Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Inverness, Montana

Do you need heavy construction equipment on rent in Inverness? The requirement may be for a day, week or few months.

If the answer to this question is ‘yes,’ you have just landed on the right page! We represent one of the biggest networks of companies, contractors and professionals in the region that provide construction equipment rentals in Inverness.

A rental is more flexible than leasing and you can get as many machines at the construction site as required within hours or a day at most. So, whether you are looking at the option of partnering with vendor that can meet your equipment needs on a job-to-job basis or want the latest heavy machinery for a big construction project in Inverness, you can always count on us.

The vendors will contact you once we learn about your requirements. You can contact us at the toll free number or submit the contact form (on the right). We will contact you.

Equipment Rental Inverness, Construction equipment rental Inverness, Construction Inverness, Heavy Equipment Rental Inverness .

Komatsu Excavators PC210LCi-10

PC210LCi-10 Hydraulic Excavator

The Komatsu PC210LCi-10 is the world's first intelligent Machine Control excavator. It features Komatsu's revolutionary machine control and guidance system, fully factory integrated with the other qualities and benefits of the standard Komatsu PC210LC-10 excavator. The exclusive control function lets you focus on moving material efficiently, with no worry about digging too deep or damaging the target surface. From rough digging to finish grading, the PC210LCi-10 excavator drastically improves efficiency and precision on your work sites. Unearth your productivity.

Engine
Model Komatsu SAA6D107E-2*
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 107 mm 4.21''
Stroke 124 mm 4.88''
Piston displacement 6.69 ltr 408 in³
Horsepower:
SAE J1995 - Gross 123 kW 165 HP
ISO 9249 / SAE J1349 - Net 118 kW 158 HP
Rated rpm 2000 rpm
Fan drive method for radiator cooling Mechanical
Governor All-speed control, electronic
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydraulics
Type - HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 475 ltr/min 125.5 U.S. gal/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 380 kgf/cm²/ 37.3 MPa 5,400 psi
Travel circuit 380 kgf/cm² / 37.3 MPa 5,400 psi
Swing circuit 295 kgf/cm²/ 28.9 MPa 4,190 psi
Pilot circuit 33 kgf/cm² / 3.2 MPa 470 psi
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 Bore x Stroke x Rod Diameter 5.1" x 52.5" x 3.5"
Arm / 1 Bore x Stroke x Rod Diameter 5.3" x 58.7" x 3.7"
Bucket / 1 Bore x Stroke x Rod Diameter 4.5" x 44.1" x 3.2"
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 202 kN / 20570 kg 45,349 lb
Gradeability 70% 35°
Maximum travel speed: (Auto-Shift)
High 5.5 km/h 3.4 mph
Mid 4.1 km/h 2.5 mph
Low 3.0 km/h 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 12.4 rpm
Swing torque 6900 kg.m 49,907 ft lbs
Undercarriage
Center frame X-leg frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 49 each side
Number of carrier rollers 2 each side
Number of track rollers 9 each side
Coolant and Lubricant Capacity refilling
Fuel tank 400 ltr 105.7 U.S. gal
Coolant 30.7 ltr 8.1 U.S. gal
Engine 23.1 ltr 6.1 U.S. gal
Final drive, each side 5.0 ltr 1.3 U.S. gal
Swing drive 6.5 ltr 1.7 U.S. gal
Hydraulic tank 132 ltr 34.9 U.S. gal
Hydraulic system 234 ltr 61.8 U.S. gal
Operating Weight (APROXIMATE)
Operating weight, including 5700 mm / 18'8" one-piece boom, 2925 mm / 9'7" arm, SAE heaped 1.02 m³ / 1.34 yd³ bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Triple-Grouser Shoes Ground Pressure: Operating Weight:
28" / 700 mm 23323 kg
51,419 lb
0.43 kg/cm²
6.2 psi
31.5' / 800 mm 23603 kg
52,036 lb
0.38 kg/cm²
5.5 ps

Komatsu Excavators PC490LC-11
PC490LC-11 Hydraulic Excavator

The PC490LC-11 with an operating weight of 105,670 lbs (47,930 kg) to 110,220 lbs (49,995 kg), is a large performance oriented excavator with reinforced undercarriage for high lift capacity, lateral stability and added durability. The PC490LC-11 leverages Komatsu engine technology to provide a productive, dependable and efficient Tier 4 Final emissions certified machine that does not interfere with daily operation. An enhanced Power Mode provides improved hydraulic flow, reduced cycle time and better productivity than the previous model it replaces. The PC490LC-11 is ideally sized for high production earthmoving applications while be easily transportable.

Engine
Model Komatsu SAA6D125E-7*
Type Water-cooled, 4-cycle, direct injection
Aspiration Komatsu Variable Geometry Turbocharger with air-to-air aftercooled EGR
Number of cylinders 6
Bore 125 mm 4.92"
Stroke 150 mm 5.91"
Piston displacement 11.04 ltr 674 in³
Horsepower
SAE J1995 : Gross 270 kW 362 HP
ISO 9249/SAE J1349 : Net 268 kW 359 HP
Rated rpm 1900 rpm
Governor All-speed control, electronic.
Fan drive method for radiator cooling Hydraulic
*EPA Tier 4 Final emissions certified
Hydraulic
Type: HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valves, 6 selectable working modes
Main pumps:
Pumps for Boom, arm, bucket, swing, and travel circuits
Type Variable displacement axial piston type
Maximum flow 780 ltr/min 206 U.S. gal/min
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 380 kgf/cm²/ 37.3 MPa 5,400 psi
Travel circuit 380 kgf/cm² / 37.3 MPa 5,400 psi
Swing circuit 285 kgf/cm²/ 27.9 MPa 4,050 psi
Pilot circuit 33 kgf/cm² / 3.2 MPa 470 psi
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 160 mm x 1570 mm x 110 mm 6.3" x 61.8" x 4.3"
Arm / 1 185 mm x 1820 mm x 120 mm 7.3" x 71.7" x 4.7"
Bucket / 1 160 mm x 1270 mm x 110 mm 6.3" x 50" x 4.3"
Drives & Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 329 kN / 33510 kg 73,880 lb
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift):
High 5.5 km/h 3.4 mph
Mid 4.2 km/h 2.6 mph
Low 3.0 km/h 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.0 rpm
Swing torque 13414 kg•m 97,024 ft. lbs.
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes 49 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 650 ltr 172 U.S. gal
Coolant 47 ltr 12.4 U.S. gal
Engine 38 ltr 10.0 U.S. gal
Final drive, each side 11 ltr 2.9 U.S. gal
Swing drive 20 ltr 5.3 U.S. gal
Hydraulic tank 248 ltr 65.5 U.S. gal
Diesel Exhaust Fluid (DEF) tank 39 ltr 10.3 U.S. gal
Operating Weight (approximate)
Operating weight includes 7060 mm 23'2" one-piece HD boom, 3380 mm 11'1" arm, SAE heaped 2.25 m3 2.94 yd3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Fixed Gauge
Shoes 700 mm 28"
Operating Weight 47930 kg 105,670 lb
Ground Pressure 0.73 kg/cm² 10.38 psi
Shoes 800 mm 31.5''
Operating Weight: 48430 kg 106,770 lb
Ground Pressure 0.65 kg/cm² 9.20 psi
Shoes 900 mm 35.5"
Operating Weight: 48920 kg 107,850 lb
Ground Pressure 0.58 kg/cm² 8.32 psi
Variable Gauge
Shoes 700 mm 28"
Operating Weight 49005 kg 108,040 lb
Ground Pressure 0.75 kg/cm² 10.61 psi
Shoes 800 mm 31.5''
Operating Weight: 49505 kg 109,140 lb
Ground Pressure 0.67 kg/cm² 9.40 psi
Shoes 900 mm 35.5"
Operating Weight: 49995 kg 110,220 lb
Ground Pressure 0.60 kg/cm² 8.50 psi

Komatsu Excavators PC390LC-10 SLF
PC390LC-10 Super Long Front Hydraulic Excavator

If you need a powerful and stable excavator, but also need a large working envelope, mount a super long front to the PC360LC-10 and you'll have all the power and reach you need. The functions and operations are that of the standard excavator but with a wide variety of ditch cleaning and general purpose buckets for dredging, cleaning and sloping applications.

Notes:

  • The details in this specification brochure are based on Dash 8 and Dash 10 models as indicated. Some attachments may be installed on prior models but specifications may vary. Contact Young Corporation for details.
  • Variations to the specifications in this brochure can be designed and produced in accordance with customer requirements by contacting Young Corporation with details.
  • SUPER LONG FRONT ATTACHMENTS are designed for “LIGHT DUTY" work only. Excavating work or heavy hoisting may result in side loads and other activities that will damage the machine.
  • Disassembly may be required due to transport restrictions.
  • Illustrations may include optional equipment.
  • Operating weights include additional counterweight when required.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics