get multiple quotes Heavy Rentals Equipment on Facebook

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Haskins, Ohio

Do you need the latest, clean and well-maintained heavy construction equipment delivered to the jobsite in Haskins?

With us, you can gain instant access to a wide selection of construction tools and machineries. Yes, since we have onboard a network of reliable vendors having a large ready-to-rent inventory of equipment, you will never to look anywhere else for heavy construction equipment rentals in Haskins.

Each time you need some extra machinery, accessories or tools, our vendors will have them delivered right to your jobsite, and on time. You may be in need of such machines and tools for just one day, a week or any length of time. Our vendors do not impose unrealistic or inflexible rental agreements on you.

Dial our toll free number today or submit the short contact form on the right to get started. Our vendors will start contacting you to learn about your exact requirements in no time.

Equipment Rental Haskins, Construction equipment rental Haskins, Construction Haskins, Heavy Equipment Rental Haskins .

Unable to parse entered address. API response code: REQUEST_DENIED

Komatsu Wheel Loaders WA470-7
WA470-7 Wheel Loader

The WA470-7 scores high marks for economy and power at the same time. Komatsu's Tier 4 interim technology ensures that the engine runs efficiently and saves fuel over the previous model. Selectable economy or power engine modes and SmartLoader Logic make sure the WA470-7 can be operated in the most efficient way. A large capacity torque converter with lock-up gives the WA470-7 tremendous power in the pile for filling the bucket and speed to climb ramps.

Engine
Model Komatsu SAA6D125E-6*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.9" x 5.9" 125 mm x 150 mm
Piston displacement 674 in³ 11.04 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 273 HP 204 kW
ISO 9249/SAE J1349 / Net 272 HP 203 kW
Rated rpm 2000 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Automatic, full-poweshift, counter-shaft type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.7 mph
7.6 km/h		 4.9 mph
7.9 km/h
2nd gear 8.1 mph
13.1 km/h		 8.4 mph
13.5 km/h
2nd gear (Lock-up clutch ON) 8.2 mph
13.2 km/h		 8.5 mph
13.7 km/h
3rd gear 14.2 mph
22.9 km/h		 14.7 mph
23.6 km/h
3rd gear (Lock-up clutch ON) 14.7 mph
23.6 km/h		 15.1 mph
24.3 km/h
4th gear 22.5 mph
36.2 km/h		 23.2 mph
37.3 km/h
4th gear (Lock-up clutch ON) 23.8 mph
38.3 km/h		 24.2 mph
39.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake* Wet disc brake
*May be used in an emergency
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 35° each direction (40° to max end stop)
Minimum turning radius at the center of outside tire 21'9" 6630 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity 51.5 U.S. gal/min 195 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.5" x 17.3" 90 mm x 441 mm
Loader control:
Hydraulic pump Piston pump
Capacity 68.7 U.S. gal/min 260 ltr/min
Relief valve setting 4,980 psi 34.3 MPa / 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders—bore x stroke:
Boom cylinder — 2 5.5" x 30.0" 140 mm x 764 mm
Bucket cylinder — 1 6.3" x 22.6" 160 mm x 575 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket)
Raise 6.1 s
Dump 1.6 sec
Lower (Empty) 3.1 sec
Service Refill Capacities
Cooling system 21.1 U.S. gal 80 ltr
Fuel tank 100.4 U.S. gal 380 ltr
Engine 10.0 U.S. gal 38 ltr
Hydraulic system 45.7 U.S. gal 173 ltr
Axle front 15.1 U.S. gal 57 ltr
Axle rear 14.8 U.S. gal 56 ltr
Torque converter and transmission 17.2 U.S. gal 65 ltr

Komatsu Wheel Loaders WA380-7
WA380-7 Wheel Loader

The Tier 4 interim WA380-7 will save you 10% on your fuel bill over the previous model. Two engine power modes, power and economy, let the operator match his work mode to the job at hand. The large capacity torque converter with enhanced lock-up gives the WA380-7 terrific digging power in the pile and climbing ability. SmartLoader Logic ensure that the WA380-7 works most efficiently under low demand conditions to ensure further energy and fuel savings.

Engine
Model Komatsu SAA6D107E-2*
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 4.21" x 4.88" 107 mm x 124 mm
Piston displacement 408 in3 6.69 ltr
Governor All-speed, electronic
Horsepower:
SAE J1995 / Gross 192 HP 143 kW
ISO 9249/SAE J1349 / Net 191 HP 142 kW
Rated rpm 2100 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
*EPA Tier 4 Interim and EU stage 3B emissions certified
Transmission
Torque converter 3-elements, 1-stage, 2-phase
Transmission Automatic, full-poweshift, counter-shaft type
Travel speed: (Measured with 23.5-25 tires) Forward Reverse
1st gear 4.1 mph
6.6 km/h		 4.4 mph
7.1 km/h
2nd gear 7.3 mph
11.7 km/h		 7.7 mph
12.4 km/h
2nd gear (Lock-up clutch ON) 7.7 mph
12.4 km/h		 8.3 mph
13.3 km/h
3rd gear 13.0 mph
20.9 km/h		 13.9 mph
22.3 km/h
3rd gear (Lock-up clutch ON) 14.0 mph
22.5 km/h		 15.0 mph
24.1 km/h
4th gear 22.4 mph
36.1 km/h		 24.0 mph
38.6 km/h
4th gear (Lock-up clutch ON) 24.9 mph
40.0 km/h		 24.9 mph
40.0 km/h
Axles and Final Drives
Drive system Four-wheel drive
Front Fixed, semi-floating
Rear Center-pin support, semi-floating, 26° total oscillation
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically-actuated, wet disc brakes actuate on four wheels.
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, fully-hydraulic power steering
Steering angle 35° (40° to max end stop)
Minimum turning radius at the center of outside tire 20'9" 6320 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 36.2 U.S. gal/min 137 ltr/min
Relief valve setting 3,555 psi 24.5 MPa / 250 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 3.0" x 17.4" 75 mm x 442 mm
Loader control:
Hydraulic pump Gear type pump
Capacity at rated rpm 54.13 U.S. gal/min 204.9 ltr/min
Relief valve setting 4,550 psi 31.4 MPa / 320 kgf/cm2
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders bore x stroke bore x stroke
Lift cylinder - 2 5.1" x 28.1" 130 mm x 713 mm
Bucket cylinder - 1 5.9" x 21.1" 150 mm x 535 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket):
Raise 5.9 sec
Dump 1.8 sec
Lower (Empty) 3.3 sec
Service Refill Capacities
Cooling system 14.4 U.S. gal 54.4 ltr
Fuel tank 79.3 U.S. gal 300 ltr
Engine 6.1 U.S. gal 23 ltr
Hydraulic system 37.5 U.S. gal 142 ltr
Axle (each front and rear) 10.6 U.S. gal 40 ltr
Torque converter and transmission 14.3 U.S. gal 54 ltr

Komatsu Wheel Loaders WA600-6 Steel Mill
WA600-6 Steel Mill Wheel Loader

Komatsu-integrated design for exceptional value, reliability and versatility. Hydraulics, powertrain, frame, and all other major components are engineered by Komatsu. You get a machine whose components are designed to work together for higher production and reliability. Now add the Komatsu designed Steel Mill Arrangement with guarding and heat protection specifically matched to the WA600-6 resulting in a loader that handles hot slag and stays working longer for increased productivity.

Engine
Model Komatsu SAA6D170E-5
Type Water-cooled, 4-cycle
Aspiration Turbo-charged, after-cooled, cooled EGR
Number of cylinders 6
Bore x stroke 6.69" x 6.69" 170 mm x 170 mm
Piston displacement 1413 in³ 23.15 ltr
Governor All-speed, electronic
Horsepower:
SAEJ1995 - Gross 530 HP 396 kW
ISO 9249 / SAEJ1349 - Net 527 HP 393 kW
Rated rpm 1800 rpm
Fan drive method for radiator cooling Hydraulic
Fuel system Direct injection
Lubrication system:
Method Gear pump, force-lubrication
Filter Full-flow type
Air cleaner Dry type with double elements and dust evacuator, plus dust indicator
EPA Tier 3 and EU stage 3A emissions certified.
Transmission
Torque converter Type 3-element, single-stage, double-phase
Transmission Type Full-powershift, planetary type
Travel speed measured with 35/65-33 tires: Forward Reverse
1st 4.2 mph
6.7 km/h		 4.5 mph
7.3 km/h
2nd 7.3 mph
11.7 km/h		 8.0 mph
12.8 km/h
3rd 12.6 mph
20.3 km/h		 13.7 mph
22.0 km/h
4th 21.0 mph
33.8 km/h		 23.0 mph
37.0 km/h
Axles and Final Drives
Drive system Four-wheel drive.
Front Fixed, full-floating.
Rear Center-pin support, full-floating, 26° total oscillation.
Reduction gear Spiral bevel gear
Differential gear Conventional type
Final reduction gear Planetary gear, single reduction
Brakes
Service brakes Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake Wet disc brake
Emergency brake Parking brake is commonly used
Steering System
Type Articulated type, full-hydraulic power steering
Steering angle 43° each direction.
Minimum turning radius at the center of outside tire 23'3" 7075 mm
Hydraulic System
Steering system:
Hydraulic pump Piston pump
Capacity at rated rpm 43.1 U.S. gal/min 163 ltr/min
Relief valve setting 4,980 psi 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type.
Number of cylinders 2
Bore x stroke 4.5" x 20" 115 mm x 510 mm
Loader control:
Hydraulic pump Piston pump
Capacity at rated rpm 63.1 + 63.1 U.S. gal/min 239 + 239 ltr/min
Relief valve setting 4,980 psi 350 kgf/cm²
Hydraulic cylinders:
Type Double-acting, piston type
Number of cylinders: Bore x Stroke: Bore x Stroke:
Boom cylinder / 2 7.9" x 42" 200 mm x 1067 mm
Bucket cylinder / 1 8.9" x 30.6" 225 mm x 776 mm
Control valve 2-spool type
Control positions:
Boom Raise, hold, lower, and float
Bucket Tilt-back, hold, and dump
Hydraulic cycle time (rated load in bucket)
Raise 9.3 sec
Dump 2.3 sec
Lower (Empty) 4.1 sec
Service Refill Capacities
Cooling system 38.8 U.S. gal 147 ltr
Fuel tank 189.7 U.S. gal 718 ltr
Engine 22.7 U.S. gal 86 ltr
Hydraulic system 117.0 U.S. gal 443 ltr
Axle (each front and rear) 41.0 U.S. gal 155 ltr
Torque converter and transmission 21.9 U.S. gal 83 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics