Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Birney, Montana

Do you need heavy construction equipment on rent in Birney? The requirement may be for a day, week or few months.

If the answer to this question is ‘yes,’ you have just landed on the right page! We represent one of the biggest networks of companies, contractors and professionals in the region that provide construction equipment rentals in Birney.

A rental is more flexible than leasing and you can get as many machines at the construction site as required within hours or a day at most. So, whether you are looking at the option of partnering with vendor that can meet your equipment needs on a job-to-job basis or want the latest heavy machinery for a big construction project in Birney, you can always count on us.

The vendors will contact you once we learn about your requirements. You can contact us at the toll free number or submit the contact form (on the right). We will contact you.

Equipment Rental Birney, Construction equipment rental Birney, Construction Birney, Heavy Equipment Rental Birney .

Hiring a Backhoe for your construction or transportation business cannot be a spur of the moment decision since the market is flooded with different makes and models. Backhoes come with different features and different brands use different technologies; the end user may or may not always be familiar with the pros and cons of numerous designs, technologies and features.

Don't fret if your ignorance is mounting the pressure on business performance.

HeavyRentals.Equipment can help you find reliable Backhoe rentals in Cache Junction. Our nationwide network of Backhoe companies across more than 5,000 locations all across the United States; we can come to your rescue, whether you need to rent Backhoe for a day, week, or months together.

When you hire from us, you needn't worry about the quality and efficiency of the equipment. We offer you access to a massive inventory of ready to be hired Backhoes in Cache Junction. We have on board vendors having Backhoes of all top brands; we have tied up with a large number of reliable Backhoe rental dealers in Cache Junction region already. So, you don't have to spend time researching, screening and interviewing vendors.

Before recommending a Backhoe rental company in Cache Junction, our team will personally assess your business needs and requirements. These requirements will be broken down into weight capacity, lift height, surface available for movement of the Backhoe, turning radius required, and of course your budget. You can narrate your requirements to our support team by dialing our helpline number, and also get free Backhoe rental estimates.

While we are here to make suitable suggestions, we let our clients have full control over their choices in renting Backhoes. When you rent with us be sure the Backhoe have been inspected to US safety standards.

Komatsu Dozers D37EXi-23

D37EXi-23 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 91 HP 68 kW
(ISO 14396 89 HP 66 kW
ISO 9249 / SAE J1349 - Net 79 HP 59 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Steering System Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.

Minimum turning radius: 87" 2.2 m
As measured by track marks on the ground at pivot turn.
Undercarriage
Suspension Rigid track frame
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Tractor for inside mounted blade (PAT)
Number of track rollers (each side) 6
Number of carrier rollers (each side) 1
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 1.9" 47 mm
Shoe width (standard) 18" 460 mm
Ground contact area 3,180 in² 20516 cm²
Ground pressure
(with standard shoe)
5.93 psi 0.42 kgf/cm² / 40.9 kPa
Track gauge 5'2" 1570 mm
Length of track on ground 7'4" 2230 mm
Link pitch 6.1" 154 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 16.9 U.S. gal 64 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,387 lb 8340 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,922 lb 9490 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refill):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold and lower

John Deere Wheel Loader 724K Tier 3
ThinK. Big.

Serious productivity demands serious thinking. Many of the numerous improvements in the 724K came from the brightest minds in the industry - loader owners and users such as yourself. Armed with fresh insights from this Customer Advocate Group, we enlarged the cab, redesigned the cooling, enhanced the hydraulics, refined the ergonomics, and offered even more options. All with the goal of increasing productivity and uptime, while lowering daily operating costs. Owners, operators, and maintenance personnel will all benefit from the big ideas found in the 724K wheel Loader.

ENGINE
Engine Make / Engine Model John Deere / Powertech Plus 6090H
Emission Rating Tier 3
Net Power, kW (hp) @ Rated rpm 197 (264) @ 1800
Displacement, L (cu in) 9 (548)
Net Peak Torque, N-m (lb-ft) 1159 (852)
Calculated % Torque Rise 60
ELECTRICAL
Volts 24
Alternator amps 100
TRANSMISSION
Type Powershift
Max. Travel Speed - fwd, kph (mph) 40 (24.9)
Max. Travel Speed - rev, kph (mph) 28.8 (17.9)
DIFFERENTIAL
Traction Device - Front / Rear F: 100 / R: Open
FINAL DRIVE
Front Axle Type Planetary - Inboard
Rear Axle Type Planetary - Inboard
SERVICE BRAKES
Service Brakes Type Wet Multi Disc
Service brake location Axle Inboard
Service brake actuation Hydraulic
HYDRAULIC SYSTEM
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 310 (81.8)
System Pressure, kPa (psi) 25166 (3650)
LOADER AND BUCKET
Bucket Capacity Min., cu m (cu yd) 3.1 (4)
Bucket Capacity Max., cu m (cu yd) 3.6 (4.75)
Breakout Force, Std Bucket, kN (lb) 141.1 (31742)
Ride Control Optional
SPECIFICATIONS BASED ON
Std Bucket Size, cu m (cu yd) 3.6 (4.75)
Tire Size Standard 23.5 R25
TIPPING LOAD
Straight, kg (lb) 16308 (35952.9)
Full Turn, kg (lb) 14049 (30972.7)
DIMENSIONS
Height of Hinge Pin, mm (ft in) 4120 (13 ft 6 in)
Dump Clear @ 45 deg, mm (ft in) 2840 (9 ft 4 in)
Reach @ 7', mm (ft in) 1670 (5 ft 6 in)
Reach @ Full Height, mm (ft in) 1130 (3 ft 9 in)
Wheelbase, mm (ft in) 3260 (10 ft 8 in)
Clearance Circle, mm (ft in) 13250 (43 ft 6 in)
Overall Length, mm (ft in) 8310 (27 ft 3 in)
Height to Top of Cab, mm (ft in) 3430 (11 ft 3 in)
Ground Clearance, mm (in) 461 (18.1)
CAPACITIES
Fuel Tank, L (gal) 352 (93)
Hydraulic Reservoir, L (gal) 110 (29)
WEIGHT
SAE Operating Weight, kg (lb) 19153 (42225)
Metric Ton Weight, kg (lb) 19.153 (42.225)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics