Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in East Rutherford, New-Jersey

We represent one of the most trustworthy groups of vendors that offer heavy construction equipment rentals in East Rutherford. Daily rentals or long term rentals, we’ve got you covered for all your commercial or residential construction project requirements.

We do not directly provide any support for the equipment we help you source through construction equipment rental services in East Rutherford but yes, we do try our level best to help you find the best vendors with well-maintained fleet of machines.

Our service makes it easy for you to find trustworthy vendors, who feature the latest technology, phase out old equipment on a regular basis and only supply high performance, work-ready construction equipment.

Call our toll free number today and speak to one of our courteous and knowledgeable support staff members.

You can also submit an online query right away through the contact form (on the right).

Equipment Rental East Rutherford, Construction equipment rental East Rutherford, Construction East Rutherford, Heavy Equipment Rental East Rutherford.

Komatsu Excavators PC290LC-11
PC290LC-11 Hydraulic Excavator

A long reach arm and boom combined with a heavy duty undercarriage provide extended reach with a stable and reliable platform.
Enhanced controller logic and new Tier 4 Final engine technology improve performance and fuel efficiency.

Engine
Model Komatsu SAA6D107E-3*
Type Water-cooled, 4-cycle, direct injection
Aspiration Komatsu variable geometry turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 107 mm 4.21''
Stroke 124 mm 4.88''
Piston displacement 6.69 ltr 408 in³
Horsepower: All-speed, electronic
SAE J1995 : Gross 159 kW 213 HP
ISO 9249/SAE J1349 : Net 147 kW 196 HP
Rated rpm 2050 rpm
Fan drive type Mechanical
Governor All-speed control, electronic.
*EPA Tier 4 Final emissions certified
Hydraulics System
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 479 ltr/min 126.5 U.S. gal/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 380 kgf/cm²/ 37.3 MPa 5,400 psi
Travel circuit 380 kgf/cm² / 37.3 MPa 5,400 psi
Swing circuit 295 kgf/cm²/ 28.9 MPa 4,190 psi
Pilot circuit 33 kgf/cm² / 3.2 MPa 470 psi
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 140 mm x 1300 mm x 100 mm 5.5" x 51.2" x 3.9"
Arm / 1 150 mm x 1635 mm x 110 mm 5.9" x 64.3" x 4.3"
Bucket / 1 140 mm x 1009 mm x 100 mm 5.5" x 39.7" x 3.9"
Drives & Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 249 kN / 25400 kg 56,000 lb
Gradeability 70% 35°
Maximum travel speed: (Auto-Shift)
High 5.5 km/h 3.4 mph
Mid 4.1 km/h 2.5 mph
Low 3.0 km/h 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Driven method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 10.5 rpm
Swing torque 8889 kg•m 64,292 ft lbs
Undercarriage
Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 400 ltr 105.7 U.S. gal
Coolant 36 ltr 9.5 U.S. gal
Engine 23.1 ltr 6.1 U.S. gal
Final drive, each side 8.5 ltr 2.2 U.S. gal
Swing drive 7.2 ltr 1.9 U.S. gal
Hydraulic tank 132 ltr 34.9 U.S. gal
Hydraulic system 250 ltr 66.0 U.S. gal
DEF tank 23.0 ltr 6.07 U.S. gal
Operating Weight (approximate)
Operating weight, including 6150 mm 20'2" one-piece boom, 3200 mm 10'6" arm, SAE heaped 1.41 m³ 1.85 yd³ backhoe bucket*, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Shoes 700 mm 28"
Operating Weight 30570 kg 67,395 lb
Ground Pressure 0.54 kg/cm² 7.71 psi
Shoes 800 mm 31.5''
Operating Weight: 30950 kg 68,233 lb
Ground Pressure 0.48 kg/cm² 6.83 psi
Shoes 850 mm 33.5"
Operating Weight: 31141 kg 68,654 lb
Ground Pressure 0.45 kg/cm² 6.47 psi
Component Weights
Arm including bucket cylinder and linkage
3200 mm 10'6" arm assembly 1432 kg 3,157 lb
3500 mm 11'6" arm assembly 1504 kg 3,316 lb
One piece boom including arm cylinder
6150 mm 20'2" boom asssembly 2448 kg 5,397 lb
Boom cylinders x 2 231 kg 509 lb
Counterweight 5510 kg 12,148 lb
1.41 m³ 1.85 yd³ bucket - 48" width 1088 kg 2,399 lb

JCB Backhoe Loaders 3CX 14 SUPER

3CX 14 SUPER

The JCB 3CX 14 Super is the world's number one backhoe loader (along with the JCB 4CX Super). The 3CX 14 Super is a product of JCB's efficient design philosophy, responding to today's rising fuel prices and environmental concerns with class-leading efficiency and low running costs. In short, we've applied innovative technologies to squeeze the absolute maximum out of every drop of fuel on the JCB 3CX 14 Super.

The result? In typical roading, loading, excavating and idle cycles, the 3CX 14 Super JCB backhoe loader, equipped with a powerful 91 hp (68 kW) EcoMAX engine, delivers an average fuel saving of up to 16%, plus lower emissions and noise levels. And, with extended periods between fill ups, you benefit from a longer, more productive working day.

But the efficiency (and other) benefits certainly don't end there on a JCB 3CX 14 Super.

Machine Specification
Engine Model EcoMAX T4i
Gross Engine Power 91hp (68kW)
Operating Weight
Peak Torque 516Nm (320lbf)
Pump Flow
Steer Mode 2WS
Backhoe Specification
Bucket Rotation (Speed) 201°
Dig Depth (ret/ext) 13' 11" (4250mm) / 17' 11" (5460mm)
Maximum Bucket Tearout 6228kgf (13730lbf)
Maximum Dipper Tearout (ret/ext) 3903kgf (8605lbf) / 2733kgf (6027lbf)
Maximum Loader Height (ret/ext) 11' 2" (3400mm) / 14' 0" (4270mm)
Loader Specification
Load Over Height (6-in-1) 10' 8" (3200mm)
Loader Breakout 4732kgf (10432lbf)
Maximum Shovel Breakout 6531kgf (14398lbf)
Shovel Capacity

Komatsu Excavators PC210LC-10 Super Long Front

PC210LC-10 Super Long Front

Take one of the most popular and productive excavators in the world, add a long front and you've got an incredibly versatile machine with a huge working range. The functions and operations are that of the standard excavator but with a wide variety of ditch cleaning and general purpose buckets for dredging, cleaning and sloping applications.

Notes:
  • The details in this specification brochure are based on Dash 8 and Dash 10 models as indicated. Some attachments may be installed on prior models but specifications may vary. Contact Young Corporation for details.
  • Variations to the specifications in this brochure can be designed and produced in accordance with customer requirements by contacting Young Corporation with details.
  • SUPER LONG FRONT ATTACHMENTS are designed for “LIGHT DUTY" work only. Excavating work or heavy hoisting may result in side loads and other activities that will damage the machine.
  • Disassembly may be required due to transport restrictions.
  • Illustrations may include optional equipment.
  • Operating weights include additional counterweight when required.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics