Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Endicott, Nebraska

Almost 8 out of 10 construction contractors are now opting for heavy construction equipment rentals. It is no coincidence that just about any contractor you meet nowadays, is of the opinion that sourcing heavy machinery such as rollers, dozers, excavators, lifts, etc. on a rental model is way better an option than leasing or buying them.

While leasing is somewhat inflexible, purchase of construction equipment is hardly an option for contractors who do not have projects lined up at all times. The ownership costs can significantly lower the profit margins of a contractor in that case.

If you are in need of heavy construction equipment, machines, tools and accessories at the construction site, just dial our toll free number and let us put you in touch with the right vendors.

Alternatively, you can also submit the online query form on the right. We will get back to you in no time.

Equipment Rental Endicott, Construction equipment rental Endicott, Construction Endicott, Heavy Equipment Rental Endicott.

John Deere Articulated Dump Trucks 370E
Supersize your productivity.

Equipment owners and operators such as you gave us plenty of big ideas for our reimagined E-Series. The 370E comes loaded with a John Deere EPA Interim Tier 4 (IT4) diesel engine. Purpose-built transmissions with eight forward and four reverse gears. Heavy-duty John Deere-built axles with wet-disc brakes. Standard adaptive suspension. Numerous automated functions for simplified operation. And ground-level daily and periodic servicing. With the E-Series, you get everything you need to boost productivity and uptime, and reduce your daily operating costs. Big time.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech 6135
Net Power, kW (hp) @ Rated rpm 315 (422) @ 1900
Displacement, L (cu in) 13.5 (824)
Calculated Torque Rise (percentage) --
Transmission
Transmission Manufacturer John Deere
Transmission Type Powershift
Number of Gears Forward and Reverse 8F - 4R
Max. Travel Speed - fwd, kph (mph) 53 (33)
Max. Travel Speed - rev, kph (mph) 16 (10)
Axles
Type Planetary - Outboard
Axle Diff. Lock Transverse Cross-axle Diff Lock
Brakes
Service Brake Type Wet Multi Disc
Engine Brake Transmission
Retarder Other Type --
Parking Brake Type Spring Applied / Hydraulically Released
Suspension
Front Type A-Frame
Front Suspension Nitrogen/Oil-Filled Struts - Auto Levelling
Rear Type Pivoting Walking Beam
Rear Suspension Rubber Suspension Blocks
Load Body
Construction Standard
Body Tipping Angle Degrees 70
Body Tipping Time to Raise seconds 13
Body Tipping Time to Lower seconds 7
Tip Cylinders Type Twin 1-Stage
Power Down Yes
Steering & Articulation
Articulation Angle, degrees 45
Steering Turns Lock to Lock 4.1
Secondary Steering Type Yes
Dimension
Overall Length, mm (ft in) 10810 (35 ft 6 in)
Overall Tire Width, mm (ft in) 3440 (11 ft 3 in)
Overall Height, mm (ft in) 3810 (12 ft 6 in)
Loadover Height, mm (ft in) 3260 (10 ft 8 in)
Approach Angle degrees 24
Outside Turning Radius, mm (ft in) 8900 (29 ft 2 in)
Inside Turning Radius, mm (ft in) 4630 (15 ft 2 in)
Cab
Steering Wheel Adjustment description Fully Adjustable
Air Conditioner Yes
Tires
Standard 26.5 R25
Capacities
Fuel Tank, L (gal) 609 (161)
Hydraulic Reservoir, L (gal) 242 (64)
Payload
Capacity Struck, cu m (cu yd) 16.3 (21.3)
Capacity Heaped SAE 2:1, cu m (cu yd) 20.5 (26.8)
Weight
Operating Weight Empty, kg (lb) 30782 (67862)
Payload Weight, kg (lb) 33630 (74141)
Gross Weight, kg (lb) 64412 (142003)
Gross Weight, kg (lb) 64412 (142003)

Komatsu Trucks 730E-8

730E-8 Electric Drive Truck

The 203 ton capacity 730E-8 is a very versatile electric drive truck that features 1,860 flywheel horsepower. The cab has an integral ROPS, air ride seat, dynamic retarding and power steering with auto emergency steering to make the operator comfortable and more productive. To make the 730E more productive, a trolley assist option is available for circumstances where an overhead electrified trolley system can be used.

Engine
Make and model* Komatsu SSDA16V159
Fuel Diesel
Number of cylinders 16
Operating cycle 4 cycle
Gross horsepower** @ 1900 rpm 2,000 HP 1492 kW
Net flywheel power*** @ 1900 rpm 1,884 HP 1405 kW
* Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America.
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC current
Alternator GTA-49
Dual impeller in-line blower 13,900 cfm 393 m³/min
Control AC Torque Control System
Motorized wheels* GEB35 Induction Traction Motors
Ratio 30.8:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, tires
Standard tire* 37.00 R57
Flange mount rim 686 mm x 1448 mm x 152 mm 27'' x 57'' x 6'' rim assembly. Rims rated at 758 kPa 110 psi cold inflation pressure.
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Eyebrow, rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet - Outer (1379 MPa 200,000 psi tensile strength steel) 0.63'' 16 mm
Floor sheet - Center (1379 MPa 200,000 psi tensile strength steel) 0.75'' 19 mm
Front sheet (1379 MPa 200,000 psi tensile strength steel) 0.39'' 10 mm
Side sheet (1379 MPa 200,000 psi tensile strength steel) 0.31'' 8 mm
Canopy sheet (690 MPa 100,000 psi tensile strength steel) 0.24'' 6 mm
Capacity struck 153 yd³ 117 m³
SAE heaped 2:1 193 yd³ 148 m³
Standard Komatsu body weight 62,100 lb 28169 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab, adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant).
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material 70,000 psi 482.6 mPa tensile strength steel
Casting material 90,000 psi 620.5 mPa tensile strength steel
Rail width 11.02'' 280 mm
Rail depth (minimum) 31.38'' 797 mm
Top and bottom plate thickness 1.26'' 32 mm
Side plate thickness 0.75'' 19 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
System meets ISO 3450/1996.
Service brakes: all-hydraulic actuated.
Front: Wheel speed disc. Three calipers on a 1213 mm / 47.75" O.D. disc
Rear Dual disc armature speed. Two 635 mm / 25" O.D. discs per side. One caliper per disc.
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch-activated
Parking brakes Spring-applied, hydraulically released, with speed application protection.
Electric dynamic retarder (max.) 3,200 hp / 2387 kW Continuously rated high-density blown grids w/retard at engine idle and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.28'' 312 mm
Max. rear stroke 10.98'' 279 mm
Max. rear axle oscillation ±5.3°
Cooling System
L&M radiator assembly, split-flow, with deaerator-type top tank
Radiator frontal area 50.1 ft² 4.65 m²
Service Capacities
Cooling system 117 U.S. gal 441 L
Crankcase* 59 U.S. gal 223 L
Hydraulic system 210 U.S. gal 795 L
Motor gear box (each) 10 U.S. gal 38 L
Fuel 800 U.S. gal 3028 L
*Includes lube oil filters
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 89' 27.2 m
Reservoir 135 U.S. gal 511 L
Filtration In-line replaceable elements
Suction Single, full-flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 19 sec
Power-down 10.5 sec
Float--down empty 12 sec
Pumps: Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 666 lpm 176 gpm at 1900 rpm and 18961 kPa 2,500 psi
Steering and brake Pressure-compensating piston pump with output of 254 lpm 67 gpm at 1900 rpm and 19134 kPa 2,775 psi
System relief pressures:
Hoist 2,500 psi 17237 kPa
Steering and brake 4,000 psi 27580 kPa
Electric System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24-volt 250 amp
Lighting 24 volt
Cranking motors Two/24 volt

Komatsu Trucks HM300-3
HM300-3 Articulated Truck

An operator who likes cycle quickly through any ground conditions and do it in comfort will love the HM300-3. Komatsu Traction Control System coupled to the power of the Tier 4 interim Komatsu engine and two working modes give the operator the tools they'll need and to complete their job efficiently and profitably. A center located air suspension operator seat, a forward facing training seat, separate rear view monitor, and large LED multi-language monitor Provide the operator what he needs to operate productively in comfort for his full shift.

Engine
Model Komatsu SAA6D125E-6*
Type Water-cooled, 4-cycle
Aspiration Komatsu variable geometry, turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 4.92" 125 mm
Stroke 5.91" 150 mm
Piston displacement 674 in3 11.04 ltr
Horsepower :
SAE J1995 332 HP 248 kW
ISO 9249 / SAE J1349 324 HP 242 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Maximum torque 1239 ft lbs 1680 N 71 kg-m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 36.4 mph 58.6 km/h
Axles
Full time all wheel drive
Final drive type Planetary gear
Ratios:
Differential 3.154
Planetary 4.667
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Minimum turning radius, wall to wall 26'7" 8.10 m
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 17.5 yd3 13.4 m3
Heaped (2:1, SAE) 22.4 yd3 17.1 m3
Payload 30.9 U.S. tons 28.0 metric tons
Material - high tensile strength steel 184,925 psi 130 kg/mm2
Material thickness:
Bottom 0.55" 14 mm
Front 0.31" 8 mm
Sides 0.47" 12 mm
Target area - (inside length x width) 17'3" x 8'10" 5250 mm x 2685 mm
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 4264 psi 300 kg/cm2 / 29.4 Mpa
Hoist time 10.5 sec
Weight (approximate)
Empty weight 54,917 lbs 24,910 kg
Gross vehicle weight 116,823 lbs 52,990 kg
Weight distribution:
Empty:
Front axle 57.0%
Center axle 23.0%
Rear axles 20.0%
Loaded:
Front axle 29.0%
Center axle 36.5%
Rear axles 34.5%
Tires
Standard tire 23.5 R25
Service Refill Capacities
Fuel tank 102.6 U.S. gal 388.3 L
Engine oil 9.2 U.S. gal 35 L
Torque converter, transmission and retarder cooling 25.9 U.S. gal 98 L
Differentials (total) 18.9 U.S. gal 71.5 L
Final drives (total) 6.1 U.S. gal 23 L
Hydraulic system 27.2 U.S. gal 103 L
Suspension (total) 2.7 U.S. gal 10.4 L

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics