Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Star, Mississippi

If you are on the lookout for vendors who can supply heavy construction equipment for a new or ongoing project in Porterville, contact us and we will set you up in as little as one day!

Yes, getting started is easy. You just have to dial our toll free number or submit the contact form on the right.

Once we learn about the heavy machinery or tools you need at the construction site, we will put you in touch with trusted vendors offering construction equipment rentals in Star. You need not worry about the transportation of equipment/tools to the jobsite (even if it is to be one on a short notice).

When you are on a deadline, look no further than our reliable network of equipment vendors for one click or one phone-call access to all kinds of construction tools and machines.

Equipment Rental Star, Construction equipment rental Star, Construction Star, Heavy Equipment Rental Star.

JCB Compaction Equipment VM 1500M

VM 1500M

The JCB VM 1500M is a manually controlled high-impact ground compactor designed for maximum productivity on a variety of different soils.

The VM 1500M trench roller is a class-leading performer and, when you look at the spec, it’s easy to see why. Our compaction rollers feature 4-drum drive steering and a centre-mounted vibration exciter system.

It also features an extremely high robustness considering the typical application in very confined areas for that kind of machine: all covers are made of robust steel to avoid damages.

There’s hydrodynamic braking, a quiet 22.8hp (16.8kW) 3-cylinder Kubota water-cooled engine, dual scrapers on each drum, an electric start and an engine pre-heater.

Compaction Performance
Operating Weight 3307lb (1500kg)
Centrifugal Force
Engine
Maximum Engine Power 23hp (16.8kW)

JCB Compaction Equipment VM 75PD

VM 75PD

The JCB VM 75PD vibrating roller is one of our smallest single drum soil compactor. It's nevertheless powerful and accurate, giving you quick, high quality results. It weighs 16,755lb (7600kg), has a drum width of 68.9in (1750 mm) and is powered by a highly efficient JCB Dieselmax 4.4 liter 84 hp (63 kW) engine.

The VM 75PD drum roller is built to perform, again and again and again. That means building it to last. It's an approach we'e taken with all of our compaction rollers, with every sophisticated component built to perform and cost you less. Just take the single-piece eccentric shaft with overturning weights, which produces optimum performance and minimum maintenance.

In fact performance is so good that compaction is best in class on the JCB VM 75PD vibrating roller. No wonder when you consider that standard equipment includes an Automatic Vibration Control, superb front-rear weight distribution, a switchable anti-slip system (SASS) and heavy-duty no-spin axles.

Compaction Performance
Operating Weight
16755lb (7600kg)
Centrifugal Force 156kN
Engine
Maximum Engine Power 84hp (63kW)

Komatsu Dozers D61EX-23

D61EX-23 Crawler Dozer

Hydrostatic drive gives the Komatsu Dozers D61EX-23 operator incredible control with tremendous pushing power. The super slant nose design gives the operator the balance he needs for high precision grading. Komatsu's Tier 4 interim solution lets the operator work during regeneration. To make the operator more comfortable and productive, a new air suspension heavy duty heated seat is standard.

Engine
Model Komatsu SAA6D107E-2*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 170 HP 127 kW
(ISO 14396 169 HP 126 kW
ISO 9249 / SAE J1349 - Net 168 HP 125 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0-3.4 km/h 0-2.1 mph 0-4.1 km/h 0-2.5 mph
2nd 0-5.6 km/h 0-3.5 mph 0-6.5 km/h 0-4.0 mph
3rd 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
Travel speed (variable mode) 0-9.0 km/h 0-5.6 mph 0-9.0 km/h 0-5.6 mph
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two-stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket teeth for easy displacement.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.
HYDROSTATIC TRANSMISSION (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.
Minimum turning radius (as measured by track marks on the ground at pivot turn.) 83"
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 8
Type of shoes (standard) Single grouser
Number of shoes (each side) 46
Grouser height 2.3" 57.5 mm
Shoe width (standard 24" 600 mm
Ground contact area 4,836 in² 31200 cm²
Ground pressure
(with dozer, ROPS canopy):
8.08 psi 55.7 kPa
0.57 kgf/cm²
Track gauge 6'3" 1900 mm
Length of track on ground 10'5" 3161 mm
SERVICE REFILL CAPACITIES
Coolant 11.9 U.S. gal 45 ltr
Fuel tank 98.3 U.S. gal 372 ltr
Engine oil 7.2 U.S. gal 27 ltr
Hydraulic tank 26.7 U.S. gal 101 ltr
Final drive (each side) 2.2 U.S. gal 8.1 ltr
Operating Weight (approximate)
Tractor weight Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
D61EX-23 36,999 lb 16780 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
D61EX-23 39,099 lb 17735 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 171 ltr/min / 45 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 280 kg/cm²
27.4MPa
Hydraulic cylinders 3,974
Hydraulic cylinders: Number of cylinders Bore
Blade lift 2 4"
100 mm
Blade tilt 1 5"
120 mm
Blade angle 2 4"
100 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 26.7 U.S. gal 101 ltr
Control valves:
3-spool control valve for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics