Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Fitzwilliam, New-Hampshire

We are fully committed to providing high-value construction equipment rental solutions to our customers in Fitzwilliam.

Since we believe in nurturing long time relationships with contractors and companies who approach us when they are looking for vendors, we always take onboard rental service providers we know maintain a fleet of high quality machines. From excavators and backhoes to heavy drilling equipment, air compressors, scaffolding, etc., you can get just about everything you need for at your jobsite.

Feel free to dial our toll free number any time and ask any number of questions pertaining to the fleet of heavy construction machinery available in Fitzwilliam, the rental process and availability of equipment transportation services.

You may also contact us by filling up the short contact form on the right. When we get back to you for a quick discussion or when our vendors call you, do not hesitate to ask about the machines/tools available, equipment condition, or anything else.

Equipment Rental Fitzwilliam, Construction equipment rental Fitzwilliam, Construction Fitzwilliam, Heavy Equipment Rental Fitzwilliam.

JCB Light Equipment VMP 14

VMP 14

The JCB VMP 14 reversible plate compactor is heavier, wider and more powerful than the VMP 8. It's still hydrostatically operated and designed for use on granular and cohesive material. The VMP 14 weighs 135 kg (68% more) and power is provided by a 3.1 kW Hatz engine. Working width is 425 mm and centrifugal force is 56% improved at 25 kN.

There are reversing and stationary features for confined areas and all directional control is lever-operated. The engine is shock-mounted and vibrator bearings are lifetime-lubricated for durability. Added to that is a wear-resistant, high-grade cast damping plate and a roll cage that doubles as a lifting bail.

For operator comfort, specially balanced and isolated guide bars protect hands and arms from excessive vibrations. Finally, there's a built-in device for attaching a vulcolan paving mat (an optional extra item for compacting paving stones and similar material).

Compaction Performance
Operating Weight 135kg
Plate Width 425mm
Engine
Maximum Engine Power 3.1kW

Komatsu Wheel Loaders WA900-3
WA900-3 Wheel Loader

Power, stability and maneuverability. That's what you get with the 17.0 yd3, 856 hp, WA900-3. High stability when digging in the pile and when maneuvering, the WA900-3 is a production loader that can exceed your demands. Using the advanced joystick steering, the operator has the precise control and nimble feel to make him think he's operating a loader half its size.

Engine
Model Komatsu SAA12V140E-3
Type Water-cooled, 4 cycle
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 12
Bore x stroke 5.51'' x 6.50'' 140 mm x 165 mm
Piston displacement 1,860 in³ 30.48 ltr
Governor all-speed, electronic
Flywheel horsepower
SAE J1995 - Gross 900 HP 672 kW
ISO 9249/SAE J1349 - Net 856 PS 638 kW
Rated rpm 2050 rpm
Fan drive method for radiator cooling Mechanical
Fuel system Direct injection
Lubrication system
Method Gear pump, force-lubrication
Filter Full-flow and bypass combined
Air cleaner Dry type with automatic dust ejector and pre-cleaner, cyclopac with vacuator
EPA Tier 2 emissions certified.
Transmission
Torque converter - Type 3-element, single-stage, single-phase
Transmission - Type Full-powershift, planetary type
Travel Speed*
1st Forward 4.3 mph 7.0 km/h
1st Reverse 4.4 mph 7.1 km/h
2nd Forward 7.6 mph 12.3 km/h
2nd Reverse 7.7 mph 12.4 km/h
3rd Forward 17.4 mph 28.0 km/h
3rd Reverse 17.6 mph 28.3 km/h
*Measured with 45/65-45, 58 PR (L-5)
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, full-floating
Rear Center-pin support, full-floating, 22° total oscillation
Reduction gear Spiral bevel gear
Differential gear Straight bevel gear
Final reduction gear Planetary gear, single reduction, oil bath
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Dry disc brake
Secondary brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 40° each direction
Minimum turning radius at the center of outside tire 30'2" 9200 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity / at rated rpm 83.2 U.S. gal/min 315 ltr/min
Relief valve setting 4,977 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders 2
Bore x stroke 6.3" x 19.8" 160 mm x 503 mm
Loader control:
Hydraulic pump Piston pump
Capacity / at rated rpm 109.6 U.S. gal/min 415 ltr/min
Relief valve setting 4,977 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders—bore x stroke:
Boom cylinder - 2 10.2" x 53.9" 260 mm x 1368 mm
Bucket cylinder - 1 11.8" x 35.7" 300 mm x 906 mm
Control valve spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 11.2 sec
Dump 2.0 sec
Lower (Empty) 4.8 sec

Service Refill Capacities

ROPS and Cab
The cab is mounted on viscous damping mounts and is well insulated.
Cooling system 89.0 U.S. gal 337 ltr
Fuel tank 410.8 U.S. gal 1555 ltr
Engine 34.3 U.S. gal 130 ltr
Hydraulic system 191.5 U.S. gal 725 ltr
Axle (each front and rear) 95.1 U.S. gal 360 ltr
Torque converter and transmission 37.0 U.S. gal 140 ltr

Komatsu Wheel Loaders WA470-7
WA470-7 Wheel Loader

The WA470-7 scores high marks for economy and power at the same time. Komatsu's Tier 4 interim technology ensures that the engine runs efficiently and saves fuel over the previous model. Selectable economy or power engine modes and SmartLoader Logic make sure the WA470-7 can be operated in the most efficient way. A large capacity torque converter with lock-up gives the WA470-7 tremendous power in the pile for filling the bucket and speed to climb ramps.

Engine
Model Komatsu SAA6D125E-6*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.9" x 5.9" 125 mm x 150 mm
Piston displacement 674 in³ 11.04 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 273 HP 204 kW
ISO 9249/SAE J1349 / Net 272 HP 203 kW
Rated rpm 2000 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Automatic, full-poweshift, counter-shaft type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.7 mph
7.6 km/h
4.9 mph
7.9 km/h
2nd gear 8.1 mph
13.1 km/h
8.4 mph
13.5 km/h
2nd gear (Lock-up clutch ON) 8.2 mph
13.2 km/h
8.5 mph
13.7 km/h
3rd gear 14.2 mph
22.9 km/h
14.7 mph
23.6 km/h
3rd gear (Lock-up clutch ON) 14.7 mph
23.6 km/h
15.1 mph
24.3 km/h
4th gear 22.5 mph
36.2 km/h
23.2 mph
37.3 km/h
4th gear (Lock-up clutch ON) 23.8 mph
38.3 km/h
24.2 mph
39.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake* Wet disc brake
*May be used in an emergency
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 35° each direction (40° to max end stop)
Minimum turning radius at the center of outside tire 21'9" 6630 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity 51.5 U.S. gal/min 195 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.5" x 17.3" 90 mm x 441 mm
Loader control:
Hydraulic pump Piston pump
Capacity 68.7 U.S. gal/min 260 ltr/min
Relief valve setting 4,980 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders—bore x stroke:
Boom cylinder — 2 5.5" x 30.0" 140 mm x 764 mm
Bucket cylinder — 1 6.3" x 22.6" 160 mm x 575 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket)
Raise 6.1 s
Dump 1.6 sec
Lower (Empty) 3.1 sec
Service Refill Capacities
Cooling system 21.1 U.S. gal 80 ltr
Fuel tank 100.4 U.S. gal 380 ltr
Engine 10.0 U.S. gal 38 ltr
Hydraulic system 45.7 U.S. gal 173 ltr
Axle front 15.1 U.S. gal 57 ltr
Axle rear 14.8 U.S. gal 56 ltr
Torque converter and transmission 17.2 U.S. gal 65 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics