Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Glendive, Montana

Do you need heavy construction equipment on rent in Glendive? The requirement may be for a day, week or few months.

If the answer to this question is ‘yes,’ you have just landed on the right page! We represent one of the biggest networks of companies, contractors and professionals in the region that provide construction equipment rentals in Glendive.

A rental is more flexible than leasing and you can get as many machines at the construction site as required within hours or a day at most. So, whether you are looking at the option of partnering with vendor that can meet your equipment needs on a job-to-job basis or want the latest heavy machinery for a big construction project in Glendive, you can always count on us.

The vendors will contact you once we learn about your requirements. You can contact us at the toll free number or submit the contact form (on the right). We will contact you.

Equipment Rental Glendive, Construction equipment rental Glendive, Construction Glendive, Heavy Equipment Rental Glendive .

Electric Scissor Lift M3369LE

JLG Electric Scissor Lift M3369LE
Key Specs

  • Machine Width: 5 ft 9 in. / 1.75 m
  • Platform Capacity: 1000 lb / 453.59 kg
  • Platform Height: 33 ft / 10.06 m

Key Features

  • Superior performance on or off slab
  • Rugged terrain tires take you anywhere you want to go
  • With optional hydraulic leveling jacks, uneven terrain is no problem
  • Double the duty cycle of other scissor lifts so you can stay on the job longer
Power Source
Batteries 8 x 6V, 370 amp-hr
Charger 21 amp Automatic
Fuel Tank Capacity - Diesel 4 gal. / 15.14 L
Generator (Brand / HP / Fuel Type) Kubota / 6 HP / Diesel
General
Brakes Spring Applied Hyd. Released Discs
Capacity - Hydraulic Reservoir 9 gal. / 32.18 L
Ground Bearing Pressure 57 psi / 3.99 Kg/cm2
Hydraulic Pump Single Section Gear Pump
Machine Weight 10060 lb / 4563.14 kg
Performance
Drive Speed - Platform Elevated 0.40 mph / 0.64 km/h
Drive Speed - Platform Lowered 3 mph / 4.83 km/h
Gradeability - 2WD 35 %
Gradeability - 4WD 45 %
Lift Time 38 sec.
Lower Time 42 sec.
Maximum Drive Height 33 ft / 10.06 m
Maximum Lift Height 33 ft / 10.06 m
Platform Capacity 1000 lb / 453.59 kg
Platform Capacity - Extension 250 lb / 113.40 kg
Turning Radius - Outside 15 ft 6 in. / 4.72 m
Dimensional Data
Ground Clearance 8 in. / 0.2 m
Machine Height 9 ft / 2.74 m
Machine Height - Rails Folded 6 ft 5 in. / 1.96 m
Machine Length 10 ft 2 in. / 3.1 m
Machine Width 5 ft 9 in. / 1.75 m
Platform Dimension A 9 ft 7 in. / 2.92 m
Platform Dimension B 5 ft 5 in. / 1.65 m
Platform Extension Length 3 ft / 0.91 m
Platform Height 33 ft / 10.06 m
Platform Height - Lowered 5 ft 7 in. / 1.69 m
Platform Railing Height 3 ft 8 in. / 1.1 m
Tire Size 240/55 x 17.5 Non-Marking
Wheelbase 7 ft 7 in. / 2.3 m
Reach Specifications
Platform Height 33 ft / 10.06 m
Working Height 39 ft / 11.89 m

Komatsu Trucks HD785-7
HD785-7 Off-Highway Truck

If you are looking for a truck that perfectly matches power, speed and reliability, the 100 ton capacity HD785-7 is the truck for you. Your operator can max his production by using his two working modes, tight turning radius, hydropneumatic suspension, skip shift function and oil multi-disc brakes and retarder. And he'll do it in comfort in an ergonomic cab that rides on viscous dampers that reduce vibration and sound. Downshift, over-run and reverse inhibitors protect the truck and give the operator peace of mind.

Engine
Model Komatsu SAA12V140E-3
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled
Number of cylinders 12
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 1,860 in³ 30.48 ltr
Horsepower:
SAE J1995 / Gross Gross 1,200 HP Gross 895 kW
ISO9249/SAE J1349 / Net Net 1,178 HP Net 879 kW
Rated rpm 1,900 rpm
Fan drive type Mechanical
Maximum torque 3,747 lb ft 518 kg-¢m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system :
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and pre-cleaned, with dust indicator
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission: Full-automatic, planetary-shaft type
Speed range 7 speeds forward and 2 reverse (RH, RL)
Lockup clutch Wet, multiple-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive, direct drive (lockup)
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 40.4 mph 65 km/h
Axles
Rear Axle Full-floating
Final drive type Planetary gear
Ratios:
Differential 3.357
Planetary 6.333
Suspension System
Independent, hydropneumatic suspension cylinder with fixed throttle to dampen vibration.
Effective cylinder stroke:
Front suspension 12.6" 320 mm
Rear suspension 5.0" 127 mm
Rear axle oscillation 6.5°
Steering system
Type Fully hydraulic power steering with two double-acting cylinders
Supplementary steering Electro-hydraulic motor
Minimum turning radius 33'2" 10.1 m
Maximum steering angle 41°
Cab
Integral four-post ROPS/FOPS Level 2 cab structure
Main Frame
Type Box-sectioned structure Integral front bumper
Brakes
Brakes meet ISO 3450 standard.
Service brakes:
Front Fully hydraulic control, oil-cooled multiple-disc type
Rear Fully hydraulic control, oil-cooled multiple-disc type
Parking brake Spring applied, multiple-disc type(actuates on all wheels)
Retarder Oil-cooled, multiple-disc front and rear brakes act as retarder
Secondary brake Manual pedal operation. When hydraulic pressure drops below the rated level, parking brake is automatically actuated.
Brake surface:
Front 5,807 in² 37467 cm²
Rear 11,224 in² 72414 cm²
Body
Capacity:
Struck 52.3 yd³ 40 m³
Heaped (2:1 ,SAE) 78.5 yd³ 60 m³
Payload 100.3 U.S. tons 91.0 metric tons
Material 400 Brinell hardness high tensile strength steel
Structure V-shape body with V-bottom
Material thickness:
Bottom 0.75" 19 mm
Front 0.47" 12 mm
Sides 0.35" 9 mm
Target area: (inside length x width) 23'2"x 17'1" 7065 mm x 5200 mm
Dumping angle 48°
Height at full dump 33'1" 10080 mm
Heating Exhaust heating
HyDRaulic System
Hoist cylinder Twin, 2-stage telescopic type
Relief pressure 2,990 psi 20.6 MPa / 210 kg/cm²
Hoist time
Raise 13 sec
Lower 14 sec
Weight (approximate)
Empty weight 158,800 lb 72000 kg
Max. gross vehicle weight: 366,000 lb 166000 kg
Not to exceed max. gross vehicle weight, including options, fuel and payload.
Weight distribution (Empty):
Front axle 47%
Rear axle 53%
Weight distribution (Loaded):
Front axle 31.5%
Rear axle 68.5%
tires
Standard Tires 27.00 R49
Service Refill Capacities
Fuel tank 345.6 U.S. Gal 1308 ltr.
Engine oil 34.1 U.S. Gal 129 ltr.
Torque converter, transmission and retarder cooling 54.2 U.S. Gal 205 ltr.
Differentials 36.2 U.S. Gal 137 ltr
Final drives (total) 33.8 U.S. Gal 128 ltr.
Hydraulic system 46.2 U.S. Gal 175 ltr.
Brake control 9.5 U.S. Gal 36 ltr.
Suspension (total) 24.6 U.S. Gal 93 ltr.
Engine coolant 74.8 U.S. Gal 283 ltr

Komatsu Trucks 930E-4

930E-4 Electric Drive Truck

 

Engine
Make and model Komatsu SSDA16V160*
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
**Rated brake power @ 1900 rpm 2,700 HP 2014 kW
***Flywheel power @ 1900 rpm 2,550 HP 1902 kW
Weight (wet) 21,182 lb 9608 kg
* Tier 2 emissions compliant. Tier 1 emissions engine is optional outside of North America.
** Rated brake power is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump
***Flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent gross engine performance accordance with SAE J1349 conditions.
Electric Drive
*Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
*Optional ratios available.
AC/DC CURRENT
Alternator GTA-41
Dual impeller in-line blower 12,000 cfm 340 m³/min
Control AC Torque Control System
Motorized wheels* GDY106 Induction Traction Motors
Ratio* 32.62:1
Speed (maximum) 40 mph 64.5 km/h
Tires and Rims
*Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Rock service, tubeless, radial tires
Standard tire* 53/80 R63
Taper lock, five (5) piece rim 36'' x 63'' x 5.0'' / 914 mm x 1600 mm x 127 mm rim assembly. Rims rated at 758 kPa 110 psi cold inflation pressure.
Typical tire weight 57,600 lb 26127 kg
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Eyebrow, rear wheel rock ejectors, body tilt cable, and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet
200,000 psi / 1379 mPa tensile strength steel (two-piece)
0.63'' 16 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel
0.35'' 9 mm
Side sheet
200,000 psi / 1379 mPa tensile strength steel
0.31'' 8 mm
Canopy sheet
100,000 psi / 690 mPa
0.19'' 5 mm
Struck 224 yd³ 171 m³
Standard SAE heaped 2:1 276 yd³ 211 m³
Standard Komatsu body weight 66,936 lb 30362 kg
*Komatsu must approve all bodies through a Body Application Worksheet.
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS structure (meets J1040 Apr88), adjustable air suspension seat w/lumbar support and arm rests, passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted safety glass, power windows, Komatsu Payload Weighing System, 55,000 Btu/hr heater and defroster, 21,600 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material tensile strength steel 70,000 psi 482.6 mPa
Casting material
tensile strength steel
90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.77'' 45 mm
Side plate thickness 0.98'' 25 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
Service brakes: oil-cooled, hydraulic-actuated, multiple disc brakes at each wheel. Traction system wheel slip/slide control.
Max. service apply pressure 2500 psi 17237 kPa
Total friction area per brake 15,038 in² 97025 cm²
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch activated
Parking brakes Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on 15% grade @ maximum gross vehicle weight.
Electric dynamic retarder:
Max 5400 hp 4026 kW
Continuous 3300 hp 2460 kW
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.92'' 328 mm
Max. rear stroke 9.40'' 239 mm
Max. rear axle oscillation 6.5°
Cooling System
L&M radiator assembly, split-flow, with deareation-type top tank.
Radiator frontal area 75.5 ft² 7.02 m²
Service Capacities
Cooling System 157 U.S. gal 594 L
Crankcase* 74 U.S. gal 280 L
Hydraulic system 350 U.S. gal 1325 L
Motor gear box (each) 25 U.S. gal 95 L
Fuel 1200 U.S. gal 4542 L
*Includes lube oil filters
Hydraulic System
Steering Accumulator assisted twin double acting cylinders provide constant rate steering. Emergency steering automatically applied by accumulator.
Turning circle diameter (SAE) 97'7'' 29.7 m
Reservoir 250 U.S. gal 947 L
Filtration In-line replaceable elements
Suction Single, full flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 21 sec
Power-down 23 sec
Float-down empty 24 sec
Pumps Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 1022 lpm / 270 gpm at 1900 rpm and 17237 kPa / 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 246 lpm / 65 gpm at 1900 rpm and 18961 kPa / 2,750 psi
System relief pressures:
Hoist and brake cooling 2,500 psi 17237 kPa
Steering and brake 4,000 psi 27579 kPa
Quick disconnects standard for powering disabled truck and for systems diagnostics.
Electric System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch and lockout.
Alternator 24 volt, 260 amp
Lighting 24 volt
Cranking motors Two/24 volt
Weight Distribution
Empty vehicle weight (wet, 100% fuel, no options, std Komatsu body, std tires):
Front axle / 47% 219,826 lb 99711 kg
Rear axle / 53% 243,557 lb 110476 kg
Total EVW 463,383 lb 210187 kg
Gross vehicle weight (Nominal):
Front axle / 33% 365,201 lb 165651 kg
Rear axle / 67% 741,469 lb 336323 kg
Total 1,106,670 lb 501974 kg
Nominal payload* 643,287 lb 291790 kg
320 U.S. ton
*Nominal payload is defined by Komatsu America Corp. payload policy documentation. In general, the nominal payload must be adjusted for the specific vehicle configuration and site application. The figures above are provided for basic product description purposes. Please contact your Komatsu distributor for specific application requirements.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics