Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Blue Mountain Lake, New-York

For a long time now, we’ve concentrated on building relationships based on trust, loyalty, integrity and mutual respect in the local construction industry. It is this straightforward approach to business that makes us a preferred network for construction equipment rentals in the region.

We know that you need the latest heavy construction equipment on rent without getting into a lengthy and complex contract. So, our vendors provide you with the flexible option of daily, weekly and monthly rentals. You need not worry about transportation, length of contract or maintenance (unlike how it is in case of leasing).

The equipment or machinery would be transported to the jobsite within a day or two, and picked up by our vendors. However, if you’d rather choose, you can handle transportation on your own.

Dial our toll free number or submit the quick contact form on the right to get in touch with the best vendors.

Equipment Rental Blue Mountain Lake, Construction equipment rental Blue Mountain Lake, Construction Blue Mountain Lake, Heavy Equipment Rental Blue Mountain Lake.

JCB Light Equipment Hydraulic Reversible Drill

Impact Wrench

The JCB 3/4in and 1in drive impact wrenches provide extra power and torque for heavy-duty jobs. This powerful, efficient, reversible tool is ideal for general tightening or untightening duties.

    • 2700 RPM
    • Weight 5.6 kg
    • Adjustable torque control
    • Twin hammer design
    • Needle bearing, rugged gear motor design for long life

Komatsu Trucks HM400-3
HM400-3 Articulated Truck

The 44 ton capacity HM400-3 has a Tier 4 interim Komatsu engine which, combine with other energy saving improvements, can reduce fuel consumption up to 14%. The Komatsu Traction Control System ensures that a loaded HM400-3 will be able to pull through the most severe underfoot conditions. The operator can choose between Economy and Power modes to further tailor his machine performance to the job at hand. Among the cab improvements are a forward facing training seat and separate screen for the rear view camera.

Engine
Model Komatsu SAA6D140E-6*
Type Water-cooled, 4-cycle
Aspiration Komatsu variable geometry, turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.5" 165 mm
Piston displacement 928 in3 15.24 ltr
Horsepower :
SAE J1995 473 HP 353 kW
ISO 9249 / SAE J1349 469 HP 350 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Maximum torque 1669 ft lbs 2263 Nユm
231 kgユm
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner (cyclonpack type), plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 34.7 mph 55.9 km/h
Axles
Full time all wheel drive
Final drive type Planetary gear
Ratios:
Differential 3.727
Planetary 4.941
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Standard ISO5010, SAE J1511
Minimum turning radius, wall to wall 28' 10" 8.8 m
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 23.8 yd3 18.2 m3
Heaped (2:1, SAE) 31.4 yd3 24 m3
Payload 44.1 U.S. tons 40 metric tons
Material - high tensile strength steel 184,925 psi 30 kg/mm2
Material thickness:
Bottom 0.55" 14 mm
Front 0.31" 8 mm
Sides 0.47" 12 mm
Target area - (inside length x width) 18' 7" x 10' 6" 5667 mm x 3194 mm
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 4264 psi 275 kg/cm2 / 27 Mpa
Hoist time 12.0 sec
Weight (approximate)
Empty weight 74,207 lbs 33,660 kg
Gross vehicle weight 162,569 lbs 73,740 kg
Weight distribution:
Empty:
Front axle 56.4%
Center axle 22.5%
Rear axles 21.1%
Loaded:
Front axle 29.4%
Center axle 35.4%
Rear axles 35.2%
Tires
Standard tire 29.5 R25
Service Refill Capacities
Fuel tank 136.8 U.S. gal 518 L
Engine oil 9.3 U.S. gal 35 L
Torque converter, transmission and retarder cooling 33 U.S. gal 125 L
Differentials (total) 28.5 U.S. gal 108 L
Final drives (total) 8.5 U.S. gal 32 L
Hydraulic system 44.1 U.S. gal 167 L
Suspension (total) 5.7 U.S. gal 21.4 L

JCB Light Equipment HM25

HM25

This popular and powerful high output breaker is perfect for use with the JCB Beaver Powerpack

    • 22 l/min max flow rate
    • Weight 26 kg
    • Vibration (BS8622-5) 4 m/s2
    • Vibro damped handle provides one of the lowest vibration levels of any equivalent breaker
    • Sealed hydraulic system results in low noise (no exhaust port) and elimination of freezing problems
    • Very robust cast steel construction for maximum strength and durabilit
    • High reliability and long service life - only two moving parts and constant lubrication by hydraulic oil

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics