Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Denton, North-Carolina

We have been a preferred choice for numerous contractors in the region for we make it a point to deliver valuable service, every time. Why contractors choose our vendors for construction equipment rentals in Denton .

  • The equipment is updated on a regular basis; old machines are sold as used equipment and replaced with new equipment fleet
  • Any heavy construction equipment you need can be delivered directly at the jobsite; the entire process is quick and hassle free
  • Since all machines and tools are in good condition, you can start using them the moment they are assembled or delivered at the site

Our vendors are experts at matching the right construction equipment to a given project. Dial our toll free number today and learn about their fleet today!

You can also submit an online query through the contact form (on the right) if you cannot call right now.

Equipment Rental Denton, Construction equipment rental Denton, Construction Denton, Heavy Equipment Rental Denton.

KKomatsu Dozers D39PX-23
D39PXi-23 Crawler Dozer
iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 in³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 107 HP 79 kW
ISO 9249 / SAE J1349 - Net 105 HP 78 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated two stage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed.

Minimum turning radius* 87" 2.2 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid type
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Number of track rollers (each side) 6
Type of shoes (standard) Single grouser
Number of shoes (each side) 39
Grouser height 2.1" 53 mm
Shoe width (standard) 20" 510 mm
Ground contact area 3,731 in 24072 cm²
Ground pressure
(with dozer, ROPS cab)
5.64 psi 0.40 kgf/cm² / 38.9 kPa
Track gauge 5'4" 1620 mm
Length of track on ground 7'9" 2360 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 15.8 U.S. gal 60 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab 18,387 lb 8340 kg
Operating weight: Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab 20,922 lb 9490 kg
hydraulic system
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.  
Positions:  
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower

JCB Light Equipment FP 1030W

FP 1550W

Uprated from the JCB FP1540W forward vibratory plate, the FP1550W weighs 100 kg and is powered by a 3.6 kW Honda engine. Centrifugal force is 15 kN. The FP1550W is specifically designed for easy, effective compaction of asphalt, soil and other less cohesive materials.

Built for Low hand and arm vibration levels and high productivity, the FP1550W features a wear-resistant high-grade cast tamping plate for optimum durability.

It also has an oil bath lubrication system to protect its vibration bearings, shock mounts for the engine and a roll cage that also acts as a lifting bail.

The FP1550W is designed for fast travel and ultimate productivity. The options list consists of transport wheels, a water sprinkler system and rubber paving stone pads.

Compaction Performance
Operating Weight 100kg
Plate Width 500mm
Engine
Maximum Engine Power 3.6kW

Komatsu Dozers D65WX-17

D65WX-17 Crawler Dozer

The wide track D65WX-17 has all the same great features as the D65 E and P machines but uses the standard length track of the EX with the wider track of the LGP PX. The D65WX gives the extra stability some applications such as slope work require without having to go to a low ground pressure shoe. The D65WX-17 can be equipped with the inside mount power angle tilt blade or the outside mount Sigma.

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics