setting 3,270 psi 22.6 MPa230 kg/cm²
Control valves:
Spool control valves for tilt dozer:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for multi-shank ripper:
Ripper lift Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders: Bore Bore
Blade lift / 2 3.9" 100 mm
Blade tilt / 1 5.9" 150 mm
Ripper lift / 2 5.1" 130 mm
Hydraulic oil capacity (refill):
Straight tilt dozer 17.7 U.S. gal 67 ltr
Semi-U tilt dozer 17.7 U.S. gal 67 ltr
Ripper equipment (additional volume):
Multi-shank ripper 2.9 U.S. gal 11 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics