Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Edinburg, North-Dakota

With easy, hassle-free and direct access to local construction industry’s broadest fleet through our network of vendors, you can be assured of the fact that your construction projects would never get delayed for want of the latest and well-maintained machines!

If construction equipment rental (for a variable length of time) is what you are looking for in Edinburg, we can help!

You just have to reach us via our toll free number or contact form (on the right) and we will try our level best to match you against the right vendor.

In terms of performance and age, our vendors’ fleet of heavy construction equipment is among the best in the region. We even ask our customers to inspect the equipment in-person by visiting convenient locations before making a final decision on whether our network’s comprehensive offering is actually useful for them or not.

Equipment Rental Edinburg, Construction equipment rental Edinburg, Construction Edinburg, Heavy Equipment Rental Edinburg.

John Deere Backhoe Loader 310K Interim Tier 4
Shift productivity into a higher gear.

The new 310K Backhoe is all about delivering what you want. The EPA IT4/EU Stage IIIB technology is simple, fuel efficient, fully integrated, and fully supported. Choose from pilot, two-lever, three-lever, four-lever, or SAE excavator-style controls. Smooth response and low effort are yours regardless of which you select. It also boasts enhancements such as a more efficient HVAC system and machine-security system. Redesigned easier-to-clean cooling package. Quarter cab option for easy jobsite communication. Plus, our 310K backhoe Loader comes standard with JDLinkTM and Service ADVISORTM Remote to keep your machines productive.

From the increased hood tilt that allows even easier engine access, to the tilt-out coolers that open up the cores - the 310K Backhoe is loaded with features that make it as easy to maintain as it is to operate. Same-side ground-level service points help daily checks and additions go more quickly. Other commonsense features such as quick-change filters, extended service intervals, simple-to-read sight gauges, and easy-access grease zerks help increase uptime and lower daily operating costs. And because no maintenance beats low maintenance, self-adjusting serpentine belts, park brakes, and wet-disc brakes seldom, if ever, require attention. Altogether, the 310K gives you the machine you asked for.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech E 4045HT073
Net Power, kW (hp) @ Rated rpm 66 (88) @ 2000
Displacement, L (cu in.) 4.5 (275)
electrical
Voltage 12
Alternator amps 90
transmission
Type Powershift
Max. Travel Speed - fwd, kph (mph) 33.1 (20.6)
Max. Travel Speed - rev, kph (mph) 12.9 (8)
Brakes
Type Wet Multi Disc
Actuation Hydraulic w/Power Assist
hydraulic system
Pump Type Gear Type Pump
Pump Flow, L/min (gpm) 106 (28)
System Pressure, kPa (psi) 24993 (3625)
Backhoe, Fixed length dipperstick
Max. Digging Depth, mm (ft in) 5460 (17 ft 11 in)
2ft (0.61m) Flat Bottom, mm (ft in) 4320 (14 ft 2 in)
Reach from Swing Center, mm (ft in) 5440 (17 ft 10 in)
Truck Loading Height, mm (ft in) 3330 (10 ft 11 in)
Digging Force Crowd, kN (lb) 31.2 (7006)
Bucket, Power Dig, kN (lb) 49.4 (11106)
deere lift capacities are according to sae j31
Max. Digging Depth, mm (ft in) 5460 (17 ft 11 in)
2ft (0.61m) Flat Bottom, mm (ft in) 4320 (14 ft 2 in)
Reach from Swing Center, mm (ft in) 5440 (17 ft 10 in)
Truck Loading Height, mm (ft in) 3330 (10 ft 11 in)
Digging Force Crowd, kN (lb) 31.2 (7006)
Bucket, Power Dig, kN (lb) 49.4 (11106)
Deere figures listed are 87% of the max lift force available
Boom Lift Cap. @ Ground Level, kg (lb) 1154 (2545)
Dipperstick Lift Capacity @ 12' Height, kg (lb) 2204 (4859)
backhoe, standard bucket
SAE Heaped Capacity, cu m (cu ft) 0.18 (6.5)
Backhoe Bucket Width, mm (in) 305 (12)
Bucket Rotation, deg 190
Loader
SAE Heaped Capacity, cu m (cu yd) 0.77 (1)
Loader Bucket Width, mm (in) 2184 (7 ft 2 in)
Breakout force, kN (lb) 41.6 (9350)
Lift Capacity to Full Height, kg (lb) 2996 (6600)
Dump Clearance @ 45 deg, mm (ft in) 2690 (8 ft 10 in)
Dump Reach, mm (in) 785 (30.9)
Bucket Hinge Pin Max. Height, mm (ft in) 3380 (11 ft 1 in)
Coupler (Mechanical, Hydraulic) Option
Two wheel drive
Wheelbase, mm (in) 2110 (6 ft 11 in)
Curb Turning Radius w/out Brakes, mm (ft in) 3940 (12 ft 11 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3440 (11 ft 3 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5380 (17 ft 8 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 4945 (16 ft 3 in)
Four WHEEL DRIVE
Wheelbase, mm (in) 2140 (7 ft )
Curb Turning Radius w/out Brakes, mm (ft in) 4080 (13 ft 5 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3580 (11 ft 9 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5525 (18 ft 2 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 5055 (16 ft 7 in)
dimensions
Transport Height, mm (ft in) 3430 (11 ft 3 in)
Transport Length, mm (ft in) 7090 (23 ft 3 in)
Transport Width, mm (ft in) 2180 (7 ft 2 in)
Width Over Tires, mm (in) 2180 (7 ft 2 in)
capacities
Fuel Tank, L (gal) 155.2 (41)
Hydraulic Reservoir, L (gal) 37.1 (9.8)
weight 2wd, rops
SAE Operating Weight, kg (lb) 6195 (13657.6)
Metric Ton Weight, kg (lb) 6.195 (13.658)
WEIGHT 4WD, cab, ext.hoe
SAE Operating Weight, kg (lb) 6563 (14468.9)
Metric Ton Weight, kg (lb) 6.563 (14.469)

Komatsu Trucks HM400-3
HM400-3 Articulated Truck

The 44 ton capacity HM400-3 has a Tier 4 interim Komatsu engine which, combine with other energy saving improvements, can reduce fuel consumption up to 14%. The Komatsu Traction Control System ensures that a loaded HM400-3 will be able to pull through the most severe underfoot conditions. The operator can choose between Economy and Power modes to further tailor his machine performance to the job at hand. Among the cab improvements are a forward facing training seat and separate screen for the rear view camera.

Engine
Model Komatsu SAA6D140E-6*
Type Water-cooled, 4-cycle
Aspiration Komatsu variable geometry, turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.5" 165 mm
Piston displacement 928 in3 15.24 ltr
Horsepower :
SAE J1995 473 HP 353 kW
ISO 9249 / SAE J1349 469 HP 350 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Maximum torque 1669 ft lbs 2263 Nユm
231 kgユm
Fuel system Direct injection
Governor Electronically controlled
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner (cyclonpack type), plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmissions
Torque converter 3-elements, 1-stage, 2-phase
Transmission Full-automatic, counter-shaft type
Speed range 6 speeds forward and 2 reverse
Lockup clutch Wet, single-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive and direct drive in all gear
Shift control Electronic shift control with automatic clutch modulation in all gear
Maximum travel speed 34.7 mph 55.9 km/h
Axles
Full time all wheel drive
Final drive type Planetary gear
Ratios:
Differential 3.727
Planetary 4.941
Suspension System
Front Hydro-pneumatic suspension
Rear Combined hydro-pneumatic and rubber suspension system
Steering System
Type Articulated type, fully hydraulic power steering with two double-acting cylinders
Supplementary steering Automatically actuated, electrically powered
Standard ISO5010, SAE J1511
Minimum turning radius, wall to wall 28' 10" 8.8 m
Articulation angle 45° each direction
Cab
Standard ISO3449 (FOPS)
ISO3471 (ROPS)
Brakes
Service brakes Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
Standard ISO3450
Parking brake Spring applied, caliper disc type
Retarder Front and center axle brakes act as retarder
Main Frame
Type Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
Body
Capacity:
Struck16.9 23.8 yd3 18.2 m3
Heaped (2:1, SAE) 31.4 yd3 24 m3
Payload 44.1 U.S. tons 40 metric tons
Material - high tensile strength steel 184,925 psi 30 kg/mm2
Material thickness:
Bottom 0.55" 14 mm
Front 0.31" 8 mm
Sides 0.47" 12 mm
Target area - (inside length x width) 18' 7" x 10' 6" 5667 mm x 3194 mm
Heating Exhaust heating (optional)
Hydraulic System
Hoist cylinder Twin, telescopic type
Relief pressure 4264 psi 275 kg/cm2 / 27 Mpa
Hoist time 12.0 sec
Weight (approximate)
Empty weight 74,207 lbs 33,660 kg
Gross vehicle weight 162,569 lbs 73,740 kg
Weight distribution:
Empty:
Front axle 56.4%
Center axle 22.5%
Rear axles 21.1%
Loaded:
Front axle 29.4%
Center axle 35.4%
Rear axles 35.2%
Tires
Standard tire 29.5 R25
Service Refill Capacities
Fuel tank 136.8 U.S. gal 518 L
Engine oil 9.3 U.S. gal 35 L
Torque converter, transmission and retarder cooling 33 U.S. gal 125 L
Differentials (total) 28.5 U.S. gal 108 L
Final drives (total) 8.5 U.S. gal 32 L
Hydraulic system 44.1 U.S. gal 167 L
Suspension (total) 5.7 U.S. gal 21.4 L

Komatsu Trucks HD465-7
HD605-7 Off-Highway Truck

The HD605-7 is a 70 ton capacity truck that has proven its worth in mines around the world. The HD605-7 has a top loaded speed of 43.5 mph and great climbing power to get out of the pit quickly, dump and cycle back for high production. The oil-cooled wet multi-disc retarder gives the operator great controllability on downhill slopes. A frame designed like Komatsu's largest mining trucks handles the stress and strains of mining to provide long productive and trouble free life.

Engine
Model Komatsu SAA6D170E-5
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, air-to-air after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1,413 in3 23.15 ltr
Horsepower:
SAE J1995 / Gross 739 HP 551 kW
ISO9249/SAE J1349 / Net 715 HP 533 kW
Rated rpm 2,000 rpm
Fan drive type Mechanical
Maximum torque 2,452 lb. ft 339 kg-m
Fuel system Direct injection
Governor Electronically controlled
Lubrication system :
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and precleaner (cyclonpack type), plus dust indicator
EPA Tier 3 and EU Stage 3A emission certified.
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission: Full-automatic, planetary type
Speed range 7 speeds forward and 1 reverse
Lockup clutch Wet, multiple-disc clutch
Forward Torque converter drive in 1st gear, direct drive in 1st lockup and all higher gears
Reverse Torque converter drive
Shift control Electronic shift control with automatic clutch modulation in all gears
Maximum travel speed 43.5 mph 70.0 km/h
Axles
Final drive type Planetary gear
Rear Axle Full-floating
Ratios:
Differential 3.538
Planetary 4.737
Suspension System
Independent, hydropneumatic suspension cylinder with fixed throttle to dampen vibration
Effective cylinder stroke (front suspension) 11.9" 303 mm
Rear axle oscillation:
Oil stopper 6.8°
Mechanical stopper 7.7°
Steering system
Type Fully hydraulic power steering with two double-acting cylinders
Supplementary steering Manually controlled (meets ISO 5010, SAE J1511 and SAE J53)
Minimum turning radius 27'11" 8.5 m
Maximum steering angle (outside tire) 39°
Cab
Dimensions comply with ISO 3471 and SAE J1040-1988c ROPS (Roll-Over Protective Structure) standards.
Main Frame
Type Box-sectioned structure
Brakes
Brakes meet ISO J3450 and SAE J1473 standards.
Service brakes:
Front Full-hydraulic control, caliper disc type
Rear Full-hydraulic control, oil-cooled multiple-disc type
Parking brake Spring applied, multiple-disc type
Retarder Oil-cooled, multiple-disc rear brakes act as retarder.
Secondary brake Manual pedal operation. When hydraulic pressure drops below the rated level, parking b rake is automatically actuated.
Brake surface:
Front 300 in2 1936 cm2
Rear 9,956 in2 64230 cm2
Body
Capacity:
Struck 37.9 yd³ 29.0 m³
Heaped (2:1 ,SAE) 52.3 yd³ 40.0 m³
Payload 69.4 U.S. tons 63.0 metric tons
Material (high tensile strength steel) 227,500 psi 160 kg/mm²
Structure V-shape body with V-bottom
Material thickness:
Bottom 0.98" 25 mm
Front 0.63" 16 mm
Sides 0.55" 14 mm
Target area: (inside length x width) 21'8" x 12'8" 6600 mm x 3870 mm
Dumping angle 48°
Height at full dump 28'10" 8800 mm
Heating Exhaust heating
HyDRaulic System
Hoist cylinder Twin, 2-stage telescopic type
Relief pressure 2,990 psi 210 kg/cm2
20.6 MPa
Hoist time 11.5 sec
Weight (approximate)
Empty weight (quarry body) 95,020 lb 46200 kg
Max. gross vehicle weight:
Standard tire 242,900 lb 110180 kg
Not to exceed max. gross vehicle weight, including options, fuel
Weight distribution:
Empty:
Front axle 47%
Rear axle 53%
Loaded:
Front axle 32%
Rear axles 68%
tires
Standard Tires 24.00 R35
Service Refill Capacities
Fuel tank 206.1 U.S. Gal 780 ltr.
Engine oil 21.1 U.S. Gal 80 ltr.
Torque converter, transmission and retarder cooling 56.8 U.S. Gal 215 ltr.
Differentials 25.1 U.S. Gal 95 ltr.
Final drives (total) 11.1 U.S. Gal 42 ltr.
Hydraulic system 32.2 U.S. Gal 122 ltr.
Suspension (total) 14.7 U.S. Gal 55.6 ltr.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics