Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Chesapeake, Ohio

Do you need the latest, clean and well-maintained heavy construction equipment delivered to the jobsite in Chesapeake?

With us, you can gain instant access to a wide selection of construction tools and machineries. Yes, since we have onboard a network of reliable vendors having a large ready-to-rent inventory of equipment, you will never to look anywhere else for heavy construction equipment rentals in Chesapeake.

Each time you need some extra machinery, accessories or tools, our vendors will have them delivered right to your jobsite, and on time. You may be in need of such machines and tools for just one day, a week or any length of time. Our vendors do not impose unrealistic or inflexible rental agreements on you.

Dial our toll free number today or submit the short contact form on the right to get started. Our vendors will start contacting you to learn about your exact requirements in no time.

Equipment Rental Chesapeake, Construction equipment rental Chesapeake, Construction Chesapeake, Heavy Equipment Rental Chesapeake .

Komatsu Dozer D275AX-5WH
D275AX-5WH
The D275AX-5WH is a dozer specially equipped to fill the requirements of the sanitary landfill market. Guarding like fore and aft striker bars, belly pan with electric winch, chassis seal package and seal guards on the final drives, pivot shafts and idlers provide the protection needed in the severe landfill environment. Hydrostatic steering gives the D275AX-5SL the maneuverability required on a landfill and the lock-up torque converter provides the pushing power needed while still saving fuel.

Specification
Net Horsepower 410 HP 306 kw
Operating weight (Approx.) 116,528 lb** 52856 kg**
Engine Model Komatsu SAA6D140E-5
Rated Engine RPM 2000
Number of cylinders 6
Bore 5.51" 140 mm
Stroke 6.50" 165 mm
Piston displacement 930 in³ 15.24 ltr
Track rollers (each side) 7
Carrier rollers (each side) 2
Width of standard track shoe 24" 610 mm
Length of track on ground 2000 rpm
Fan drive type 11'5" 3480 mm
Ground contact area (with standard shoe) 6,580 in² 42456 cm²
Track gauge 7'5" 2260 mm
** with Full-U Blade
Note: Operating weight includes blade indicated, landfill counterweight, steel cab, ROPS, operator, standard equipment, landfill package, rated capacity of lubricant, coolant, and full fuel tank.

Komatsu Dozers D37PXi-23
D37PXi-23 Crawler Dozer
iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA4D95LE-6*
Type 4-cycle, water-cooled, direct injection
Aspiration Variable flow, turbocharged, air-to-air aftercooled
Number of cylinders 4
Bore x stroke 3.75" x 4.52" 95 mm x 115 mm
Piston displacement 199 i³ 3.26 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 91 HP 68 kW
ISO 9249 / SAE J1349 - Net 89 HP 66 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 5.3 km/h / 8.5 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed (quick shift mode)* Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed (variable mode) Forward Reverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
FINAL DRIVE
In-shoe mounted axial piston type travel motors with integrated twostage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed

Minimum turning radius* 91" 2.3 m
*As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Rigid track frame
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Sealed and lubricated track Track tension is easily adjusted with grease gun.
Tractor for inside mounted blade (PAT)
Number of track rollers (each side) 6
Number of carrier rollers (each side) 1
Type of shoes (standard) Single grouser
Number of shoes (each side) 41
Grouser height 1.9" 47 mm
Shoe width (standard) 24" 600 mm
Ground contact area 4,148 in² 26760 cm²
Ground pressure
(with standard shoe)
4.67 psi 0.33 kgf/cm² / 32.2 kPa
Track gauge 5'7" 1710 mm
Length of track on ground 7'4" 2230 mm
Link pitch 6.1" 154 mm
SERVICE REFILL CAPACITIES
Coolant 9.0 U.S. gal 34 ltr
Fuel tank 50.2 U.S. gal 190 ltr
Engine oil 2.9 U.S. gal 11 ltr
Hydraulic tank 16.9 U.S. gal 64 ltr
Final drive (each side) 0.9 U.S. gal 3.5 ltr
Operating Weight (approximate)
Tractor weight: Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 17,064 lb 7740 kg
Operating weight: Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 19,533 lb 8860 kg
HYDRALIC SYSTEM
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min / 26 U.S. gal/min at rated engine rpm.
Relief valve setting 3,974 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.0" 75 mm
Blade tilt / 1 3.5" 90 mm
Blade angle / 2 3.1" 80 mm
Blade pitch 1 adjustable linkage
Hydraulic oil capacity (refilling):
Power angle tilt dozer 15.9 U.S. gal 60 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift Raise, hold, and lower


John Deere Motor Graders 872G/GP
So many options, one obvious choice.

Offering one-of-a-kind advantages and unequalled options, our 872G Motor Grader lets you decide how the work gets done. Choose a full-featured Grade Pro (GP) model with state-of-the-art fingertip armrest controls. Or opt for conventional lever-operated machines. In a six-wheel-drive configuration.

Loaded for bear, or barely loaded, this brawny blade comes standard-equipped with heavy-duty durability and uptime-boosting features including a fuel-efficient nine-liter PowerTechâ„¢ diesel, easy-access filter bank, and simple-to-clean pivoting coolers. That's only the beginning. To learn more about the value-added advantages that separate the 872G/GP from the rest of the pack, contact your John Deere dealer for a demo.

ENGINE
Emission Rating Final Tier 4
Engine Make / Engine Model John Deere / PowerTech PSS 9.0L
Net Peak Power, kW (hp) 213 (285)
Gross Power, kW (hp) not published
Displacement, L (cu in.) 9 (548)
Calculated % Torque rise 50
ELECTRICAL
Volts 24
Alternator amps 100
TRANSMISSION ---
Type ---
Speed Range - Forward 8
Speed Range - Reverse 8
Max. Travel Speed - fwd, kph (mph) 45.5 (28.3)
Max. Travel Speed - rev, kph (mph) ---
FINAL DRIVE
Type Powershift
DIFFERENTIAL LOCK 
Type Tandem
BRAKES
Type ---
System Pressure, kPa (psi) Hydraulic
FRONT WHEEL DRIVE
Type Disc
HYDRAULIC SYSTEM
Pump Type Variable axial piston
Pump Flow, L/min (gpm) 218 (57.5)
System Pressure, kPa (psi) 18961 (2750)
STEERING & ARTICULATION
Frame Type Articulated
Articulation, deg 22
Turn Radius, m (ft in) 7.21 (23 ft 8 in)
Front Wheel Lean, deg ---
BLADE RANGE
Bank Cut Angle, deg 90
Shoulder Reach Outside Wheels, Right, mm (ft in) 2329 (7 ft 8 in)
Shoulder Reach Outside Wheels, Left, mm (ft in) 2329 (7 ft 8 in)
Blade Lift Above Ground, mm (in) 452 (17.8)
Blade Pitch Operation, Adjustment Fwd, deg 42
Blade Pitch Operation, Adjustment Rear, deg 5
Blade Side Shift, Right, mm (in) 683 (26.9)
Blade Side Shift, Left, mm (in) 683 (26.9)
Circle Rotation, deg 360
Circle Diameter, mm (in) 1524 (60)
TIRES
Standard 14.00 - 24
DIMENSIONS
Wheelbase, mm (ft in) 6160 (20 ft 3 in)
Blade Base, mm (ft in) 2530 (8 ft 4 in)
Overall Length, mm (ft in) 8890 (29 ft 2 in)
Height w/ROPS, mm (ft in) 3180 (10 ft 5 in)
Clearance Under Front Axle, mm (in) not published
MOLDBOARD
Length, mm (ft in) 4270 (14 ft )
Thickness, mm (in) 25 (1)
Height, mm (ft) 686 (27)
Optional Moldboard Lengths, mm (ft in) not published
CAPACITIES
Fuel Tank, L (gal) 416.5 (110)
Hydraulic Reservoir, L (gal) 60.5 (16)
weight
SAE Operating Weight, kg (lb) 17985 (39650)
Weight on Front Wheels, kg (lb) 5094 (11230)
Weight on Tandem Wheels, kg (lb) 12891 (28420)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics