Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Conrad, Montana

Do you need heavy construction equipment on rent in Conrad? The requirement may be for a day, week or few months.

If the answer to this question is ‘yes,’ you have just landed on the right page! We represent one of the biggest networks of companies, contractors and professionals in the region that provide construction equipment rentals in Conrad.

A rental is more flexible than leasing and you can get as many machines at the construction site as required within hours or a day at most. So, whether you are looking at the option of partnering with vendor that can meet your equipment needs on a job-to-job basis or want the latest heavy machinery for a big construction project in Conrad, you can always count on us.

The vendors will contact you once we learn about your requirements. You can contact us at the toll free number or submit the contact form (on the right). We will contact you.

Equipment Rental Conrad, Construction equipment rental Conrad, Construction Conrad, Heavy Equipment Rental Conrad .

John Deere Scraper Systems 9520RT
9520RT
Why walk when you can run? The New 9RT Series Tractors are built to defy convention. With more engine horsepower (470 - 570 engine hp) and efficient FT4 engine technology, these machines welcome a good challenge. Just when you think there isn't any room for more, we outfitted the 9RT's with the new CommandViewTM III cab. It delivers more space, comfort and convenience than before, with a few features you might not expect. A new and improved e18TM Transmission with Efficiency Manager also adds to the appeal by providing the smoothest shifting power shift in the market, with an additional automatic mode. Get ready run!

FEATURES & SPECS

  • John Deere PowerTechTM 13.5L PSS
  • New and improved e18TM PowerShift Transmission
  • AirCushion Suspension System
  • New CommandViewTM III cab
Horsepower: 520 engine hp
Hydraulic Capacity: 115 U.S. gpm (435 L/min) standard
Drawbar Support: Available for long or short scraper drawbars

John Deere Scraper Systems 1810E
1810E
The 1810E Ejector Scraper is a four-tire scraper that carries 18 cu yd of material and has a 10-ft cutting width. This scraper works well for bulk-hauling construction contractors needing a narrow transport scraper. The 1810E requires at least 360 hp to pull in single, tandem, or triple scraper formation.

CAPACITY
Struck capacity cubic yards 12.5 cu yd
Heaped capacity cubic yards 18.3 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 29 ft 8 in. 9042 mm
Width, ft, in. (mm) 11 ft 3632 mm
Height, ft, in. (mm) 6 ft 7 in. 2007 mm
Bucket dimensions --
Length, ft, in. (mm) 9 ft 2 in. 2794 mm
Width, ft, in. (mm) 10 ft 6 in. 3200 mm
Height, ft, in. (mm) 4 ft 1321 mm
WEIGHT
Approximate shipping weight, lb (kg) 22,500 lb 10,205 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 26%
Wheels 74%
TIRES
Number of tires per scraper 4
Tire sizes --
Standard 20.5 X 25
Option 1 NA
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 360 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Yes
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Optional
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads Yes

John Deere Scraper Systems 1814E
1814E
The 1814E Ejector Scraper is a six-tire scraper that carries 18 cu yd of material and has a 14-ft cutting width. This scraper works well for construction contractors bulk-hauling materials using 360-hp to 575-hp tractors.

CAPACITY
Struck capacity cubic yards 13.2 cu yd
Heaped capacity cubic yards 18 cu yd
DIMENSIONS
Overall dimensions --
Length, ft, in. (mm) 26 ft 10 in. 8179 mm
Width, ft, in. (mm) 15 ft 11 in. 4851 mm
Height, ft, in. (mm) 6 ft 7 in. 2007 mm
Bucket dimensions --
Length, ft, in. (mm) 7 ft 8 in. 2337 mm
Width, ft, in. (mm) 14 ft 6 in. 4420 mm
Height, ft, in. (mm) 4 ft 1321 mm
WEIGHT
Approximate shipping weight, lb (kg) 25,800 lb 11,702 kg
SCRAPER WEIGHT DISTRIBUTION
Tongue 25%
Wheels 75%
TIRES
Number of tires per scraper 6
Tire sizes --
Standard 17.5 X 25
Option 1 20.5 X 25
Option 2 NA
HORSEPOWER RECOMMENDATIONS
Minimum 360 hp
Maximum 575+ hp
BLADES AND ROUTER
2 rows of blade bolts Standard
6-in. bolt-hole spacing Standard
Straight blade configuration Standard
Drop center configuration Optional
Teeth configuration Optional
Adjustable router bits Standard
HYDRAULICS
Size of lines and hoses 3/4 in.
Tandem lines Standard
Minimum flow required, gpm 25 gpm
Minimum pressure required, psi 2500 psi
PRECISION LEVELING
GPS/Laser adaptable Yes
LOADING TYPE
Direct loading Yes
Top loading Yes
Push loading Yes
Autoload Yes
HITCHES AND DRAWBARS
Hitch type Yoke
Special tractor drawbar required Yes
WARRANTY
Six months Standard
Extended warranty (2-3 years) Optional
ADDITIONAL EQUIPMENT
Yoke-type drawbars Optional
Quick-attach drawbars Optional
Drawbar hitch adapters Optional
Scraper-to-scraper quick-attach Optional
Bolt-on rear bumper Optional
Laser receiver bracket Optional
High-speed leveling skid pads NA

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics