Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Construction Equipment Rental in Davis, Oklahoma

We can help you find the best heavy construction equipment rentals in Davis. So, while you concentrate on the construction project at hand, you can leave the task of provisioning ladder planks, concrete equipment, excavators, lifts, etc. to our vendors.

We understand that you and may other contractors do not wish to buy new equipment to keep your credit lines strong and cash flow healthy. Having served construction industry players for a long time now, we have formed a network of suppliers and vendors with huge fleets of work-ready machines and tools.

Depending on the timeframe for which you need the equipment, you can choose to rent construction machines in Davis for a day, week or several months at a stretch. Yes, rental agreements are flexible and no, you don’t have to worry about the maintenance costs. To know more, dial our toll free number today.

You can also contact us by filling out the contact form (on the right). One of our support staff members will get back to you in no time.

Equipment Rental Davis, Construction equipment rental Davis, Construction Davis, Heavy Equipment Rental Davis.

Komatsu Dozers D65WX-17 WH

D65WX-17 WH Waste Handling Dozer

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

Komatsu Dozer D275AX-5
D275AX-5
The pushing power and production of the D275AX-5 comes from the 452 horsepower its Komastu engine produces and the lock-up torque converter. Other features such as hydrostatic steering and K-bogie system give the D275AX-5 the maneuverability to keep up with fast scraper pushing as well as tough ripping. To make the D275AX-5 even more productive, the unique Sigma dozer blade can be mounted to produce 15% more than a conventional blade.

Engine
Model Komatsu SAA6D140E-5
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, air-to-air aftercooled, cooled EGR
Number of cylinders 6
Bore x stroke 5.51" x 6.50" 140 mm x 165 mm
Piston displacement 930 in³ 15.24 ltr
Governor All-speed, electronic
Horsepower :
SAE J1995 - Gross 452 HP 337 kW
ISO 9249 / SAE J1349 - Net 449 HP 335 kW
Hydraulic fan at maximum speed - Net 410 HP 306 kW
Rated rpm 2000 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubrication
Filter Full-flow
TORQFLOW Transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 1-phase, torque converter with lockup clutch and a planetary gear, multiple-disc clutch transmission which is hydraulically-actuated and force-lubricated for optimum heat dissipation. Gearshift lock lever and neutral safety switch help prevent accidental starts.
Gear Forward Reverse
1st 2.2 mph / 3.6 km/h 2.9 mph / 4.7 km/h
2nd 4.2 mph / 6.7 km/h 5.4 mph / 8.7 km/h
3rd 7.0 mph / 11.2 km/h 9.3 mph / 14.9 km/h
Final Drive
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket rims are bolt-on for easy replacement.
Steering System
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to the left to make a left turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius 12'10 3.9 m
Undercarriage
K-Bogie undercarriage
Lubricated track rollers are resiliently mounted on the track frame with a bogie suspension system whose oscillating motion is cushioned by rubber pads.Track shoes
Lubricated tracks. Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearance for extended service. Track tension easily adjusted with grease gun.
Suspension Oscillating equalizer bar and pivot shaft
Track roller frame Cylindrical, high-tensile-strength steel construction
Rollers and idlers Lubricated track rollers
K-Bogie undercarriage Lubricated track rollers are resiliently mounted to the roller frame with a series of K-Bogies whose oscillating motion is cushioned by rubber pads.
Extreme service track shoes Lubricated tracks. Unique seals help prevent entry of foreign abrasive material into pin-to-bushing clearances to provide extended service life. Track tension is easily adjusted with a grease gun.
Number of shoes (each side) 39
Grouser height:
Single grouser 3.5'' 88 mm
Shoe width (standard) 24'' 610 mm
Ground contact area 6,580 in² 42456 cm²
Ground pressure (tractor only) 12.7 psi 87.3 kPa / 0.89 kg/cm²
No. of track rollers 7
No. of carrier rollers 2
Extreme service shoes 24" 610 mm
Additional weight 0 lb 0 kg
Ground contact area 6,580 in² 42456 cm²
SIGMADOZERTM Strengthened Dual tilt Ground pressure** 17.2 psi 119 kPa / 1.21 kg/cm²
Semi-U tilt dozer Ground pressure** 16.6 psi 115 kPa / 1.17 kg/cm²
Extreme service shoes 28'' 710 mm
Additional weight 1,260 lb 570 kg
Ground contact area 7,659 in² 49416 cm²
SIGMADOZERTM Strengthened Dual tilt Ground pressure** 15.0 psi 103 kPa / 1.05 kg/cm²
Semi-U tilt dozer Ground pressure** 14.5 psi 100 kPa / 1.02 kg/cm²
Extreme service shoes 30'' 760 mm
Additional weight 1,870 lb 850 kg
Ground contact area 8,199 in² 52896 cm²
SIGMADOZERTM Strengthened Dual tilt Ground pressure** 14.1 psi 97 kPa / 0.99 kg/cm²
Semi-U tilt dozer Ground pressure** 13.7 psi 94 kPa / 0.96 kg/cm²
** Ground pressure based on tractor, cab, ROPS, operator, giant ripper, standard equipment, and shoe and blade shown in the chart.
Coolant and Lubricant Capacity (refill)
Fuel tank 222 U.S. gal 840 ltr
Coolant 26.4 U.S. ga 100 ltr
Engine 13.7 U.S. gal 52.0 ltr
Torque converter, transmission, bevel gear, and steering system 23.8 U.S. gal 90 ltr
Final drive (each side) 10.6 U.S. gal 40 ltr
Operating Weight
Tractor weight - Including rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 83,070 lb 37680 kg
Operating weight - Including Strengthened Dual tilt SIGMADOZERTM, giant ripper, steel cab, ROPS, operator, standard equipment, rated capacity of lubricant, coolant, and full fuel tank. 113,600 lb 51530 kg
Ground pressure 17.2 psi 119 kPa / 1.21 kg/cm²
Hydraulic System
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control units: All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 230 ltr/min / 60.8 U.S. gal/min at rated engine rpm.
Relief valve setting 3,980 psi 27.5 MPa / 280 kg/cm²
Control valves: Spool control valves for SIGMADOZERTM, Semi-U tilt and Full-U tilt dozer
Positions:
Blade lift Raise, hold, lower, and float.
Blade tilt Right, hold, and left.
Note: Additional control valve required for variable digging angle multi-shank ripper and giant ripper.
Positions:
Ripper lift Raise, hold, and lower.
Ripper tilt Increase, hold, and decrease.
Hydraulic cylinders Double-acting, piston.
Hydraulic cylinders/ Number of cylinders: Bore Bore
Blade lift / 2 4.72'' 120 mm
Blade tilt / 1(Single tilt), 2(Dual tilt) 7.09'' 180 mm
Ripper lift / 2 7.09'' 180 mm
Ripper tilt / 2 6.30'' 160 mm
Hydraulic oil capacity (refill):
SIGMADOZERTM, Semi-U dozer, or U dozer 34.3 U.S. gal 130 ltr
Ripper equipment (additional volume):
Giant ripper 10.0 U.S. gal 38 ltr
Multi-shank ripper 10.0 U.S. gal 38 ltr

Komatsu Dozers D65WX-17

D65WX-17 Crawler Dozer

The wide track D65WX-17 has all the same great features as the D65 E and P machines but uses the standard length track of the EX with the wider track of the LGP PX. The D65WX gives the extra stability some applications such as slope work require without having to go to a low ground pressure shoe. The D65WX-17 can be equipped with the inside mount power angle tilt blade or the outside mount Sigma.

Engine
Model Komatsu SAA6D114E-5*
Type 4-cycle, water-cooled, direct injection
Aspiration Komatsu variable geometry Turbocharged, air-to-air aftercooled
Number of cylinders 6
Bore x stroke 4.49" x 5.69" 114 mm x 144.5 mm
Piston displacement 540 in³ 8.85 ltr
Governor All-speed and mid-range, electronic
Horsepower
SAE J1995 - Gross 207 HP 155 kW
(ISO 14396 205 HP 153 kW
ISO 9249 / SAE J1349 - Net 186 HP 139 kW
Rated rpm 1950 rpm
Fan drive type Hydraulic
Lubrication system:
Method Gear pump, force lubricationn
Filter Full-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
TORQFLOW transmission
Komatsu TORQFLOW transmission consists of a water-cooled, 3-element, 1-stage, 2-phase, torque converter with lockup clutch, and a planetary gear, multiple-disc clutch transmission which is electronically controlled, hydraulically actuated and force-lubricated for optimum heat dissipation. Shift lock lever and neutral safety switch.
Travel speed Forward Reverse
1st 2.2 mph
3.6 km/h
2.7 mph
4.4 km/h
2nd 3.4 mph
5.5 km/h
4.1 mph
6.6 km/h
3rdL 4.5 mph
7.2 km/h
5.3 mph
8.6 km/h
3rd 7.0 mph
11.2 km/h
8.3 mph
13.4 km/h
STEERING SYSTEM
Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
Hydrostatic Steering System (HSS) is powered by steering planetary units and a hydraulic pump and motor. Counter-rotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
Minimum turning radius:
D65EX-17 6'3" 1.9 m
D65EX-17 with PAT 6'7" 2.0 m
D65PX-17 7'3" 2.2 m
D65WX-17 6'11" 2.1 m
Undercarriage
Suspension Oscillating-type with equalizer bar and pivot shafts
Track roller frame Monocoque, large section, durable construction
Rollers and idlers Lubricated
Track shoes Parallel Link Undercarriage System (PLUS) with lubricated rotating bushings for extended system wear life and lower maintenance costs. Track tension is easily adjusted with grease gun.
FINAL DRIVE
Double-reduction final drive of spur and planetary gear sets to increase tractive effort and reduce gear tooth stresses for long final drive life. Segmented sprocket teeth are bolt-on for easy replacement.
HYDRAuLIC SYSTEM
Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.

Hydraulic control units:
All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 248 ltr/min / 65.5 U.S. gal/min at rated engine rpm.

Relief valve setting 4,050 psi 27.9 MPa / 285 kg/cm²
Control valves:
Spool control valves for SIGMADOZER or straight tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Rear attachment Raise, hold, and lower
Spool control valves for Power Angle Tilt dozer
Positions:
Blade lift Raise, hold, lower, and float
Blade tilt Right, hold, and left
Blade angle Right, hold, and left
Rear attachment Raise, hold, and lower
Hydraulic cylinders Double-acting, piston
Number of cylinders - SIGMADOZER Straight Tilt Dozer: Bore:
Blade lift - 2 3.3" 85 mm
Blade tilt - 1 4.9" 125 mm
Blade angle - 2 N/A
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 39° - 53°
Number of cylinders - Power Tilt Dozer: Bore:
Blade lift - 2 3.5" 90 mm
Blade tilt - 1 5.1" 130 mm
Blade angle - 2 4.3" 110mm
Ripper lift - 1 4.9" 125 mm
Pitch angle - 1 52° - 58°
Hydraulic oil capacity (refill): 14.5 U.S. ga 55 ltr
Ripper equipment (additional volume):
Multi-shank ripper 1.8 U.S. ga 7 ltr
SERVICE REFILL CAPACITIES
Fuel tank 109.6 U.S. gal 415 ltr
Coolant 14.3 U.S. gal 54 ltr
Engine 6.6 U.S. gal 25 ltr
Torque converter, transmission, bevel gear, and steering system 12.7 U.S. gal 48 ltr
Final drive (each side):
D65EX-17 4.4 U.S. gal 16.5 ltr
D65EX-17 with PAT 4.4 U.S. gal 16.5 ltr
D65PX-17 5.8 U.S. gal 22 ltr
D65WX-17 5.8 U.S. gal 22 ltr

Comments are closed.

Save Hundreds on Your Rentals

Fill out our form - takes 30 seconds - Enjoy Competing Quotes

Web Analytics