Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Edwards, Mississippi

If you are on the lookout for vendors who can supply heavy construction equipment for a new or ongoing project in Porterville, contact us and we will set you up in as little as one day!

Yes, getting started is easy. You just have to dial our toll free number or submit the contact form on the right.

Once we learn about the heavy machinery or tools you need at the construction site, we will put you in touch with trusted vendors offering construction equipment rentals in Edwards. You need not worry about the transportation of equipment/tools to the jobsite (even if it is to be one on a short notice).

When you are on a deadline, look no further than our reliable network of equipment vendors for one click or one phone-call access to all kinds of construction tools and machines.

Equipment Rental Edwards, Construction equipment rental Edwards, Construction Edwards, Heavy Equipment Rental Edwards.

Komatsu Dozers D61EX-17

D65EX-17 Crawler Dozer

The D65EX-17 provides excellent production and economy at the same time. The Komatsu exclusive Sigma blade can produce 15% more than a conventional semi-U blade and the automatic transmission with lock-up torque converter can reduce fuel consumption by up to 15% over the previous model. To make the operator more comfortable and productive, a new air suspension heavy duty heated seat is standard. Hydrostatic steering (HSS) with a palm command control joystick gives the operator the ability to make smooth turns under full power.

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed (quick shift mode)* Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rd 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
Travel speed (variable mode) 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h

Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.

STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

JLG® Telehandler G5-18A

JLG JLG® Telehandler G5-18A
Key Specs

  • Maximum Lift Capacity: 5512 lb / 2500 kg
  • Maximum Lift Height: 18 ft / 5.60 m
  • Maximum Reach: 11 ft / 3.30 m

Key Features

  • Comfortable cab to reduce operator fatigue
  • Tight turning radius to maneuver through crowded jobsites
  • Variety of attachments for versatility in handling jobsite challenges
  • Universal skid steer adapter compatible with existing skid steer attachments
  • Fuel-efficient Tier 4 final Deutz engine
Performance
Breakout Force 8093 lbf / 36 kN
Drawbar Pull 8902 lbf / 39.60 kN
Frame Leveling 0 Degrees
Lift Capacity at Full Height 4409 lb / 2000 kg
Lift Capacity at Max Reach (Stabs Up) 1764 lb / 800 kg
Load Center 1 ft 8 in. / 0.5 m
Maximum Lift Capacity 5512 lb / 2500 kg
Maximum Lift Height 18 ft / 5.60 m
Maximum Reach 11 ft / 3.30 m
Outriggers or Stabilizers No
Outside Turning Radius 10 ft 6 in. / 3.2 m
Speed - Maximum Crowd 3 sec.
Speed - Maximum Dump 2 sec.
Speed - Maximum Lift 7 sec.
Speed - Maximum Lower 5 sec.
Speed - Maximum Telescope In 4 sec.
Speed - Maximum Telescope Out 7 sec.
Speed - Maximum Travel 15 mph / 24 km/h
Towing Capacity 6614 lb / 3000 kg
Dimensional Data
Cab Width 2 ft 10 in. / 0.87 m
Ground Clearance 1 ft / 0.31 m
Machine Height 6 ft 4 in. / 1.92 m
Machine Length 12 ft / 3.66 m
Machine Length (Forks) 12 ft 6 in. / 3.82 m
Machine Width 6 ft / 1.83 m
Tire Size 12 X 16.5 12PR
Track Width 4 ft 11 in. / 1.51 m
Wheelbase 7 ft 6 in. / 2.29 m
Power Source
Capacity - Coolant 3 gal. / 13.20 L
Capacity - Engine Oil 2 gal. / 9.10 L
Capacity - Fuel Tank 24 gal. / 91 L
Engine Horsepower 74 hp / 55.40 kW
Engine Manufacturer Deutz
Engine Model TD 2.9 L4
Maximum Engine RPM 2300 rpm
General
Axle-Front High Bias, Limited Slip
Axle-Rear Oscillating
Capacity - Hydraulic Reservoir 16 gal. / 61 L
Function Pump Type Gear
Hydraulic System Flow 19 gal/min. / 72.30 L/Min
Hydraulic System Pressure 3495 psi / 241 bar
Operating Vehicle Weight 11001 lb / 4990 kg
Service Brake Type Wet Multi-Disc
Transmission Type Hydrostatic

Komatsu Dozers D51EXi-22
D51EXi-22 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA6D107E-1*
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 133 HP 99 kW
ISO 9249 / SAE J1349 - Net 130 HP 97 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic(reversible)
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 3 emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed
(quick shift mode)
Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.6 mph
0–9.0 km/h
0–5.6 mph
0–9.0 km/h
Travel speed (variable mode) Forward Reverse
0–5.6 mph
0–9.0 km/h
0–5.6 mph
0–9.0 km/h
FINAL DRIVE
Two-stage planetary gear integrated into axial piston travel motors. Compact in-shoe mount reduces risk of damage by debris. Bolt-on sprocket segments for easy replacement.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation. Hydrostatic Transmission (HST) eliminates steering clutches and brakes, providing smooth powerful turns. Fully electronic control enables smooth control. The PCCS utilizes shift buttons to increase and decrease speed.

 

Minimum turning radius* 7'10" 2.39 m
As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks: Unique seals help prevent entry of foreign abrasive material into pin to bushing clearances for long service life.
Parallel Link Undercarriage System (PLUS) Increased component size and strength, and rotating bushing design provide extended wear life and lower maintenance.
Number of track rollers (each side) 7
Type of shoes (standard) Single grouser PLUS
Number of shoes (each side) 44
Grouser height 2.2" 56 mm
Shoe width (standard) 22" 560 mm
Ground contact area 4,752 in² 30643 cm²
Ground pressure
(with dozer, ROPS cab)
5.76 psi 0.41 kgf/cm² / 39.7 kPa
Track gauge 5'10" 1790 mm
Length of track on ground 9'0" 2736 mm
SERVICE REFILL CAPACITIES
Coolant 9.3 U.S. gal 35 ltr
Fuel tank 71.3 U.S. gal 270 ltr
Engine oil 5.3 U.S. gal 20 ltr
Hydraulic tank 16.6 U.S. gal 63 ltr
Final drive (each side) 1.1 U.S. ga 4.0 ltr
Operating Weight
Tractor weight: Including ROPS cab, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
D51EX-22 24,074 lb 10920 kg
Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
D51EX-22 27,381 lb 12420 kg
hydraulic system
Closed-center Load Sensing System (CLSS) designed for precise and responsive control and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26.2 U.S. gal/min at rated engine rpm.
Relief valve setting 3,983 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders   Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.54" 90 mm
Blade tilt / 1 3.94" 100 mm
Blade angle / 2 3.54" 90 mm
Hydraulic oil capacity (refilling):  
Power angle tilt dozer 16.6 U.S. gal l 63 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift  Raise, hold, and lower

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics