Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Zephyr Cove, Nevada

Your search for a super quality, personalized construction equipment rental service in Zephyr Cove comes to a satisfactory end here!

With a wide network of trusted vendors and huge, ready-to-rent inventory of construction equipment, right from tools and supplies to heavy machinery, we are in a position to meet your varied needs in as little as one day!

Right after you call us at our toll free number or send a message through contact-form on the right, we will start looking for suitable vendors who’ve the necessary construction equipment. In case you need pick-and-drop services too, we will find vendors who can do the needful.

Throughout the process, our role is and has always been that of an assistance provider that connects contractors in need of heavy machinery and construction tools in Zephyr Cove with the best vendors. The process is very quick and in most cases, you will start receiving calls from vendors we match for your requirements within hours.

Equipment Rental Zephyr Cove, Construction equipment rental Zephyr Cove, Construction Zephyr Cove , Heavy Equipment Rental Zephyr Cove.

Unable to parse entered address. API response code: REQUEST_DENIED

Telescopic Boom Lifts 460SJ

JLG Telescopic Boom Lift 460SJ

 

Key Specs

  • Horizontal Outreach: 41 ft / 12.5 m
  • Platform Capacity - Unrestricted: 500 lb / 226.80 kg
  • Platform Height: 46 ft / 14.02 m

Key Features

Power Source
Auxiliary Power 12 Volts DC
Capacity - Fuel Tank 26 gal. / 98.42 L
Engine Type - Diesel DEUTZ D2.9L Tier 4 Final 48.8 hp
Engine Type - Dual Fuel GM Vortec 3000 MPR 82 hp
PERFORMANCE
Drive Speed - 2WD 5 mph / 7.24 km/h
Drive Speed - 4WD 5 mph / 7.24 km/h
Gradeability - 2WD 30 %
Gradeability - 4WD 45 %
Platform Capacity - Restricted 1000 lb / 453.59 kg
Platform Capacity - Unrestricted 500 lb / 226.80 kg
Swing 360 Degrees
Swing Type Continuous
Turning Radius - Outside 16 ft 5 in. / 5 m
dimensional data
Ground Clearance 1 ft 1 in. / 0.32 m
Machine Height 7 ft 10 in. / 2.39 m
Machine Length 29 ft / 8.84 m
Machine Width 7 ft 7 in. / 2.3 m
Platform Dimension A 3 ft / 0.91 m
Platform Dimension B 8 ft / 2.44 m
Platform Height 46 ft / 14.02 m
Tailswing 2 ft 10 in. / 0.86 m
Tire Size 12 x 16.5 Pnuematic
Reach specifications
Horizontal Jib Rotation 0 Degrees
Horizontal Outreach 41 ft / 12.5 m
Platform Height 46 ft / 14.02 m
Vertical Jib Rotation 130 Degrees
general
Capacity - Hydraulic Reservoir 42 gal. / 158.99 L
Ground Bearing Pressure 58 psi / 4.06 Kg/cm2
Machine Weight 15850 lb / 7189.44 kg

Komatsu Excavators PC210LC-10 Super Long Front

PC210LC-10 Super Long Front

Take one of the most popular and productive excavators in the world, add a long front and you've got an incredibly versatile machine with a huge working range. The functions and operations are that of the standard excavator but with a wide variety of ditch cleaning and general purpose buckets for dredging, cleaning and sloping applications.

Notes:
  • The details in this specification brochure are based on Dash 8 and Dash 10 models as indicated. Some attachments may be installed on prior models but specifications may vary. Contact Young Corporation for details.
  • Variations to the specifications in this brochure can be designed and produced in accordance with customer requirements by contacting Young Corporation with details.
  • SUPER LONG FRONT ATTACHMENTS are designed for “LIGHT DUTY" work only. Excavating work or heavy hoisting may result in side loads and other activities that will damage the machine.
  • Disassembly may be required due to transport restrictions.
  • Illustrations may include optional equipment.
  • Operating weights include additional counterweight when required.

Komatsu Excavators PC490LC-10 MH
PC490LC-10 MH Material Handler

If your needs require long reach and high stability in an excavator to handle material with grapples, clams or magnets, the Komatsu Excavators PC490LC-10 material handler has the boom and arm combinations you'll need.

Engine
Model Komatsu SAA6D125E-6-A*
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 4.92" 125 mm
Stroke 5.91" 150 mm
Piston displacement 674 in³ 11.04 ltr
Horsepower
SAE J1995 : Gross 362 HP 270 kW
ISO 9249/SAE J1349 : Net 359 HP 268 kW
Rated rpm 1900 rpm
Fan drive type Hydraulic
Governor All-speed control, electronic.
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydraulic
Type .. HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 184 U.S. gal/min 695 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors: 1 x axial piston motor with swing holding brake
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 5,400 psi 380 kgf/cm² / 37.3 MPa
Swing circuit 4,055 psi 285 kgf/cm²/ 27.9 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 7" x 59" x 5" 177.8 mm x 1499 mm x 127 mm
Arm / 1 7.5" x 78" x 5" 190.5 mm x 1981 mm x 127 mm
Auxiliary pump for generator:
Maximum flow 36.7 gal/min 139 ltr/min
Maximum pressure 3,500 psi 24.2 MPa 246 kg/cm²
Mounting flange SAE-B, 2 bolt
Drive spline 15T-16/32DP
Drives & Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 73,987 lb 329 kN / 33560 kg
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift):
High 3.4 mph 5.5 km/h
Mid 2.6 mph 4.2 km/h
Low 1.9 mph 3.0 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.1 rpm
Swing torque 97,024 ft. lbs. 13414 kg•m
Undercarriage
Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 49 each side
Number of carrier rollers 4 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 172 U.S. gal 650 ltr
Coolant 11.6 U.S. gal 44 ltr
Engine 10.0 U.S. gal 38.0 ltr
Final drive, each side 2.9 U.S. gal 11.0 ltr
Swing drive 5.3 U.S. gal 20 ltr
Hydraulic tank 65.5 U.S. gal 248 ltr
Hydraulic system 124.7 U.S. gal 472 ltr
Operating Weight (approximate)
Operating weight without work tool (approximate)
Operating weight includes KO2US55 2-piece 16.8 m / 55' front, counterweight for MH 12317 kg / 27,450 lb, widen carbody, 78" cab riser, 25kw generator, rated capacities of lubricants, coolant, full fuel tank, operator and standard equipment.
Triple-Grouser Shoes 28" 700 mm
Operating Weight 126,530 lb 57410 kg
Ground Pressure 13.4 psi 0.94 kg/cm²
Triple-Grouser Shoes 31.5'' 800 mm
Operating Weight: 127,630 lb 57910 kg
Ground Pressure 11.8 psi 0.83 kg/cm²
Triple-Grouser Shoes 35.5" 900 mm
Operating Weight: 128,710 lb 58400 kg
Ground Pressure 10.6 psi 0.74 kg/cm²
For KOUS54 3-piece 16.5 m 54' front, add weight 105 kg 230 lb

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics