Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Coram, Montana

Do you need heavy construction equipment on rent in Coram? The requirement may be for a day, week or few months.

If the answer to this question is ‘yes,’ you have just landed on the right page! We represent one of the biggest networks of companies, contractors and professionals in the region that provide construction equipment rentals in Coram.

A rental is more flexible than leasing and you can get as many machines at the construction site as required within hours or a day at most. So, whether you are looking at the option of partnering with vendor that can meet your equipment needs on a job-to-job basis or want the latest heavy machinery for a big construction project in Coram, you can always count on us.

The vendors will contact you once we learn about your requirements. You can contact us at the toll free number or submit the contact form (on the right). We will contact you.

Equipment Rental Coram, Construction equipment rental Coram, Construction Coram, Heavy Equipment Rental Coram .

Unable to parse entered address. API response code: REQUEST_DENIED

JLG Telehandlers G10-55A

JLG Telehandlers G10-55A
Key Specs

  • Maximum Lift Capacity: 10000 lb / 4535.92 kg
  • Outriggers Up Max Lift Height: 55 ft / 16.76 m
  • Maximum Reach: 42 ft 6 in. / 12.95 m
  • Maximum Lift Height: 55 ft / 16.76 m

Key Features

  • Roomier cab for added comfort and to reduce operator fatigue
  • All-wheel steering for easy maneuverability
  • Full range of attachments for versatility in handling jobsite challenges
  • Single joystick control for smooth operation of boom movements
  • Power shift transmission provides efficient control
Performance
Breakout Force 25600 lb / 11611.96 kg
Drawbar Pull 24000 lb / 10886.22 kg
Frame Leveling 10 Degrees
Outriggers Up Lift Capacity Full Height 4000 lb / 1814.37 kg
Outriggers Up Lift Capacity Full Reach 500 lb / 226.80 kg
Load Center 2 ft / 0.61 m
Maximum Lift Capacity 10000 lb / 4535.92 kg
Outriggers Up Max Lift Height 55 ft / 16.76 m
Outriggers Up Max Forward Reach 42 ft / 12.8 m
Lift Capacity at Full Height 5000 lb / 2267.96 kg
Lift Capacity at Max Reach 3000 lb / 1360.78 kg
Maximum Reach 42 ft 6 in. / 12.95 m
Maximum Lift Height 55 ft / 16.76 m
Outriggers or Stabilizers Yes
Outside Turning Radius 14 ft 6 in. / 4.41 m
Speed - Maximum Lift 15 sec.
Speed - Maximum Lower 14 sec.
Speed - Maximum Telescope In 12 sec.
Speed - Maximum Telescope Out 16 sec.
Speed - Maximum Travel 20 mph / 32.19 km/h
Dimensional Data
Ground Clearance 1 ft 7 in. / 0.48 m
Machine Height 8 ft 6 in. / 2.59 m
Machine Length 20 ft / 6.1 m
Machine Width 8 ft 6 in. / 2.59 m
Tire Size 400/75-28
Track Width 7 ft 4 in. / 2.24 m
Wheelbase 12 ft / 3.66 m
Power Source
Capacity - Fuel Tank 38 gal. / 143.85 L
Engine Horsepower 130 hp / 96.98 kW
Engine Manufacturer Cummins
Engine Model QSB4.5L
Maximum Engine RPM 2500 rpm
General
Axle-Front High Bias, Limited Slip
Axle-Rear Oscillating
Function Pump Type Var Load Sensing Piston
Hydraulic System Pressure 3625 psi / 253.86 Kg/cm2
Operating Vehicle Weight 34850 lb / 15807.69 kg
Service Brake Type Wet Multi-Disc
Transmission - Nr Forward Gears Standard 4
Transmission - Nr Reverse Gears 3
Transmission Type Powershift

JCB Light Equipment Diamond Core Drill

Diamond Core Drill

The heavy-duty JCB diamond core drill is designed to provide an unrivalled combination of power, flexibility and reliability for all manner of diamond core drilling jobs.

Diamond core drilling is the best way to get a clean cut on both sides of the drilled hole, and JCB's hydraulic drive provides extra benefits.
For example, it can withstand prolonged use and a constant operator-applied pressure without burning out motors, clutches or gearboxes.

What's more, our diamond core drill is over three times more powerful than a typical electric drill, meaning vastly reduced job times and a greater range of applications. In spite of all that, the motor noise is negligible.

Choose from a 2400 RPM @ 20 l/min model for 15-35 mm bits, or a 600 RPM @ 20 l/min option for 40-125 mm bits. Either can be either hand-held or rig mounted.

    • Side handle for ease of use
    • Tail hoses with quick release dripless couplings for speed of attachment change
    • Water hose port for dust suppression and cooling
    • Can be used under water for extra versatility
    • Optional drilling rigs
    • Optional core drill bits
    • Optional pressurised water hand pump
    • Optional extension rods

JCB Telescopic Handler 507-42

507-42
If your job requires you to only lift and place materials, then this Loadall is right for you. The high boom design allows for capacities of 7,000 pounds and a lift height of 42 feet. This model is ideal for masonry and framing applications and is a must for all rental fleets.

This easy to operate telescopic handler is equipped with low effort servo controls that are arranged in a pattern style that most operators are accustomed to. The 'low effort' doesn't just stop at operating the machine - with proven reliability and easy access to the side mounted engine for the daily checks, this machine is one of the easiest machines to maintain on the market today.

Lift Performance
Maximum Lift Capacity 7,000lb (3,176kg)
Maximum Lift Height 42' 0" (12m 8)
Engine
Maximum Engine Power 74hp (55kW)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics