Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Glasgow, Montana

Do you need heavy construction equipment on rent in Glasgow? The requirement may be for a day, week or few months.

If the answer to this question is ‘yes,’ you have just landed on the right page! We represent one of the biggest networks of companies, contractors and professionals in the region that provide construction equipment rentals in Glasgow.

A rental is more flexible than leasing and you can get as many machines at the construction site as required within hours or a day at most. So, whether you are looking at the option of partnering with vendor that can meet your equipment needs on a job-to-job basis or want the latest heavy machinery for a big construction project in Glasgow, you can always count on us.

The vendors will contact you once we learn about your requirements. You can contact us at the toll free number or submit the contact form (on the right). We will contact you.

Equipment Rental Glasgow, Construction equipment rental Glasgow, Construction Glasgow, Heavy Equipment Rental Glasgow .

Komatsu Dozers D65WX-17 WH

D65WX-17 WH Waste Handling Dozer

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

Komatsu Dozer D155AX-7
D155AX-7

The D155AX-7 is a dozer that bridges the gap between contractor site prep dozers and large contractor production/mining dozers. The Tier 4 interim D155AX-7 has the precise and responsive hydraulic control and smooth turning of hydrostatic steering of smaller dozers for grading and big dozer features like a lock-up torque converter, Unique, high production Sigma dozer blade and K-bogie oscillating undercarriage.

Engine
Model Komatsu SAA6D140E-6*
Type 4-cycle, water-cooled, direct injection
Aspiration 100 in³ Komatsu variable geometry turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed and mid-range, electronic
Horsepower :
SAE J1995 - Gross 360 HP 268 kW
ISO 9249 / SAE J1349 - Net 354 HP 264 kW
Rated rpm 1900 rpm
Fan drive type Hydraulic
Lubrication system :
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed:
1st Gear forward 2.4 mph 3.8 km/h
1st Gear reverse 2.9 mph 4.6 km/h
2nd Gear forward 3.5 mph 5.6 km/h
2nd Gear reverse 4.2 mph 6.8 km/h
3rd L Gear forward 4.7 mph 7.5 km/h
3rd L Gear reverse 5.7 mph 9.2 km/h
3rd Gear forward 7.2 mph 11.6 km/h
3rd Gear reverse 8.7 mph 14.0 km/h
Final Drive
Double-reduction, spur and planetary final drives increase tractive effort. Segmented sprockets are bolt-on for easy in the field replacement.
Steering System
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to the left to make a left turn. Tilt it to the right for a right turn.

Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gearshift lock lever also applies parking brakes.

Minimum turning radius 7'0" 2.14 m
Undercarriage
K-Bogie undercarriage
Lubricated track rollers are resiliently mounted on the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.Track shoes
Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.
Suspension Oscillation-type with equalizer bar and forward mounted pivot shafts
Track roller frame Monocoque, high-tensilestrength steel construction
Rollers and idlers Lubricated
Number of shoes (each side) 42
Grouser height 3.1" 80 mm
Shoe width (standard/maximum) 610 mm / 710 mm 24" / 28"
Ground contact area 6,193 in² 39955 cm²
Ground pressure (tractor only) 11.9 psi 82.4 kPa / 0.84 kg/cm²
Number of track rollers (each side) 7
Number of carrier rollers (each side) 2
Service Refill Capacities
Fuel tank 165 U.S. gal 625 ltr
Coolant 27.3 U.S. gal 103.5 ltr
Engine oil 9.8 U.S. gal 37 ltr
Damper 0.4 U.S. gal 1.5 ltr
Hydraulic oil 24.2 U.S. gal 91.5 ltr
Transmission, bevel gear, and steering system 23.8 U.S. gal 90 ltr
Final drive (each side) 8.2 U.S. gal 31 ltr
Operating Weight
Tractor weight
Including rated capacity of lubricant, coolant, full fuel tank, operator and standard equipment.Operating weight
Including strengthened SIGMADOZER®, giant ripper, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
Tractor weight 68,350 lb 31000 kg
Operating weight 87,100 lb 39500 kg
Ground pressure 15.4 psi 106 kPa / 1.08 kg/cm²
Hydraulic System
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control unit:
All spool control valves externally mounted beside the hydraulic tank. Variable piston pump with capacity (discharge flow) of 325 ltr/min 85.9 U.S. gal/min for steering and 180 ltr/min 47.6 U.S. gal/min for implemented at rated engine rpm.

Relief valve setting
. . . for implement 27.5 MPa 280 kg/cm² 3,980 psi
. . . for steering 38.2 MPa 390 kg/cm² 5,550 psi

Control valves:
Spool control valve for SIGMADOZER®, Semi-U tilt dozer and Full-U
Positions: Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
Positions: Ripper lift Raise, hold, and lower
Ripper tilt Increase, hold, and decrease
Hydraulic cylinders Double-acting, piston
Number of cylinders Bore Bore
Blade Lift / 2 4.33" 110 mm
Blade Tilt (Dual tilt) / 2 6.30" 160 mm
Blade Tilt (Single Tilt) / 1 6.30" 160 mm
Ripper Lift 7.09" 180 mm
Ripper Tilt / 1 7.87" 200 mm
Hydraulic oil capacity (refill):
SIGMADOZER 22.5 U.S. gal 85 ltr
Semi-U dozer 22.5 U.S. gal 85 ltr
Full-U dozer 22.5 U.S. gal 85 ltr
Ripper equipment (additional volume):
Multi-shank ripper 9.8 U.S. gal 37 ltr
Giant ripper 9.8 U.S. gal 37 ltr

If you own a construction company, run a warehouse or have a goods transport business in Cornville, chances are that you'd need a Excavator that you can deploy for indoor or outdoor operations.

But, not every business has the capital to invest in brand new Excavators. Even if the business is flourishing and you have all the funds needed to purchase new equipment, you may still want to go for Excavator rentals instead of betting a huge sum of money on purchasing such equipment.

But, finding reliable Excavator rentals in Cornville isn't exactly straightforward. From fee comparison to dependability on a vendor to availability of different makes and models of Excavators, there are numerous factors that one needs to consider when hiring a Excavator in Cornville.

This is where HeavyRentals.Equipment can help.

Our nationwide network of Excavator rental companies, spanning across 5,000+ locations covers Cornville as well. So, the next time you need a Excavator, whether for few hours, days, weeks or months at a stretch, you can just request a free Excavator rental estimate at HeavyRentals.Equipment. Within minutes, we will match your Excavator requirements in Cornville against vendors in your area; you will be talking to some of the most reliable vendors with well maintained fleet of Excavators on the same day. After all, we add a rental company or vendor to our list only after carrying out necessary background checks.

As far as important parameters such as Excavator weight capacity, adjustable width, power sources, ease-of-use and power steering are concerned - be assured that you will have no dearth of options to choose from. While you request a free estimate at HeavyRentals.Equipment or narrate your requirements to our support staff by dialing our helpline number, you remain in total control of which Excavator rental company in Cornville you wish to choose.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics