Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Colerain, Ohio

Do you need the latest, clean and well-maintained heavy construction equipment delivered to the jobsite in Colerain?

With us, you can gain instant access to a wide selection of construction tools and machineries. Yes, since we have onboard a network of reliable vendors having a large ready-to-rent inventory of equipment, you will never to look anywhere else for heavy construction equipment rentals in Colerain.

Each time you need some extra machinery, accessories or tools, our vendors will have them delivered right to your jobsite, and on time. You may be in need of such machines and tools for just one day, a week or any length of time. Our vendors do not impose unrealistic or inflexible rental agreements on you.

Dial our toll free number today or submit the short contact form on the right to get started. Our vendors will start contacting you to learn about your exact requirements in no time.

Equipment Rental Colerain, Construction equipment rental Colerain, Construction Colerain, Heavy Equipment Rental Colerain .

Komatsu Dozers D51EXi-22
D51EXi-22 Crawler Dozer

iMC (intelligent machine control) machines have the following advantages over dozers with external grade control systems.

Innovative
Automated operation from rough dozing to finish grade.

Intelligent
New dozing mode, load control performance features.

Integrated
Standard factory installed integrated system.

No Cables
No coiled cables between machine and blade.

No Climbing
GNSS antenna and mast removed from blade.

No Connections
No daily connections required between machine and blade.

Engine
Model Komatsu SAA6D107E-1*
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in³ 6.69 ltr
Governor All-speed, electronic
Horsepower
SAE J1995 - Gross 133 HP 99 kW
ISO 9249 / SAE J1349 - Net 130 HP 97 kW
Rated rpm 2200 rpm
Fan drive type Hydraulic(reversible)
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
*EPA Tier 3 emissions certified
Hydrostatic transmission
Dual-path, hydrostatic transmission provides infinite speed changes up to 9.0 km/h 5.6 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch.
Travel speed
(quick shift mode)
Forward Reverse
1st 0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd 0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd 0–5.6 mph
0–9.0 km/h
0–5.6 mph
0–9.0 km/h
Travel speed (variable mode) Forward Reverse
0–5.6 mph
0–9.0 km/h
0–5.6 mph
0–9.0 km/h
FINAL DRIVE
Two-stage planetary gear integrated into axial piston travel motors. Compact in-shoe mount reduces risk of damage by debris. Bolt-on sprocket segments for easy replacement.
STEERING SYSTEM
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation. Hydrostatic Transmission (HST) eliminates steering clutches and brakes, providing smooth powerful turns. Fully electronic control enables smooth control. The PCCS utilizes shift buttons to increase and decrease speed.

 

Minimum turning radius* 7'10" 2.39 m
As measured by track marks on the ground at pivot turn.

 

Undercarriage
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated track rollers
Lubricated tracks: Unique seals help prevent entry of foreign abrasive material into pin to bushing clearances for long service life.
Parallel Link Undercarriage System (PLUS) Increased component size and strength, and rotating bushing design provide extended wear life and lower maintenance.
Number of track rollers (each side) 7
Type of shoes (standard) Single grouser PLUS
Number of shoes (each side) 44
Grouser height 2.2" 56 mm
Shoe width (standard) 22" 560 mm
Ground contact area 4,752 in² 30643 cm²
Ground pressure
(with dozer, ROPS cab)
5.76 psi 0.41 kgf/cm² / 39.7 kPa
Track gauge 5'10" 1790 mm
Length of track on ground 9'0" 2736 mm
SERVICE REFILL CAPACITIES
Coolant 9.3 U.S. gal 35 ltr
Fuel tank 71.3 U.S. gal 270 ltr
Engine oil 5.3 U.S. gal 20 ltr
Hydraulic tank 16.6 U.S. gal 63 ltr
Final drive (each side) 1.1 U.S. ga 4.0 ltr
Operating Weight
Tractor weight: Including ROPS cab, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
D51EX-22 24,074 lb 10920 kg
Operating weight: Including power angle tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank.
D51EX-22 27,381 lb 12420 kg
hydraulic system
Closed-center Load Sensing System (CLSS) designed for precise and responsive control and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26.2 U.S. gal/min at rated engine rpm.
Relief valve setting 3,983 psi 27.4 MPa / 280 kg/cm²
Hydraulic cylinders   Double-acting, piston type
Number of cylinders: Bore Bore
Blade lift / 2 3.54" 90 mm
Blade tilt / 1 3.94" 100 mm
Blade angle / 2 3.54" 90 mm
Hydraulic oil capacity (refilling):  
Power angle tilt dozer 16.6 U.S. gal l 63 ltr
Control valves:
3-spool control valve for power angle tilt dozer.
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt   Right, hold, and left
Blade angle   Right, hold, and left
Additional control valve required for ripper
Positions:
Ripper lift  Raise, hold, and lower

John Deere Backhoe Loader 410K Interim Tier 4
Get maximum versatility, end to end.

Want to get the most from your backhoe? Choose a 410K Tool Carrier (TC). Your operators will enjoy responsive near-effortless backhoe control and parallel lift that's simply unparalleled. One-of-a-kind electrohydraulic (EH) design delivers unsurpassed capability. The EH joysticks mounted in the armrests make it easy to move from loader to back hoe and back again. They also provide smooth, single-lever control of auxiliary loader attachments, extendable dipperstick, backhoe auxiliary attachments, hammer, mechanical-front-wheel drive and horn - all operating with the seat turned 90 degrees. With true parallel-lift throughout the lift arc, it gives you the finesse to handle everything from pipe to pallets. And unlike mechanical loader linkages, our exclusive EH-controlled loader employs fewer parts, so you'll spend less time on maintenance.

You won't have to worry about replacing current attachments, either. The standard quick-coupler lets you hook up to a variety of older John Deere and other brands of loader attachments. And to make sure you stay up and running, the 410K TC comes standard with JDLinkTM and Service ADVISORTM Remote.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech E 4045HT063
Net Power, kW (hp) @ Rated rpm 80 (107) @ 2000
Displacement, L (cu in.) 4.5 (276)
electrical
Voltage 12
Alternator amps 90
transmission
Type Powershift
Max. Travel Speed - fwd, kph (mph) 40 (25)
Max. Travel Speed - rev, kph (mph) 21.2 (13.2)
Brakes
Type Wet Multi Disc
Actuation Hydraulic w/Power Assist
hydraulic system
Pump Type Axial Piston Pump
Pump Flow, L/min (gpm) 159 (42)
System Pressure, kPa (psi) 24993 (3625)
Backhoe, Fixed length dipperstick
Max. Digging Depth, mm (ft in) 6100 (20 ft )
2ft (0.61m) Flat Bottom, mm (ft in) 4780 (15 ft 8 in)
Reach from Swing Center, mm (ft in) 5990 (19 ft 8 in)
Truck Loading Height, mm (ft in) 3810 (12 ft 6 in)
Digging Force Crowd, kN (lb) 38.9 (8741)
Bucket, Power Dig, kN (lb) 65.8 (14801)
deere lift capacities are according to sae j31
Max. Digging Depth, mm (ft in) 6100 (20 ft )
2ft (0.61m) Flat Bottom, mm (ft in) 4780 (15 ft 8 in)
Reach from Swing Center, mm (ft in) 5990 (19 ft 8 in)
Truck Loading Height, mm (ft in) 3810 (12 ft 6 in)
Digging Force Crowd, kN (lb) 38.9 (8741)
Bucket, Power Dig, kN (lb) 65.8 (14801)
Deere figures listed are 87% of the max lift force available
Boom Lift Cap. @ Ground Level, kg (lb) 1422 (3136)
Dipperstick Lift Capacity @ 12' Height, kg (lb) 2565 (5655)
backhoe, standard bucket
SAE Heaped Capacity, cu m (cu ft) 0.21 (7.5)
Backhoe Bucket Width, mm (in) 305 (12)
Bucket Rotation, deg 190
Loader
SAE Heaped Capacity, cu m (cu yd) 1 (1.308)
Loader Bucket Width, mm (in) 2337 (7 ft 8 in)
Breakout force, kN (lb) 45.8 (10300)
Lift Capacity to Full Height, kg (lb) 3269 (7200)
Dump Clearance @ 45 deg, mm (ft in) 2690 (8 ft 10 in)
Dump Reach, mm (in) 762 (30)
Bucket Hinge Pin Max. Height, mm (ft in) 3350 (11 ft )
Coupler (Mechanical, Hydraulic) Option
Two wheel drive
Wheelbase, mm (in) 2110 (6 ft 11 in)
Curb Turning Radius w/out Brakes, mm (ft in) 3940 (12 ft 11 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3440 (11 ft 3 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5380 (17 ft 8 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 4945 (16 ft 3 in)
Four WHEEL DRIVE
Wheelbase, mm (in) 2140 (7 ft )
Curb Turning Radius w/out Brakes, mm (ft in) 4080 (13 ft 5 in)
Curb Turning Radius w/ Brakes, mm (ft in) 3580 (11 ft 9 in)
Bucket Clearance Circle, dia. w/ out Brakes, mm (ft in) 5525 (18 ft 2 in)
Bucket Clearance Circle, dia. w/ Brakes, mm (ft in) 5055 (16 ft 7 in)
dimensions
Transport Height, mm (ft in) 3940 (12 ft 11 in)
Transport Length, mm (ft in) 7290 (23 ft 11 in)
Transport Width, mm (ft in) 2180 (7 ft 2 in)
Width Over Tires, mm (in) 2180 (7 ft 2 in)
capacities
Fuel Tank, L (gal) 155.2 (41)
Hydraulic Reservoir, L (gal) 37.1 (9.8)
weight 2wd, rops
SAE Operating Weight, kg (lb) 7213 (15901.9)
Metric Ton Weight, kg (lb) 7.213 (15.902)
WEIGHT 4WD, cab, ext.hoe
SAE Operating Weight, kg (lb) 7722 (17024)
Metric Ton Weight, kg (lb) 7.722 (17.024)

John Deere Crawler Dozers 450J LT
Push productivity to the next level.

Often imitated but never duplicated, the John Deere 450J Dozer continues to set the standard for operator control and productivity. Backed by 30-plus years of hydrostatic experience, its unique state-of-the-art Total Machine Control (TMC) enables an operator to customize machine operation and response to personal preferences. Coupled with an uncommonly smooth full-feature hydrostatic transmission, the John Deere Crawler 450J delivers unsurpassed productivity, uptime, and daily operating costs. That's for starters.

Engine
Emission Rating Interim Tier 4
Engine Make / Engine Model John Deere / PowerTech M 4045
Net Power, kW (hp) @ Rated rpm 52 (70) @ 2200
Displacement, L (cu in) 4.5 (276)
Transmission
Transmission Manufacturer Hydrostatic
Speed Range - forward 1
Speed Range - reverse 1
Maximum Speeds Forward, kph (mph) 8 (5)
Maximum Speeds Reverse, kph (mph) 8 (5)
Final Drives
Type Triple Reduction
Steering
Type Hydrostatic
Hydraulic System
Pump Type Gear Type Pump
Pump Flow, L/min (gpm) 57 (15)
System pressure, kPa (psi) 20680 (3000)
Undercarriage
Track Gauge, mm (ft in) 1392 (4 ft 7 in)
Length of Track on Ground, mm (ft in) 2184 (7 ft 2 in)
Standard shoe type Single Grouser
Ground Contact Area, cm sq (sq in) 17755 (2752)
Ground Pressure, kPa (psi) 40.7 (5.9)
No. of Track Rollers 6
Track Pitch, mm (in) 160 (6.29)
Track Shoes, each side 40
Track Oscillation --
Dozer
Blade Width, mm (ft in) 2464 (8 ft 1 in)
Blade Height, mm (ft in) 955 (3 ft 2 in)
SAE Blade Capacity, cu m (cu yd) 1.6 (2.1)
Blade Lift Height, mm (ft in) 772 (2 ft 6 in)
Digging Depth, mm (in) 528 (20.8)
Overall Width with Blade Angled, mm (ft in) not published
Blade Tilt, mm (ft in) 338 (1 ft 1 in)
Dimensions
Height w/ROPS, mm (ft in) 2747 (9 ft )
Length w/Dozer, mm (ft in) 3940 (12 ft 11 in)
Ground Clearance, mm (in) 345 (13.6)
Capacities
Fuel Tank, L (gal) 178 (47)
Hydraulic Reservoir, L (gal) 32.2 (8.5)
Weight
SAE Operating Weight, kg (lb) 7386 (16283)

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics