Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Atwater, Ohio

Do you need the latest, clean and well-maintained heavy construction equipment delivered to the jobsite in Atwater?

With us, you can gain instant access to a wide selection of construction tools and machineries. Yes, since we have onboard a network of reliable vendors having a large ready-to-rent inventory of equipment, you will never to look anywhere else for heavy construction equipment rentals in Atwater.

Each time you need some extra machinery, accessories or tools, our vendors will have them delivered right to your jobsite, and on time. You may be in need of such machines and tools for just one day, a week or any length of time. Our vendors do not impose unrealistic or inflexible rental agreements on you.

Dial our toll free number today or submit the short contact form on the right to get started. Our vendors will start contacting you to learn about your exact requirements in no time.

Equipment Rental Atwater, Construction equipment rental Atwater, Construction Atwater, Heavy Equipment Rental Atwater .

Komatsu Excavators PC35MR-3
PC35MR-3 Hydraulic Excavator

What weighs 7,909 lbs., a swinging boom to dig right next to buildings and a blade to backfill after itself? The Komatsu PC35MR-3 of course. Built with the durability of bigger Komatsu excavators, the PC35MR-3 is a powerhouse in a compact package.

Engine
Model Komatsu 3D88E-6
Type Direct injection
Piston displacement 100 in³ 1.64 ltr
Horsepower @ 2600 rpm:
Net (ISO 9249/SAE J1349) 29 HP 21.4 kW
Electric System
Operation voltage 12 V
Battery 58 Ah
Alternator 40 A
Starter 2.3 kW
Hydraulic System
Type HydrauMind
Main pump:
Type Variable displacement x 2Gear x 1
Maximum flow 9.5 x 2 + 5.2 gal/min 36.1 x 2 + 19.8 ltr/min
Hydraulic motors:
Travel Variable displacement x 2
Swing Fixed displacement x 1
Maximum pressure setting 3,770 psi 265 kg/cm²
Auxiliary flow 18.5 gal/min 70 ltr/min
Performance
Travel speed:
High 3.0 mph 4.8 km/hr
Low 1.7 mph 2.8 km/hr
Swing speed 9.0 rpm
Ground pressure 5.1 psi 0.36 kg/cm²
Max. drawbar pull 7,500 lb 3400 kg
Gradeability 30°
Bucket digging force (ISO) 6,725 lb 3050 kg
Arm crowd force (ISO) 3,682 lb 1670 kg
Drives and Brakes
Drive method Hydrostatic
Type of travel brake Hydraulic lock
Type of travel shoe Rubber
Undercarriage
Adjustment of the track tension Grease gun
Number of carrier rollers (each side) 1
Number of track rollers (each side) 4
Refill Capacities
Fuel tank 11.6 U.S. gal 44 ltr
Hydraulic tank 3.7 U.S. gal 14 ltr
Engine 1.8 U.S. gal 6.7 ltr
Coolant 0.9 U.S. gal 3.3 ltr
Operating Weight (approximate)
Operating weight(with ROPS canopy and rubber shoe) 7,909 lb 3595 kg
Blade
Width x height 5'9" x 1'2" 1740 x 355 mm

Komatsu Excavators PC88MR-10
PC88MR-10 Hydraulic Excavator

The PC88MR-10 is a link between minis and mid-size excavators. The PC88MR-10 has a swing boom, tight tail swing, three track options and backfill blade like a mini but is built to have the reliability and durability of larger excavators.

Engine
Model Komatsu SAA4D95LE-5
Type Water cooled, 4-cycle, direct injection
Aspiration Turbocharged, and air-to-air aftercooled
Number of cylinders 4
Piston displacement 199 in³ 3.26 ltr
Horsepower @ 1950 rpm:
Net (ISO 9249/SAE J1349) 65.5 HP 48.8 kW
Electric System
Operation voltage 24 V
Battery 55 Ah / 2x12 V
Alternator 35 A / 24 V
Starter 4.5 kW / 24 V
Hydraulic System
Type - HydrauMind (Hydraulic Mechanical Intelligence New Design) system, Closed-center system with load-sensing valves and pressure-compensated valves
Main pumps:
Type Variable displacement, axial piston
Maximum flow 42.3 U.S gal/min 160 ltr/min
Hydraulic motors:
Travel 2 x piston motor with parking brake
Swing 1 x piston motor with swing holding brake
Relief valve setting:
Implement, travel circuit 3,840 psi 26.5 MPa 270 kgf/cm²
Swing and blade circuit 3,060 psi 21.1 MPa 215 kgf/cm²
Performance
Travel speed:
High 3.2 mph 5.1 km/hr
Low 1.8 mph 2.9 km/hr
Swing speed 10.0 rpm
Ground pressure 5.4 psi 0.38 kg/cm²
Max. drawbar pull 15,050 lbf 66.9 kN / 6820 kgf
Gradeability 35°
Bucket digging force (ISO) 13,780 lb 6250 kg
Arm crowd force (ISO) 8,160 lb 3700 kg
Swing System
Driven by Hydraulic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Swing lock Automatic, with oil immersed discs
Drives & Brakes
Steering control Two levers with pedalsr
Drive method Fully hydrostatic
Service brake Hydraulic lock
Parking brake Mechanical disc
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed track
Track adjuster Hydraulic
Number of carrier rollers 1 each side
Number of track rollers 5 each side
Refill Capacities
Fuel tank 33.0 u.s. gal 125 ltr
Radiator 2.6 u.s. gal 10 ltr
Engine 2.9 u.s. gal 11 ltr
Final drive, each side 0.3 u.s. gal 1.1 ltr
Swing drive 0.7 U.S. gal 2.85 ltr
Hydraulic tank 14.8 u.s. gal 56 ltr
Operating Weight (approximate)
Operating weight including 3405 mm / 11'2" one-piece boom, 2100 mm / 6'11" arm, SAE heaped 0.28 m³ / 0.37 yd³ backhoe bucket, blade, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Operating weight 18,558 lb 8420 kg

Komatsu Excavators PC290LC-10

PC290LC-10 Hydraulic Excavator

Precision, power, stability, you get it all in the Komatsu Excavators PC290LC-10. With six working modes, Power Max, Tier 4 interim engine technology can save up to 10% on your fuel bill compared to the previous model and you have an excavator that will tackle any job you can throw at it.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 4.21" 107 mm
Stroke 4.88" 124 mm
Piston displacement 408 in³ 6.69 ltr
Horsepower:
SAE J1995 : Gross 213 HP 159 kW
ISO 9249/SAE J1349 : Net 196 HP 147 kW
Rated rpm 2050 rpm
Fan drive type Mechanical
Governor All-speed control, electronic.
*EPA Tier 4 Interim and EU Stage 3B emissions certified.
Hydraulics
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 126.5 U.S. gal/min 479 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 5,400 psi 380 kgf/cm² / 37.3 MPa
Swing circuit 4,190 psi 295 kgf/cm²/ 28.9 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 5.5" x 51.2" x 3.9" 140 mm x 1300 mm x 100 mm
Arm / 1 5.9" x 64.3" x 4.3" 150 mm x 1635 mm x 110 mm
Bucket / 1 5.5" x 39.7" x 3.9" 140 mm x 1009 mm x 100 mm
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 56,000 lb 249 kN / 25400 kg
Maximum travel speed: (Auto-Shift)
High 3.4 mph 5.5 km/h
Mid 2.5 mph 4.1 km/h
Low 1.9 mph 3.0 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 10.5 rpm
Swing torque 64,292 ft lbs 8889 kg•m
Undercarriage
Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (Refilling)
Fuel tank 105.7 U.S. gal 400 ltr
Coolant 9.5 U.S. ga 36 ltr
Engine 6.1 U.S. gal 23.1 ltr
Final drive, each side 2.2 U.S. gal 8.5 ltr
Swing drive 1.9 U.S. gal 7.2 ltr
Hydraulic tank 34.9 U.S. gal 132 ltr
Hydraulic system 66.0 U.S. gal 250 ltr
Operating Weight (APROXIMATE)
Operating weight, including 6150 mm / 20'2" one-piece boom, 3200 mm / 10'6" arm, SAE heaped 1.41 m³ / 1.85 yd³ backhoe bucket*, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Shoes 28" 700 mm
Operating Weight 67,396 lb 30570 kg
Ground Pressure 7.17 psi 0.50 kg/cm²
Shoes 31.5'' 800 mm
Operating Weight 68,234 lb 30950 kg
Ground Pressure 6.36 psi 0.45 kg/cm²
Shoes 33.5" 850 mm
Operating Weight 68,654 lb 31141 kg
Ground Pressure 6.01 psi 0.42 kg/cm²
Component Weights
Arm including bucket cylinder and linkage
3200 mm / 10'6" arm assembly 3,157 lb 1432 kg
3500 mm / 11'6" arm assembly 3,316 lb 1504 kg
One piece boom including arm cylinder:
6150 mm / 20'2" boom asssembly 5,397 lb 2448 kg
Boom cylinders x 2 509 lb 231 kg
Counterweight 12,148 lb 5510 kg
1.41 m³ / 1.85 yd³ bucket - 48" width 2,399 lb 1088 kg

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics