get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Pantego, North-Carolina

We have been a preferred choice for numerous contractors in the region for we make it a point to deliver valuable service, every time. Why contractors choose our vendors for construction equipment rentals in Pantego .

  • The equipment is updated on a regular basis; old machines are sold as used equipment and replaced with new equipment fleet
  • Any heavy construction equipment you need can be delivered directly at the jobsite; the entire process is quick and hassle free
  • Since all machines and tools are in good condition, you can start using them the moment they are assembled or delivered at the site

Our vendors are experts at matching the right construction equipment to a given project. Dial our toll free number today and learn about their fleet today!

You can also submit an online query through the contact form (on the right) if you cannot call right now.

Equipment Rental Pantego, Construction equipment rental Pantego, Construction Pantego, Heavy Equipment Rental Pantego.

Unable to parse entered address. API response code: REQUEST_DENIED

JCB Wheel Loaders 437

437

The JCB 437 is designed to maximize efficiency and, with it, productivity. As such, it'll save you time, money and a whole lot more. Built using the finest components - a Cummins engine, ZF transmissions and axles, and Rexroth pumps - the 437 will last the distance. And, with 173hp (129kW), 591lbf (801Nm) and a 69 gal/min (264 l/min) hydraulic circulation, it'll perform to the max throughout. It's all-day comfortable - a comfortable operator is, after all, a productive one. It's also safe, serviceable and, with features like Eco mode and Auto Idle, it's highly fuel-efficient too.

Engine
Maximum Engine Power 173hp (129kW)
Loader Capacity
Maximum Loader Capacity 3.5yd3 (2.7m3)
Operating Weight 40534lb (18386kg)

Komatsu Wheel Loaders WA1200-6
WA1200-6 Wheel Loader

26.2 yd³. 1765 hp. Incredible numbers for Komatsu's largest, most productive wheel loader, the WA1200-6. From the low vibration cab the operator uses his advanced joystick control and modulated clutch drive system to maneuver in tight areas to load trucks up to 320 ton capacity. High stability and breakout force give the operator the confidence he needs to keep up with the production demands of today's mines.

Engine
Model Komatsu SDA16V160E-2
Type Water-cooled, 4-cycle
Aspiration Turbocharged and aftercooled
Number of cylinders 16
Bore x stroke 6.26'' x 7.48'' 159 mm x 190 mm
Piston displacement 3,661 in³ 60 ltr
Governor Electronic fuel control
Flywheel horsepower
SAE J1995 - Gross 1892 HP 1411 kW
ISO 9249/SAE J1349 - Net 1765 HP 1316 kW 1765 hP
Rated rpm 1800 rpm
Fan drive method for radiator cooling Mechanical
Fuel system Modular common rail system direct injection
Lubrication system
Method Screw pump, forced lubrication
Filter Full-flow
Air cleaner Dry-type with double elements and automatic dust evacuation with dust indicator on monitor
Transmission
Torque converter - Type 3-element, single-stage, single-phase
Transmission - Type Full power shift, planetary gear with modulated clutch
Travel Speed (Measured with 60/80 R57 tires):
1st Forward 3.8 mph 6.1 km/h
1st Reverse 3.9 mph 6.3 km/h
2nd Forward 6.9 mph 11.1 km/h
2nd Reverse 7.1 mph 11.4 km/h
3rd Forward 11.6 mph 18.7 km/h
3rd Reverse 12.0 mph 19.3 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, full-floating
Rear Center-pin support, full-floating, 16˚ total oscillation
Reduction gear Spiral bevel gear
Differential gear Straight bevel gear
Final reduction gear Planetary gear, double reduction, oil bath
Brakes
Service brakes Hydraulically actuated, wet, multi-disc brakes actuated on four wheels.
Parking brake Wet, multi-disc, hydraulically-released, spring applied in the transmission.
Secondary brake Parking brake is commonly used
Steering System
Type Articulated, fully-hydraulic power steering
Steering angle 40° each direction
Turning radius outside corner of bucket and teeth 47'0" 14330 mm
Hydraulic System
14330 mm Rated capacity (discharge flow) @1800 engine rpm
Loader pump 269 gal/min 1018 ltr/min
Steering pump 167 gal/min 633 ltr/min
Switch pump 167 gal/min 633 ltr/min
Relief valve setting 4,550 psi 31.4 MPa 320 kg/cm²
Control valves A double spool closed-center hydraulic valve and a steering valve combined with a demand valve to provide optimum flow.
Hydraulic cylinders/Number of cylinders Bore x stroke: Bore x stroke:
Boom/2 14.2''x 72.2'' 360 mm x 1835 mm
Bucket/2 11.8''x 38.8" 300 mm x 985 mm
Steering/2 8.9''x 26.0'' 225 mm x 660 mm
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 14.8 sec
Dump 3.2 sec
Lower (empty) 5.3 sec
OPS FOPS Level 2 Cab
The cab is mounted on viscous damping mounts and is well insulated.
Service Refill Capacities
Cooling system 132 U.S. gal 500 ltr
Fuel tank 1,347 U.S. gal 5100 ltr
Engine 74 U.S. gal 280 ltr
Hydraulic system 343 U.S. gal 1300 ltr
Differential, final drive (each axle) 177 U.S. gal 670 ltr
Torque converter and transmission 92 U.S. gal 350 ltr
Brake oil 20 U.S. gal 75 ltr
Brake cooling 77 U.S. gal 290 ltr
Tires
Select proper tires based on job requirements. 500 ltr
Standard rim size 47.00-57/5.0
Standard tire size 60/80 R57

New Holland Wheeled Excavators WE 210B PRO

Specifications
Engine Power 129 kW/173 hp
Operating weight 20.5/21.6 t

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics