Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Creswell, North-Carolina

We have been a preferred choice for numerous contractors in the region for we make it a point to deliver valuable service, every time. Why contractors choose our vendors for construction equipment rentals in Creswell .

  • The equipment is updated on a regular basis; old machines are sold as used equipment and replaced with new equipment fleet
  • Any heavy construction equipment you need can be delivered directly at the jobsite; the entire process is quick and hassle free
  • Since all machines and tools are in good condition, you can start using them the moment they are assembled or delivered at the site

Our vendors are experts at matching the right construction equipment to a given project. Dial our toll free number today and learn about their fleet today!

You can also submit an online query through the contact form (on the right) if you cannot call right now.

Equipment Rental Creswell, Construction equipment rental Creswell, Construction Creswell, Heavy Equipment Rental Creswell.

Unable to parse entered address. API response code: OVER_QUERY_LIMIT

Toyota Forklift 8FGC45U BCS

8 Series Large Capacity-8FGC45U-BCS

Cushion Tire Paper Roll Special

  • 12,000 lbs. Lifting Capacity
  • LPG
  • System of Active StabilityTM (SAS)

With our new 8-Series Forklifts, Toyota brings heavy-duty performance to the paper industry. Up to 15,500-pounds strong. Thicker, fully stamped-steel side panels. Plate-iron front fenders. The 8-Series can handle anything your factory can dish out. And, thanks to Toyota-built engines, do so with an impressive 20% more fuel efficiency.

ERGONOMICS
  • Newly designed operator assist grips accommodate thicker gloves.
  • Four-way adjustable seat slides six inches, allowing operators to select the perfect position for a comfortable day on the job.
  • Lower entry step provides ample foot room by placing the tilt cylinders underneath the floorboard.
PARFORMANCE
  • Powered by a 3.7 liter, 4-cylinder gas engine, the 8-Series provides improved horsepower and torque compared to the V6 on prior models.
  • 4-cylinder gas engine consumes up to 20% less fuel than previous models
  • Economy (ECO) mode option optimizes the acceleration rate with no loss of power, helping improve truck runtime over the course of theworkday.
  • Electronic fuel injection helps provide precise fuel control and greater reliability with Controller Area Network (CAN-bus) technology.
  • Travel Speed Control lets plant managers limit the top speed of the forklift without reducing performance of hydraulic functions.
EASE OF SERVICE
  • Integrated monitoring system for quicker, easier servicing
  • Easy-lift hood with automatic assist damper to provide quick and easy access to engine
  • No-tool floorboard removes in seconds for quicker servicing
  • Swing-Out or optional Swing-Down (Toyota exclusive) LPG tank bracket makes switching tanks quick and easy
SAFETY
  • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tipovers
  • When it senses instability, the Active Control Rear Stabilizer locks the rear axle to help prevent lateral tipovers
  • Active Mast Function Controller senses and controls mast angle and rear tilt speed according to the load's height and weight
DURABILITY
  • Engine protection system automatically reduces engine's output if coolant temperature rises to potentially damaging levels.
  • Moisture-resistant electrical connectors are less susceptible to water intrusion and corrosion caused by high-moisture, humid environments.
  • External hydraulic oil cooler provides greater hydraulic component life and reduces downtime.
  • Optimized radiator and counterweight design combine to ensure maximum airflow for superior cooling.
  • Fewer trim pieces and reinforced metal plates keep maintenance costs down.
  • Redesigned side panels, formed from fully stamped steel plates, are our most rigid yet to extend the life of the chassis.
PAPER ROLL HANDLER
  • Clamp release interlock system ensures safe clamp operation by preventing accidental activation of the release lever.
  • Paper Roll Special model is ready-made for specialized railcar and truck loading and unloading operations.
  • Large number 8 gauge hosing increases attachment efficiency and reduces hydraulic system temperatures.
  • Automatic clamp leveling feature allows the operator to level the paper roll clamp with the touch of a button. And our optional hydraulicaccumulator helps prevent common roll damage such as scuffing and out-of-roundness.
  • Optimized hydraulic system allows for correct pressure and flow for most clamps.
  • Electronically adjustable hydraulic control valve optimizes clamp roll operation with built-in pressure and flow control.
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.)
8FGC45U-BCS 10,000 84/2350 11.8 98 37 106

Toyota Forklifts 8FBCU30

8-Series Electric Motor Forklift-8FBCU30

4-Wheel Cushion

  • 4,000-6,500 lb. Lifting Capacity

Once again, Toyota ingenuity and design have come together to create the revolutionary 8-Series 4-wheel electric forklift with the AC (Alternating Current) drive system. Yet the AC drive motor isn't the only milestone component driving these products. Toyota's exclusive System of Active StabilityTM (SAS) shares the spotlight. These two industry-leading technologies combine to elevate operator productivity and workplace safety to unprecedented levels. Check out some of the features below to learn more about these great trucks, and don't forget to visit your authorized Toyota Industrial Equipment dealer to get a demonstration!

ERGONOMICS
  • Curvilinear overhead guard legs provide a wider opening for operator entry/exit.
  • Electric shift lever offers easily accessible fingertip control for fast and easy directional changes.
  • Automotive style light switch and turn signal levers are integrated into the slim profile steer column for easy accessibility and simple operation.
  • 12-inch-long dual operator assist grips have been designed to meet the needs of varying operator sizes and are in line with the overhead guard pillars for improved operator peripheral vision.
  • Low profile front cowl results in enhanced forward visibility and lessens back strain by reducing the need for the operator to lean forward to view load and fork tips.
  • Foot-activated parking brake further lessens operator back strain by reducing the need to lean forward to activate and disengage parking brake. Foot brake location also eliminates clutter from cowl area, enhancing forward visibility.
  • Overly spacious legroom provides unsurpassed comfort levels throughout the operator's work shift.
  • Heavy-duty, non-slip floor mat adds to this comfort by minimizing noise, heat and vibration.
  • EZ Pedal option allows operators to quickly and easily change travel direction without removing a hand from the steering wheel or hydraulic controls.
  • Mini-lever or joystick hydraulic controls with Ergo-Shift feature a three-way adjustable armrest to enhance operator comfort and productivity.
  • High mount key switch and parking brake release lever have been strategically placed to minimize the need for an operator to lean forward in the seat.
  • Cowl-mounted hydraulic levers are ergonomically situated for improved operator comfort and unobstructed entry/exit from the right side of the truck.
EASE OF SERVICE
  • AC Motors have no brushes, springs, commutator or wearable parts to service and replace, resulting in fewer, quicker and less expensive maintenance needs.
  • On-demand, full hydrostatic power steering is controlled through the AC hydraulic motor system, eliminating an additional motor to service.
  • No-tool floorboard lifts out in seconds for fast, easy access during daily operator checks.
  • Fault code memory with hour meter reading displays forklift history to simplify troubleshooting.
  • Battery roll- and slide-out options with redesigned battery retaining system are available for easy battery replacement.
  • Curved front fenders with redesigned tie-down hooks offer improved security while shipping the unit.
  • Analyzer Mode displays the status of the electrical system and allows instantaneous access to information on errors detected by the controller.
  • Self-diagnostics with built-in analyzer capabilities are offered through the optional multifunction digital display, eliminating the need for a hand-held analyzer.
  • Planned maintenance hour meter notifies operators of the need for routine maintenance and service via the digital display monitor. The service intervals are programmable.
  • Right-side panel provides reliable protection and easy service access to the hydraulic motor.
SAFETY
  • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tipovers
  • When it senses instability, the Active Control Rear Stabilizer locks the rear axle to help prevent lateral tipovers
  • Active Mast Function Controller senses and controls mast angle and rear tilt speed according to the load's height and weight
PRODUCTIVITY
  • AC powered system offers fast response to operating commands, precise power control, compact components and higher levels of productivity throughout the entire work shift.
  • AC drive motor offers quicker acceleration, higher top speeds and smoother direction changes to help operators move more pallets per hour.
  • AC lift motor features fully variable lift/lower control for fast, precise pallet retrieval or positioning.
  • On-demand, full hydrostatic power steering offers low-effort control while providing precise maneuverability and load handling in confined work areas.
  • Programmable performance parameters may be customized through the digital display to adjust to a variety of job applications and operator skill levels.
  • Momentary hold and controlled descent feature maximizes forklift control when the accelerator pedal is released on a grade by regulating rolling speed.
  • Touch-pad, keyless entry system with password protection option allows only designated personnel to operate the equipment.
  • Tuning mode is used to make fine adjustments in the traveling and material handling features in order to customize the performance parameters for individual operators and varying applications.
  • Power keep function allows the 8-Series' AC motors continue to perform at productive levels even when the battery charge is low.
PROGRAMMABILITY
  • Multifunction digital display with illuminated icons informs the operator of vital operating information for maximum uptime.
  • Performance parameters may be customized through the digital display to adjust to a variety of job applications and operator skill levels.
  • Pre-set performance parameters (S.P.H.) are available for simpler truck performance customization.
  • Multifunction hour meters allow for planned maintenance scheduling and the ability to perform time and motion studies.
  • Programmable battery discharge indicator enables customization of the truck's battery discharge settings to closer match the battery's discharge rate, helping to maintain proper battery life.
  • Battery discharge indicator with lift interrupt prolongs battery life.
  • Auto-Off System is seat-activated and programmable to conserve battery power.
  • Power select indicator displays the mode currently in operation by highlighting either S (savings), P (performance) or H (high performance).
  • Auto height select option allows operators to program the forklift to automatically stop the forks at pre-determined rack heights to maximize productivity.
OPTIONS
Compact Battery Compartment Option

  • Available on 4-Wheel AC electric 4,000 and 5,000 lb. models.
  • Suited for customers that have narrow aisles.
  • Benefits customers that demand shorter, more compact forklifts to increase their productivity.
  • Warehouse and Distribution Centers, Food Distribution and Food Manufacturing are industries that will benefit from this option.
SPECIFICATION CHART
Model Load Capacity* (lbs.) Voltage (V) Maximum Travel Speed Full Load Cushion Tire(m.p.h.) Maximum Travel Speed Full Load Pneumatic Tire(f.p.m.) Maximum Gradeability Full Load 3 Min. Rating(%) Basic Right Angle Stack** (in.)
8FBCU30 6,000 36/48 9.0/11.2 51/69 17 94.9

Toyota forklifts 8FG70U

8-Series Internal Combustion Pneumatic Tier Forklift-8FG70U

Large Capacity Pneumatic Tire

Toyota's highly anticipated line of 8-Series Large Capacity Pneumatic forklifts are now available in 8,000-17,500 lb. internal combustion pneumatic tire models. These trucks offer significant advancements in durability, ergonomics, productivity and fuel cost savings.

ERGONOMICS
  • 11.8 diameter two spoke steering wheel provides greater legroom for operator.
  • Cowl-mounted hydraulic levers are ergonomically situated for improved operator comfort and unobstructed entry and exit from the right side of thetruck.
  • 12 inch long dual operator assist grips have been designed to meet the needs of varying operator sizes.
  • Low profile front cowl results in enhanced forward visibility and lessens back pain by reducing the need of the operator to lean forward to view load andfor tips.
PARFORMANCE
  • Toyota's 3.0 liter 4-cylinder engine with intercooled variable nozzle turbocharger and diesel oxidation catalyst meets the EPA Tier 4 final standard.
  • Toyota's new advanced engine provides optimal power with up to 30% reduced fuel consumption.
  • Independent brake and inching control pedals provide excellent stopping power and precise positioning of the forklift.
  • Automatic fork leveling improves operator efficiency and productivity while reducing product damage.
EASE OF SERVICE
  • Easy-lift hood with automatic assist damper to provide quick and easy access to engine
  • No-tool floorboard removes in seconds for quicker servicing
  • Brake fluid level check is conveniently mounted on the cowl for quick reference to expedite routine maintenance.
SAFETY
  • Toyota SAS monitors key forklift operations, detecting and counteracting instability to help reduce the risk of tip overs
  • When it senses instability, the Active Control Rear Stabilizer locks the rear axle to help prevent lateral tip overs
  • Active Mast Function Controller senses and controls mast angle and rear tilt speed according to the load's height and weight
DURABILITY
  • Control Area Network (CAN-bus) communication provides quicker, more reliable control of the truck functions with fewer components.
  • Fully stamped steel side panels are thick to help withstand the harshest environments.
  • Moisture-resistant electrical connections are less susceptible to water intrusion and corrosion caused from pressure washing and high moistureenvironments.
  • Stamped steel engine hood provides maximum durability.
SPECIFICATION CHART
Model Load Capacity* (lbs.) Engine HP/rpm net (SAE-HP) Maximum Travel Speed Full Load (m.p.h.) Maximum Lift Speed Full Load (f.p.m.) Maximum Gradeability Full Load(%) Basic Right Angle Stack** (in.)
8FG70U 15,500 89/2600 11.8 81 30 152

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics