Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Brookville, Ohio

Do you need the latest, clean and well-maintained heavy construction equipment delivered to the jobsite in Brookville?

With us, you can gain instant access to a wide selection of construction tools and machineries. Yes, since we have onboard a network of reliable vendors having a large ready-to-rent inventory of equipment, you will never to look anywhere else for heavy construction equipment rentals in Brookville.

Each time you need some extra machinery, accessories or tools, our vendors will have them delivered right to your jobsite, and on time. You may be in need of such machines and tools for just one day, a week or any length of time. Our vendors do not impose unrealistic or inflexible rental agreements on you.

Dial our toll free number today or submit the short contact form on the right to get started. Our vendors will start contacting you to learn about your exact requirements in no time.

Equipment Rental Brookville, Construction equipment rental Brookville, Construction Brookville, Heavy Equipment Rental Brookville .

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Excavators PC35MR-3
PC35MR-3 Hydraulic Excavator

What weighs 7,909 lbs., a swinging boom to dig right next to buildings and a blade to backfill after itself? The Komatsu PC35MR-3 of course. Built with the durability of bigger Komatsu excavators, the PC35MR-3 is a powerhouse in a compact package.

Engine
Model Komatsu 3D88E-6
Type Direct injection
Piston displacement 100 in³ 1.64 ltr
Horsepower @ 2600 rpm:
Net (ISO 9249/SAE J1349) 29 HP 21.4 kW
Electric System
Operation voltage 12 V
Battery 58 Ah
Alternator 40 A
Starter 2.3 kW
Hydraulic System
Type HydrauMind
Main pump:
Type Variable displacement x 2Gear x 1
Maximum flow 9.5 x 2 + 5.2 gal/min 36.1 x 2 + 19.8 ltr/min
Hydraulic motors:
Travel Variable displacement x 2
Swing Fixed displacement x 1
Maximum pressure setting 3,770 psi 265 kg/cm²
Auxiliary flow 18.5 gal/min 70 ltr/min
Performance
Travel speed:
High 3.0 mph 4.8 km/hr
Low 1.7 mph 2.8 km/hr
Swing speed 9.0 rpm
Ground pressure 5.1 psi 0.36 kg/cm²
Max. drawbar pull 7,500 lb 3400 kg
Gradeability 30°
Bucket digging force (ISO) 6,725 lb 3050 kg
Arm crowd force (ISO) 3,682 lb 1670 kg
Drives and Brakes
Drive method Hydrostatic
Type of travel brake Hydraulic lock
Type of travel shoe Rubber
Undercarriage
Adjustment of the track tension Grease gun
Number of carrier rollers (each side) 1
Number of track rollers (each side) 4
Refill Capacities
Fuel tank 11.6 U.S. gal 44 ltr
Hydraulic tank 3.7 U.S. gal 14 ltr
Engine 1.8 U.S. gal 6.7 ltr
Coolant 0.9 U.S. gal 3.3 ltr
Operating Weight (approximate)
Operating weight(with ROPS canopy and rubber shoe) 7,909 lb 3595 kg
Blade
Width x height 5'9" x 1'2" 1740 x 355 mm

Komatsu Excavators PC360LC-10

PC360LC-10 Hydraulic Excavator

The PC360LC-10 Hydraulic Excavator with Komatsu's Tier 4 interim engine technology can save up to 10% on your fuel bill compared to the previous model and, more importantly, you won't need to stop the machine to do normal regeneration. Couple that with six working modes, Power Max, more powerful lift mode and you have an excavator that will meet any challenge you can through at it.

Engine
Model Komatsu SAA6D114E-5*
Type Water-cooled, 4-cycle, direct injection
Aspiration Turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 4.49" 114 mm
Stroke 5.69" 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Horsepower
SAE J1995 : Gross 271 HP 202 kW
ISO 9249/SAE J1349 : Net 257 HP 192 kW
Rated rpm 1950 rpm
Fan drive type Mechanical
Governor All-speed control, electronic.
*EPA Tier 4 Interim and EU Stage 3B emissions certified.
Hydraulics
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 141 U.S. gal/min 535 ltr/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 5,400 psi 380 kgf/cm² / 37.3 MPa
Swing circuit 4,050 psi 285 kgf/cm²/ 27.9 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 5.5" x 58.3" x 3.9" 140 mm x 1480 mm x 100 mm
Arm / 1 6.3" x 71.9" x 4.3" 160 mm x 1825 mm x 110 mm
Bucket / 1 - for 3.2 m 10'5" and 4.0 m 13'2" Arms 5.5" x 50.6" x 3.9" 140 mm x 1285 mm x 100 mm
Bucket / 1 - for 2.54 m 8'4" Arm 5.9" x 50.6" x 4.3" 150 mm x 1285 mm x 110 mm
Drives & Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 66,191 lb 290 kN / 29570 kgf
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift)
High 3.4 mph 5.5 km/h
Mid 2.8 mph 4.5 km/h
Low 2.0 mph 3.2 km/h
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method: Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.5 rpm
Swing torque 82,313 ft. lbs. 11386 kg•m
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant and Lubricant Capacity (refilling)
Fuel tank 159.8 U.S. gal 605 ltr
Coolant 9.7 U.S. gal 37 ltr
Engine 9.2 U.S. gal 35.0 ltr
Final drive, each side 2.4 U.S. gal 9.0 ltr
Swing drive 3.6 U.S. gal 13.7 ltr
Hydraulic tank 49.7 U.S. gal 188 ltr
Hydraulic system 96.4 U.S. gal 365 ltr
Operating Weight (approximate)
Operating weight includes 6500 mm / 21'3" one-piece HD boom, 3185 mm / 10'5" arm, SAE heaped 1.96 m³ / 2.56 yd³ bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
Shoes 28" 700 mm
Operating Weight 78,255 lb 35496 kg
Ground Pressure 8.31 psi 0.59 kg/cm²
Shoes 31.5'' 800 mm
Operating Weight: 79,093 lb 35876 kg
Ground Pressure 7.40 psi 0.52 kg/cm²
Shoes 33.5" 850 mm
Operating Weight: 79,930 lb 36255 kg
Ground Pressure 7.00 psi 0.50 kg/cm²
Component Weights
Arm including bucket cylinder and linkage:
3185 mm / 10'5" arm assembly 3,882 lb 1761 kg
4020 mm / 13'2" arm assembly 4,383 lb 1988 kg
One piece HD boom including arm cylinder:
6500 mm / 21'3" boom assembly 6,912 lb 3135 kg
Boom cylinders x 2 571 lb 259 kg
Counterweight 15,631 lb 7090 kg
1.96 m³ / 2.56 yd³ bucket - 54" width 3,425 lb 1554 kg

Komatsu Excavators PC360LC-10 SLF
PC360LC-10 Super Long Front Hydraulic Excavator

Match the highly productive PC360LC-10 to a super long front and you have a powerful, versatile machine with a huge operating envelope. The functions and operations are that of the standard excavator but with a wide variety of ditch cleaning and general purpose buckets for dredging, cleaning and sloping applications.

Notes:

  • The details in this specification brochure are based on Dash 8 and Dash 10 models as indicated. Some attachments may be installed on prior models but specifications may vary. Contact Young Corporation for details.
  • Variations to the specifications in this brochure can be designed and produced in accordance with customer requirements by contacting Young Corporation with details.
  • SUPER LONG FRONT ATTACHMENTS are designed for “LIGHT DUTY" work only. Excavating work or heavy hoisting may result in side loads and other activities that will damage the machine.
  • Disassembly may be required due to transport restrictions.
  • Illustrations may include optional equipment.
  • Operating weights include additional counterweight when required.

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics