Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Laughlin, Nevada

Your search for a super quality, personalized construction equipment rental service in Laughlin comes to a satisfactory end here!

With a wide network of trusted vendors and huge, ready-to-rent inventory of construction equipment, right from tools and supplies to heavy machinery, we are in a position to meet your varied needs in as little as one day!

Right after you call us at our toll free number or send a message through contact-form on the right, we will start looking for suitable vendors who’ve the necessary construction equipment. In case you need pick-and-drop services too, we will find vendors who can do the needful.

Throughout the process, our role is and has always been that of an assistance provider that connects contractors in need of heavy machinery and construction tools in Laughlin with the best vendors. The process is very quick and in most cases, you will start receiving calls from vendors we match for your requirements within hours.

Equipment Rental Laughlin, Construction equipment rental Laughlin, Construction Laughlin , Heavy Equipment Rental Laughlin.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

Komatsu Trucks 960E-2

960E-2 Electric Drive Truck

The 3,500 hp Ultra class 960E-2 has the capacity to carry 280 yd3 or 360 tons of material. The AC electric drive system coupled with spin-slide traction control, and 6,000 hp retarding system give the operator the control he needs to maximize the production of this behemoth. The hydropneumatic suspension system helps to keep material in the bed for more production and cleaner haul roads and also give the operator and drive train a softer, more comfortable ride. These trucks have put in millions of hours in mines around the world because of its rugged design which, like all Komatsu trucks and products, use castings in the high stress areas.

Engine
Make and model* Komatsu SSDA18V170
Fuel Diesel
Number of cylinders 18
Operating cycle 4 cycle
Gross horsepower** @ 1900 rpm 3,500 HP 2610 kW
Net flywheel power*** @ 1900 rpm 3,346 HP 2495 kW
Weight (wet) 25,897 lb 11750 kg
Weight (dry) 24,795 lb 11250 kg
*Optional Tier 4 emission compliant engine for North American market. Non-emissionized engine for markets outside of North America.
** Gross horsepower is the output of the engine as installed in this machine, at governed rpm and with engine manufacturer's approved fuel setting. Accessory losses included are water pump, fuel pump and oil pump.
***Net flywheel power is the rated power at the engine flywheel minus the average accessory losses. Accessories include fan and charging alternator. Rating(s) represent net engine performance in accordance with SAE J1349 conditions.
Electric Drive
AC/DC CURRENT
Alternator GTA-39
Dual impeller in-line blower 12,000 cfm 340 m³/min
Control AC Torque Control System
Motorized wheels* GDY108 Induction Traction Motors
Ratio 32.62:1
Speed (maximum) 40 mph 64.5 km/h
* Wheel motor application depends upon gross vehicle weight, haul road grade, haul road length, rolling resistance and other parameters. Komatsu and G.E. must analyze each job condition to assure proper application.
Tires and Rims
Rock service, tubeless, radial tires
Standard tire* 56/80 R63
Flange mount rim:
Rim assembly 41'' x 63'' x 5.5'' 1041 mm x 1600 mm x 140 mm
Rims rated at 758 kPa /110 psi cold inflation pressure
Typical tire weight 65,154 lb 29553 kg
* Tires should meet application requirements for tkph/tmph, tread, compound, inflation pressure, ply rating or equivalent, etc.
Body
All-welded steel flat floor body with horizontal bolsters and full canopy. Eyebrow, rear wheel rock ejectors, body up sling and rubber mounts on frame are standard. Pivot exhaust heating optional.
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.63'' 16 mm
Floor sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.75'' 19 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Outer
0.39' 10 mm
Front sheet
200,000 psi / 1379 mPa tensile strength steel / Center
0.47'' 12 mm
Side sheet
200,000 psi / 1379 mPa tensile strength steel
0.39' 10 mm
Canopy sheet
100,000 psi / 690 mPa tensile strength steel
0.24'' 6 mm
Struck 195 yd3 149 m3
Standard SAE heaped 2:1 280 yd3 214 m3
Standard Komatsu body weight 90,000 lb 40823 kg
Cab
Advanced Operator Environment with integral 4-post ROPS/FOPS Level 2 cab, adjustable air suspension seat w/lumbar support and arm rests, full-size passenger seat, maximum R-value insulation, tilt and telescoping steering wheel, electric windshield wipers w/washer, tinted safety glass, power windows, Komatsu Payload Weighing System, 61,000 Btu/hr heater and defroster, 19,900 Btu/hr air conditioning (HFC - 134A refrigerant)
Frame
Advanced technology, full butt-welded box sectional ladder-type frame with integral ROPS supports, integral front bumper, rear tubular cross members, steel castings at all critical stress transition zones, rugged continuous horsecollar.
Plate material
tensile strength steel
70,000 psi 482.6 mPa
Casting material
tensile strength steel
90,000 psi 620.5 mPa
Rail width 12'' 305 mm
Rail depth (minimum) 34'' 864 mm
Top and bottom plate thickness 1.77'' 45 mm
Side plate thickness / Rear 0.98'' 25 mm
Side plate thickness / Front 1.26'' 32 mm
Drive axle mounting Pin and spherical bushing
Drive axle alignment Swing link between frame and axle
Braking System
Service brakes: oil-cooled, hydraulic-actuated, multiple disc brakes at each wheel. Traction system wheel spin-slide control.
Max. service apply pressure 2750 psi 18960 kPa
Total friction area per brake 16,078 in2 103729 cm2
Emergency brakes Automatically applied prior to hydraulic system pressure dropping below level required to meet secondary stopping requirements.
Wheel brake locks Switch activated
Parking brakes Multiple disc, spring-applied, hydraulically-released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on 15% grade at maximum gross vehicle weight.
Electric dynamic retarder / Continuous 6000 hp 4476 kW
Continuously rated high-density blown grids w/retard capacity at low speeds and retard in reverse propulsion.
Suspension
Variable rate hydro-pneumatic with integral rebound control
Max. front stroke 12.92'' 328 mm
Max. rear stroke 9.40'' 239 mm
Max. rear axle oscillation 6.5°
Cooling System
L&M radiator assembly, split-flow, with deareation-type top tank.
Radiator frontal area 75.5 ft² 7.02 m²
Service Capacities
Cooling System 190 U.S. gal 719 L
Crankcase* 90 U.S. gal 341 L
Hydraulic system 350 U.S. gal 1325 L
Motor gear box (each) 25 U.S. gal 95 L
Fuel 1400 U.S. gal 5300 L
*Includes lube oil filters
Hydraulic System
Steering Accumulator assisted with twin double acting cylinders provide constant rate steering. Secondary steering automatically supplied by accumulator.
Turning circle diameter (SAE) 105'' 32 m
Reservoir 250 U.S. gal 947 L
Filtration In-line replaceable elements
Suction Single, full flow, 100 mesh
Hoist and steering Dual, in-line, high pressure
Brake component cabinet Above deck, easily accessible with diagnostic test connections
Hoist Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening
Hoist times:
Power-up loaded 24 sec
Power-down 14 sec
Float-down empty 28 sec
Pumps Two pumps, single package, end of alternator
Hoist and brake cooling Tandem gear pump with output of 931 lpm / 246 gpm at 1900 rpm and 18960 kPa / 2750 psi
Steering and brake Pressure-compensating piston pump with output of 246 lpm / 65 gpm at 1900 rpm and 20685 kPa / 3,000 psi
System relief pressures:
Hoist and brake cooling 2,500 psi 17237 kPa
Steering and brake 3,000 psi 20685 kPa
Quick disconnects standard for powering disabled truck and for systems diagnostics.
Electrical System
4 x 8D 1450 CCA, 12 volt, in series/parallel, 220-ampere-hour batteries, bumper-mounted with disconnect switch.
Alternator 24 volt, 250 amp
Lighting 24 volt
Cranking motors Two/24 volt
Weight Distribution
Empty vehicle weight:
Front Axle Distribution / 49.5% 272,250 lbs 123490 kg
Rear Axle Distribution / 50.5% 277,750 lbs 125985 kg
Total EVW 550,000 lbs 249475 kg
Gross vehicle weight:
Front Axle Distribution / 33% 419,100 lbs 190104 kg
Rear Axle Distribution / 67% 850,900 lbs 385968 kg
Nominal GVW 1,270,000 lbs 576072 kg
Nominal Payload 720,000 lbs (360 short tons) 326585 kg (327 metric tons )
Nominal payload is defined by Komatsu America Corp's payload policy documentation. In general, the nominal payload must be adjusted for the specific vehicle configuration and site application. The figures above are provided for basic product description purposes
Please contact your Komatsu distributor for specific application requirements.

New Holland Compact Track Loaders C232

Compact Track Loaders C232

THE SUPER BOOM® ADVANTAGE
New Holland's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model FPT / F5H FL413H
Bore/stroke, in (mm) 3.9 x 4.3 (99 x 109)
Displacement, in3 (L) 207 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp (kW) 82 (61) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW) 76 (57) @ 2500 rpm
Peak torque, lb-ft (Nm) 257 (349) @ 1400 rpm
Power Train
Travel speed, low range, mph (km/h) 5.1 (8.2)
Travel speed, high range (optional), mph (km/h) 7.6 (12.2)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 131.1 (3330)
Top of ROPS, in (mm) 80.4 (2043)
Bottom of level bucket, fully raised, in (mm) 124.2 (3155)
Overall length without attachment with coupler, in (mm) 117.8 (2993)
Dump angle, degrees 55
Dump reach (max height), in (mm) 34.4 (875
Rollback, bucket on ground, degrees 33
Rollback, bucket at full height, degrees 85
Track on ground, in (mm) 63.1 (1602)
Ground clearance (bottom of belly pan), in (mm) 9.5 (243)
Angle of departure, degrees 32
Clearance circle without bucket, in (mm) 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Overall width, in (mm) 76 (1930)
Ground pressure, PSI (with spec belt) 4,2
Hydraulic System
Pump flow, gpm (Lpm) 24.2 (91.5)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Relief pressure, psi (bar) 3046 (210)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 3200 (1451)
Rated operating load, 35% tip, lbs (kg) 2240 (1018)
Tipping load, lbs (kg) 6400 (2902)
Breakout force, bucket cylinder, lbs (kN) 4840 (21.5)
Breakout force, bucket cylinder, lbs (kN) 7510 (33.4)
Operating weight, lbs (kg) 9630 (4370)

New Holland Compact Track Loaders C238

Compact Track Loaders C238

THE SUPER BOOM® ADVANTAGE
New Holland Compact Track Loader's patented Super Boom® vertical lift geometry provides maximum reach at the top of the lift curve, making it perfect for loading materials over the side of trucks and placing load in the center of the vehicle.

Engine
Manufacturer/model FPT / F5H FL413CL
Bore/stroke, in (mm) 3.9 x 4.3 (99 x 109)
Displacement, in3 (L) 207 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp
(kW)
90 (67) @ 2500 rpm
Horsepower per SAE J1349 Net hp
(kW)
84 (63) @ 2500 rpm
Peak torque, lb-ft (Nm) 282 (383) @ 1400 rpm
PowerTrain
Travel speed, low range, mph
(km/h)
5.1 (8.2)
Travel speed, high range
(optional), mph (km/h)
7.6 (12.2)
Dimensions
HEIGHT TO
Bucket hinge pin, in (mm) 131.1 (3330)
Top of ROPS, in (mm) 80.4 (2043)
Bottom of level bucket, fully
raised, in (mm)
124.2 (3155)
Overall length without attachment
with coupler, in (mm)
117.6 (2986)
Dump angle, degrees 55
Dump reach (max height), in (mm) 34.4 (875)
Rollback, bucket on ground,
degrees
33
Rollback, bucket at full height,
degrees
85
Track on ground, in (mm) 63.1 (1602)
Ground clearance (bottom of belly
pan), in (mm)
9.5 (243)
Angle of departure, degrees 32
Clearance circle without bucket,
in (mm)
56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Overall width, in (mm) 76 (1930)
Ground pressure, PSI (with spec belt) 4,4
Hydraulic System
Pump flow, gpm (Lpm) 24.2 (91.5)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Relief pressure, psi (bar) 3046 (210)
Performance Specs
Rated operating load, 50% tip, lbs (kg) 13800 (1723)
Rated operating load, 35% tip, lbs (kg) 2660 (1209)
Tipping load, lbs (kg) 7600 (3447)
Breakout force, lift cylinder, lbs (kN) 6110 (27.2)
Breakout force, bucket cylinder, lbs (kN) 7360 (32.7)
Operating weight, lbs (kg) 10,100 (4581)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics