Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Belt, Montana

Do you need heavy construction equipment on rent in Belt? The requirement may be for a day, week or few months.

If the answer to this question is ‘yes,’ you have just landed on the right page! We represent one of the biggest networks of companies, contractors and professionals in the region that provide construction equipment rentals in Belt.

A rental is more flexible than leasing and you can get as many machines at the construction site as required within hours or a day at most. So, whether you are looking at the option of partnering with vendor that can meet your equipment needs on a job-to-job basis or want the latest heavy machinery for a big construction project in Belt, you can always count on us.

The vendors will contact you once we learn about your requirements. You can contact us at the toll free number or submit the contact form (on the right). We will contact you.

Equipment Rental Belt, Construction equipment rental Belt, Construction Belt, Heavy Equipment Rental Belt .

Komatsu Wheel Loaders WA900-3
WA900-3 Wheel Loader

Power, stability and maneuverability. That's what you get with the 17.0 yd3, 856 hp, WA900-3. High stability when digging in the pile and when maneuvering, the WA900-3 is a production loader that can exceed your demands. Using the advanced joystick steering, the operator has the precise control and nimble feel to make him think he's operating a loader half its size.

Engine
Model Komatsu SAA12V140E-3
Type Water-cooled, 4 cycle
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 12
Bore x stroke 5.51'' x 6.50'' 140 mm x 165 mm
Piston displacement 1,860 in³ 30.48 ltr
Governor all-speed, electronic
Flywheel horsepower
SAE J1995 - Gross 900 HP 672 kW
ISO 9249/SAE J1349 - Net 856 PS 638 kW
Rated rpm 2050 rpm
Fan drive method for radiator cooling Mechanical
Fuel system Direct injection
Lubrication system
Method Gear pump, force-lubrication
Filter Full-flow and bypass combined
Air cleaner Dry type with automatic dust ejector and pre-cleaner, cyclopac with vacuator
EPA Tier 2 emissions certified.
Transmission
Torque converter - Type 3-element, single-stage, single-phase
Transmission - Type Full-powershift, planetary type
Travel Speed*
1st Forward 4.3 mph 7.0 km/h
1st Reverse 4.4 mph 7.1 km/h
2nd Forward 7.6 mph 12.3 km/h
2nd Reverse 7.7 mph 12.4 km/h
3rd Forward 17.4 mph 28.0 km/h
3rd Reverse 17.6 mph 28.3 km/h
*Measured with 45/65-45, 58 PR (L-5)
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, full-floating
Rear Center-pin support, full-floating, 22° total oscillation
Reduction gear Spiral bevel gear
Differential gear Straight bevel gear
Final reduction gear Planetary gear, single reduction, oil bath
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Dry disc brake
Secondary brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 40° each direction
Minimum turning radius at the center of outside tire 30'2" 9200 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity / at rated rpm 83.2 U.S. gal/min 315 ltr/min
Relief valve setting 4,977 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 6.3" x 19.8" 160 mm x 503 mm
Loader control:
Hydraulic pump Piston pump
Capacity / at rated rpm 109.6 U.S. gal/min 415 ltr/min
Relief valve setting 4,977 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders—bore x stroke:
Boom cylinder - 2 10.2" x 53.9" 260 mm x 1368 mm
Bucket cylinder - 1 11.8" x 35.7" 300 mm x 906 mm
Control valve spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 11.2 sec
Dump 2.0 sec
Lower (Empty) 4.8 sec

Service Refill Capacities

ROPS and Cab
The cab is mounted on viscous damping mounts and is well insulated.
Cooling system 89.0 U.S. gal 337 ltr
Fuel tank 410.8 U.S. gal 1555 ltr
Engine 34.3 U.S. gal 130 ltr
Hydraulic system 191.5 U.S. gal 725 ltr
Axle (each front and rear) 95.1 U.S. gal 360 ltr
Torque converter and transmission 37.0 U.S. gal 140 ltr

Komatsu Dozers D51EXi-22
D51EXi-22 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA6D107E-1*
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 133 HP 99 kW
ISO 9249 / SAE J1349 - Net 130 HP 97 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic(reversible)
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 3 emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed
(quick shift mode)
Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.6 mph
0–9.0 km/h
0–5.6 mph
0–9.0 km/h
Travel speed (variable mode) Forward Reverse
0–5.6 mph
0–9.0 km/h
0–5.6 mph
0–9.0 km/h
FINAL DRIVE
Two-stage planetary gear integrated into axial piston travel motors. Compact in-shoe mount reduces risk of damage by debris. Bolt-on sprocket segments for easy replacement.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation. Hydrostatic Transmission (HST) eliminates steering clutches and brakes, providing smooth powerful turns. Fully electronic control enables smooth control. The PCCS utilizes shift buttons to increase and decrease speed.

 

Minimum turning radius* 7'10" 2.39 m
As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks: Unique seals help prevent entry of foreign abrasive material into pin to bushing clearances for long service life.
Parallel Link Undercarriage System (PLUS) Increased component size and strength, and rotating bushing design provide extended wear life and lower maintenance.
Number of track rollers (each side) 7
Type of shoes (standard) Single grouser PLUS
Number of shoes (each side) 44
Grouser height 2.2" 56 mm
Shoe width (standard) 22" 560 mm
Ground contact area 4,752 in² 30643 cm²
Ground pressure
(with dozer, ROPS cab)
5.76 psi 0.41 kgf/cm² / 39.7 kPa
Track gauge 5'10" 1790 mm
Length of track on ground 9'0" 2736 mm
SERVICE REFILL CAPACITIES
Coolant 9.3 U.S. gal 35 ltr
Fuel tank 71.3 U.S. gal 270 ltr
Engine oil 5.3 U.S. gal 20 ltr
Hydraulic tank 16.6 U.S. gal 63 ltr
Final drive (each side) 1.1 U.S. ga 4.0 ltr
Operating Weight
Tractor weight: Including ROPS cab, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
D51EX-22 24,074 lb 10920 kg
Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
D51EX-22 27,381 lb 12420 kg
hydraulic system
Closed-center Load Sensing System (CLSS) designed for precise and responsive control and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26.2 U.S. gal/min at rated engine rpm.
Relief valve setting 3,983 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders   Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.54" 90 mm
Blade tilt / 1 3.94" 100 mm
Blade angle / 2 3.54" 90 mm
Hydraulic oil capacity (refilling):  
Power angle tilt dozer 16.6 U.S. gal l 63 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift  Raise, hold, and lower

John Deere Wheel Loader 724K Tier 3
ThinK. Big.

Serious productivity demands serious thinking. Many of the numerous improvements in the 724K came from the brightest minds in the industry - loader owners and users such as yourself. Armed with fresh insights from this Customer Advocate Group, we enlarged the cab, redesigned the cooling, enhanced the hydraulics, refined the ergonomics, and offered even more options. All with the goal of increasing productivity and uptime, while lowering daily operating costs. Owners, operators, and maintenance personnel will all benefit from the big ideas found in the 724K wheel Loader.

ENGINE
Engine Make / Engine Model John Deere / Powertech Plus 6090H
Emission Rating Tier 3
Net Power, kW (hp) @ Rated rpm 197 (264) @ 1800
Displacement, L (cu in) 9 (548)
Net Peak Torque, N-m (lb-ft) 1159 (852)
Calculated % Torque Rise 60
ELECTRICAL
Volts 24
Alternator amps 100
TRANSMISSION
Type Powershift
Max. Travel Speed - fwd, kph (mph) 40 (24.9)
Max. Travel Speed - rev, kph (mph) 28.8 (17.9)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Wet Multi Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 310 (81.8)
System Pressure, kPa (psi) 25166 (3650)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 3.1 (4)
Bucket Capacity Max., cu m (cu yd) 3.6 (4.75)
Breakout Force, Std Bucket, kN (lb) 141.1 (31742)
Ride Control Optional
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 3.6 (4.75)
Tire Size Standard 23.5 R25
TIPPING LOAD
Straight, kg (lb) 16308 (35952.9)
Full Turn, kg (lb) 14049 (30972.7)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4120 (13 ft 6 in)
Dump Clear @ 45 deg, mm (ft in) 2840 (9 ft 4 in)
Reach @ 7', mm (ft in) 1670 (5 ft 6 in)
Reach @ Full Height, mm (ft in) 1130 (3 ft 9 in)
Wheelbase, mm (ft in) 3260 (10 ft 8 in)
Clearance Circle, mm (ft in) 13250 (43 ft 6 in)
Overall Length, mm (ft in) 8310 (27 ft 3 in)
Height to Top of Cab, mm (ft in) 3430 (11 ft 3 in)
Ground Clearance, mm (in) 461 (18.1)
CAPACITIES
Fuel Tank, L (gal) 352 (93)
Hydraulic Reservoir, L (gal) 110 (29)
WEIGHT
SAE Operating Weight, kg (lb) 19153 (42225)
Metric Ton Weight, kg (lb) 19.153 (42.225)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics